528.1-6 GUIDANCE DOCUMENTS
Table 528.1B-I lists documents that provide design guidance and definitions in the field of vibration.
| AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI) | |
|---|---|
| S1.1 | - Acoustical Terminology |
| S2.4 | - 1990, American Standard Methods for the Specifying of Characteristics of Auxiliary Analog Equipment for Shock and Vibration |
| S2.5 | - 1990, American Standard Methods for Specifying the Performance of Vibration Machines |
| S2.7 | - 1990, American Standard Terminology for Balancing Rotating Machinery |
| S2.19 | - Mechanical Vibration - Balance Quality Requirements of Rigid Rotors, Part 1: Determination of Permissible Residual Unbalance, Including Marine Applications |
| S2.25 | - Guide for the Measurement, Reporting, and Evaluation, of Hull and Superstructure Vibration in Ships |
| INTERNATIONAL STANDARDS ORGANIZATION (ISO) | |
| 1940/1 | - 1986, Mechanical Vibration - Balance Quality Requirements of Rigid Rotors - Part 1: Determination of Permissible Residual Unbalance |
| DEPARTMENT OF DEFENSE | |
| SPECIFICATIONS | |
| MIL-M-17185 | - Mounts, Resilient; General Specifications and Tests for (Shipboard Application) |
| STANDARDS | |
| MIL-STD-740-2 | - Structureborne Noise Measurements and Acceptance Criteria of Shipboard Equipment |
| NAVAL SEA SYSTEMS COMMAND (NAVSEA) PUBLICATIONS | |
| NAVSHIPS 94323 | - Maintainability Design Criteria Handbook for Design of Shipboard Electronic Equipment |
| NAVSHIPS 0967- 316-8010 | - BUSHIPS Reliability Design Handbook (Electronics) |
| NAVSHIPS 0967- 309-3010 | - Design of Shock and Vibration Resistant Electronic Equipment for Shipboard Use |
| NAVSEA 0900- LP-090-3010 | - Guideline to Military Standard MIL-STD-167-1 (SHIPS) Mechanical Vibrations of Shipboard Equipment, December 1993 |
| SVM-18 | - Shock and Vibration Design Manual, Naval Sea Systems Command, April 2001 |
Downloaded from https://www.everyspec.com
MIL-STD-810H
METHOD 528.1 ANNEX B
(This page is intentionally blank.)
MIL-STD-810H
PART THREE PART THREE – WORLD CLIMATIC REGIONS – GUIDANCE
Paragraph
Page
SECTION I – INTRODUCTION PART THREE-1
| 1. | SCOPE | PART THREE-1 |
|---|---|---|
| 1.1 | Purpose | PART THREE-1 |
| 1.2 | Part Three Organization | PART THREE-1 |
| 1.3 | Application | PART THREE-1 |
| 1.4 | General Guidance | PART THREE-2 |
| 1.5 | Limitations (AR 70-38) | PART THREE-2 |
SECTION II – DISTRIBUTION OF CLIMATIC DESIGN TYPES PART THREE-3
| 2. | DISTRIBUTION OF CLIMATIC DESIGN TYPES. | PART THREE-3 |
|---|---|---|
| 2.1 | Hot climatic design type (A1 and B3) | PART THREE-3 |
| 2.2 | Basic climatic design type | PART THREE-3 |
| 2.3 | Cold and severe cold design types. | PART THREE-4 |
| 2.4 | Absolute maximum and minimum temperatures | PART THREE-4 |
SECTION III – NATURAL AND INDUCED ENVIRONMENT – VARIOUS ELEMENTS ... PART THREE-8
| 3. | NATURAL AND INDUCED ENVIRONMENT AND ASSOCIATED |
| ELEMENTS PART THREE-8 | |
| 3.1 | Frequency of occurrence PART THREE-8 |
| 3.2 | Worldwide surface environment (summary of daily cycles) PART THREE-8 |
| 3.2.1 | Acceptable materiel operation PART THREE-8 |
| 3.2.2 | Climatic testing PART THREE-9 |
| 3.2.3 | Laboratory climatic tests PART THREE-9 |
| 3.2.4 | Accelerated and aggravated tests PART THREE-9 |
528.1-6 REFERENCED / RELATED DOCUMENTS
6.1 Referenced Documents
| a. | MIL-M-17191 | Mounts, Resilient: Portsmouth Bonded Spool Type (1970) |
| b. | MIL-M-17508 | Mounts, Resilient: Types 6E100, 6E150, 7E450, 6E900, 6E2000, 5E3500, 6E100BB, 6E150BB, 7E450BB, and 6E900BB |
| c. | MIL-M-24476 | Mounts, Resilient: Pipe Support, Types 7M50, 6M150, 6M450, 6M900, and 5M3500 |
| d. | MIL-M-19379 | Mounts, Resilient, Mare Island Types 11M15, 11M25, and 10M50 (1961) |
| e. | MIL-M-19863 | Mount, Resilient: Type 5B5, 000H |
| f. | MIL-M-21649 | Mount, Resilient, Type 5M10, 000-H |
| g. | MIL-STD-167-1A | Mechanical Vibrations of Shipboard Equipment (Type 1 – Environmental and Type II – Internally Excited) |
| h. | MIL-STD-167-2A | Mechanical Vibrations of Shipboard Equipment (Reciprocating Machinery and Propulsion System and Shafting) Types III, IV, and V (Controlled Distribution) |
| i. | MIL-STD-740-2 | Structureborne Vibratory Acceleration Measurements Acceptance Criteria of Shipboard Equipment |
| j. Handbook for Dynamic Data Acquisition and Analysis, IEST-RD-DTE012.2; Institute of Environmental Sciences and Technology, Arlington Place One, 2340 S. Arlington Heights Road, Suite 100, Arlington Heights, IL 60005-4516; Institute of Environmental Sciences and Technology Website. | ||
| k. NATO STANAG 4570, Evaluating the Ability of Equipment to Meet Extended Life Requirements; 2004; Information Handling Services Website. | ||
| l. | NATO Allied Environmental Engineering and Test Publication (AECTP) 600, | “A Ten Step Method for Evaluating the Ability of Equipment to Meet Extended Life Requirements”; December 2004; Leaflet 604; NATO Website. |
(Copies of these documents are available online at https://assist.dla mil.
528.1-6.1 Referenced documents
- a. MIL-HDBK-310, Global Climatic Data for Developing Military Products, 23 June 1997.
- b. Environmental Standards for Materiel Design Group of the AirLand Battlefield Environment Executive (ALBE) Committee (1987), "Environmental Factors and Standards for Atmospheric Obscurants, Climate, and Terrain," Washington, D.C.
- c. AR 70-38, Research, Development, Test and Evaluation of Materiel for Extreme Climatic Conditions, 1 August 1979; Army Forms and Publications Website.
- d. AMCP 706-115, Engineering Design Handbook, Environmental Series, Part 1, Basic Environmental Concepts, July 1974, DTIC Accession Number AD0784999.
- e. AMCP 706-116, Engineering Design Handbook, Environmental Series, Part 2, Natural Environmental Factors, April 1975, DTIC Accession Number ADA012648.
- f. AMCP 706-117, Engineering Design Handbook, Environmental Series, Part 3, Induced Environmental Factors, January 1976, DTIC Accession Number ADA023512.
- g. AMCP 706-118, Engineering Design Handbook, Environmental Series, Part 4, Life Cycle Environments, March 1975, DTIC Accession Number ADA015179.
- h. AMCP 706-119, Engineering Design Handbook, Environmental Series, Part 4, Life Cycle Environments, July 1975, DTIC Accession Number ADA015180.
- i. Krause, P.F. and K.L. Flood. 1997. Weather and Climate Extremes (Technical Report TEC-0099). Alexandria, VA: U.S. Army Topographic Engineering Center; Topographic Engineering Center Website.
- j. MIL-STD-210B, Climatic Information to Determine Design and Test Requirements for Military Systems and Equipment (S/S By MIL-HDBK-310)
6.2 Related Documents
See Annex B, Table 528.1B-I.
Egbert, Herbert W. "The History and Rationale of MIL-STD-810 (Edition 2)", December 2009; Institute of Environmental Sciences and Technology, Arlington Place One, 2340 S. Arlington Heights Road, Suite 100, Arlington Heights, IL 60005-4516.
(Copies of Department of Defense Specifications, Standards, and Handbooks, and International Standardization Agreements are available online at https://assist.dla mil.
Requests for other defense-related technical publications may be directed to the Defense Technical Information Center (DTIC), ATTN: DTIC-BR, Suite 0944, 8725 John J. Kingman Road, Fort Belvoir VA 22060-6218, 1-800-225-3842 (Assistance--selection 3, option 2), http://www.dtic.mil/dtic/; and the National Technical Information Service (NTIS), Springfield VA 22161, 1-800-553-NTIS (6847), http://www.ntis.gov/.
Downloaded from https://www.everyspec.com
MIL-STD-810H METHOD 528.1
(This page is intentionally blank.)
MIL-STD-810H
METHOD
528.1-6.2 Related documents
- a. NATO STANAG 4370, AECTP 230.
- b. NASA-HDBK-1001, Terrestrial Environment (Climatic) Criteria Guidelines for Use in Aerospace Vehicle Development, 11 August 2000.
- c. Egbert, Herbert W. "The History and Rationale of MIL-STD-810 (Edition 2)," December 2009; Institute of Environmental Sciences and Technology, Arlington Place One, 2340 S. Arlington Heights Road, Suite 100, Arlington Heights, IL 60005-4516.
(Copies of Department of Defense Specifications, Standards, and Handbooks, and International Standardization Agreements are available online at https://assist.dla.mil.
Requests for other defense-related publications may be directed to The Defense Technical Information Center (DTIC), ATTN: DTIC-BR, Suite 0944, 8725 John J. Kingman Road, Fort Belvoir VA 22060-6218, 1-800-225-3842 (Assistance--selection 3, option 2), http://stinet.dtic mil/info/s-stinet.html; and the National Technical Information Service (NTIS), Springfield VA 22161, 1-800-553-NTIS (6847), http://www.ntis.gov/.
MIL-STD-810H PART THREE ANNEX A