| Paragraph | Page | |
|---|---|---|
| 5.4.1 | Test Item Operating. | PART ONE-19 |
| 5.4.2 | Test Item Non-Operating. | PART ONE-19 |
| 5.5 | Test Sequence. | PART ONE-19 |
| 5.6 | Test Level Derivation. | PART ONE-19 |
| 5.7 | Pretest Information for Facility Operators. | PART ONE-19 |
| 5.8 | Test Setup. | PART ONE-19 |
| 5.8.1 | Installing the Test Item in Test Facility. | PART ONE-19 |
| 5.8.2 | Test Item Operation. | PART ONE-20 |
| 5.9 | Pretest Baseline Data. | PART ONE-20 |
| 5.10 | Information During Test. | PART ONE-20 |
| 5.11 | Interrupted Tests. | PART ONE-20 |
| 5.11.1 | In-Tolerance Interruptions. | PART ONE-20 |
| 5.11.2 | Out-of-Tolerance Interruptions | PART ONE-20 |
| 5.11.3 | Interruption Due to Test Item Operation Failure.. | PART ONE-21 |
| 5.11.4 | Scheduled Interruptions. | PART ONE-21 |
| 5.12 | Combined Tests. | PART ONE-21 |
| 5.13 | Post-Test Data. | PART ONE-21 |
| 5.14 | Environmental Effects and Failure Criteria. | PART ONE-23 |
| 5.15 | Environmental Test Reports. | PART ONE-23 |
| 5.16 | Water Purity. | PART ONE-23 |
| 5.17 | Analysis of Results. | PART ONE-23 |
| 5.18 | Monitoring. | PART ONE-24 |
| 5.18.1 | Monitoring Test Chamber Parameters. | PART ONE-24 |
| 5.18.2 | Monitoring the Item Under Test. | PART ONE-24 |
| 5.19 | Total High Temperature Exposure Duration. | PART ONE-24 |
| 5.20 | Temperature Change Rate. | PART ONE-25 |
| 6. | NOTES.. | PART ONE-25 |
| 6.1 | Intended Use. | PART ONE-25 |
| 6.2 | Acquisition Requirements. | PART ONE-25 |
| 6.3 | Subject Term (Key Word) Listing | PART ONE-25 |
| 6.4 | International Standardization Agreement Implementation | PART ONE-26 |
| 6.5 | Changes from Previous Issue. | PART ONE-26 |
Loading…