Annex A test considerations
MIL-STD-810H, Environmental Engineering Considerations and Laboratory Tests
Last Updated 29 Oct 2026
Hover any section to copy its link or text, ask Copilot about it, or bookmark it.
2 tables appear under this heading.
1. PDF page 306
| 1. | TEST ITEM MOUNTING FIXTURE | .A-1 |
| 1.1 | FIXTURE DESIGN CONSIDERATIONS. | .A-1 |
| 1.2 | FIXTURE MATERIALS AND CONSTRUCTION. | .A-5 |
| 1.3 | GENERAL CONSIDERATIONS IN CENTRIFUGE TESTING. | .A-5 |
| 2. | FAILURE DETECTION PROBLEMS. | ..A-6 |
| 3. | ACCELERATION AND FORCE CALCULATION | ..A-6 |
2. PDF page 306
| FIGURE 513.8A-1. | BASIC CENTRIFUGE TEST INSTALLATION RESULTING COMPRESSIVE LOAD CONDITIONS | A-2 |
| FIGURE 513.8A-2. | A TYPICAL CENTRIFUGE TEST INSTALLATION REQUIRING CONSIDERATION OF MOMENT EFFECTS IN INSTALLATION DESIGN | A-3 |
| FIGURE 513.8A-3. | BASIC CENTRIFUGE TEST INSTALLATION RESULTING IN TENSILE LOAD CONDITIONS | A-4 |
| FIGURE 513.8A-4. | BASIC FORCES IMPOSED ON TEST ITEM DUE TO ACCELERATIONS PRODUCED BY CENTRIFUGE | A-7 |