5 tables appear under this heading.
1. PDF page 548
| Paragraph | Page | |
|---|---|---|
| 1. | SCOPE | 1 |
| 1.1 | PURPOSE | 1 |
| 1.2 | APPLICATION | 1 |
| 1.3 | LIMITATIONS | 1 |
| 2. | TAILORING GUIDANCE. | 2 |
| 2.1 | SELECTING THE SHOCK METHOD. | 2 |
| 2.1.1 | EFFECTS OF SHOCK | 2 |
| 2.1.2 | SEQUENCE AMONG OTHER METHODS | 2 |
| 2.2 | SELECTING A PROCEDURE. | 3 |
| 2.2.1 | PROCEDURE SELECTION CONSIDERATIONS | 3 |
| 2.2.2 | DIFFERENCE AMONG PROCEDURES | 4 |
| 2.3 | DETERMINE TEST LEVELS AND CONDITIONS | 5 |
| 2.3.1 | GENERAL CONSIDERATIONS - TERMINOLOGY AND PROCESSING PROCEDURES WITH ILLUSTRATION. | 5 |
| 2.3.1.1 | THE SHOCK MODEL | 5 |
| 2.3.1.2 | LABORATORY SHOCK TEST OPTIONS | 7 |
| 2.3.2 | TEST CONDITIONS | 9 |
| 2.3.2.1 | SRS BASED ON MEASURED DATA | 10 |
| 2.3.2.2 | SRS IN THE ABSENCE OF MEASURED DATA | 10 |
| 2.3.2.3 | CLASSICAL SHOCK PULSE | 12 |
| 2.3.3 | TEST AXES AND NUMBER OF SHOCK EVENTS - GENERAL CONSIDERATIONS | 16 |
| 2.3.3.1 | SPECIAL CONSIDERATIONS FOR COMPLEX TRANSIENTS | 16 |
| 2.4 | TEST ITEM CONFIGURATION | 16 |
| 3. | INFORMATION REQUIRED | 16 |
| 3.1 | PRETEST | 16 |
| 3.2 | DURING TEST | 17 |
| 3.3 | POST-TEST | 17 |
| 4. | TEST PROCESS | 17 |
| 4.1 | TEST FACILITY | 17 |
| 4.2 | CONTROLS | 18 |
| 4.2.1 | CALIBRATION. | 18 |
| 4.2.2 | TOLERANCES | 18 |
| 4.2.2.1 | CLASSICAL PULSES AND COMPLEX TRANSIENT PULSE-TIME DOMAIN | 18 |
| 4.2.2.2 | COMPLEX TRANSIENT PULSES-SRS | 18 |
| 4.3 | TEST INTERRUPTION | 19 |
| 4.3.1 | INTERRUPTION DUE TO LABORATORY EQUIPMENT MALFUNCTION | 19 |
| 4.3.2 | INTERRUPTION DUE TO TEST ITEM OPERATION FAILURE | 19 |
| 4.4 | INSTRUMENTATION | 20 |
| 4.5 | DATA ANALYSIS | 21 |
| 4.6 | TEST EXECUTION | 22 |
| 4.6.1 | PREPARATION FOR TEST. | 22 |
| 4.6.1.1 | PRELIMINARY GUIDELINES | 22 |
| 4.6.1.2 | PRETEST CHECKOUT | 22 |
| 4.6.1.3 | PROCEDURES' OVERVIEW | 22 |
2. PDF page 549
| Paragraph | Page | |
|---|---|---|
| 4.6.2 | FUNCTIONAL SHOCK (PROCEDURE I) | 22 |
| 4.6.2.1 | TEST CONTROLS - FUNCTIONAL SHOCK (PROCEDURE I) | 24 |
| 4.6.2.2 | TEST TOLERANCES - FUNCTIONAL SHOCK (PROCEDURE I) | 24 |
| 4.6.2.3 | TEST PROCEDURE I - FUNCTIONAL SHOCK (PROCEDURE I) | 24 |
| 4.6.3 | TRANSPORTATION SHOCK (PROCEDURE II) | 25 |
| 4.6.3.1 | TEST CONTROLS - TRANSPORTATION SHOCK (PROCEDURE II) | 26 |
| 4.6.3.2 | TEST TOLERANCES - TRANSPORTATION SHOCK (PROCEDURE II) | 26 |
| 4.6.3.3 | TEST PROCEDURE - TRANSPORTATION SHOCK (PROCEDURE II) | 26 |
| 4.6.4 | FRAGILITY (PROCEDURE III) | 26 |
| 4.6.4.1 | TEST CONTROLS - FRAGILITY (PROCEDURE III) | 29 |
| 4.6.4.2 | TEST TOLERANCES - FRAGILITY (PROCEDURE III) | 30 |
| 4.6.4.3 | TEST PROCEDURE - FRAGILITY (PROCEDURE III) | 30 |
| 4.6.5 | TRANSIT DROP (PROCEDURE IV) | 31 |
| 4.6.5.1 | TEST CONTROLS - TRANSIT DROP (PROCEDURE IV) | 32 |
| 4.6.5.2 | TEST TOLERANCES - TRANSIT DROP (PROCEDURE IV) | 37 |
| 4.6.5.3 | TEST PROCEDURE - TRANSIT DROP (PROCEDURE IV) | 37 |
| 4.6.6 | CRASH HAZARD SHOCK (PROCEDURE V) | 38 |
| 4.6.6.1 | TEST CONTROLS - CRASH HAZARD SHOCK (PROCEDURE V) | 38 |
| 4.6.6.2 | TEST TOLERANCES - CRASH HAZARD SHOCK (PROCEDURE V) | 38 |
| 4.6.6.3 | TEST PROCEDURE - CRASH HAZARD SHOCK (PROCEDURE V) | 38 |
| 4.6.7 | BENCH HANDLING (PROCEDURE VI) | 39 |
| 4.6.7.1 | TEST CONTROLS - BENCH HANDLING (PROCEDURE VI) | 39 |
| 4.6.7.2 | TEST TOLERANCES - BENCH HANDLING (PROCEDURE VI) | 39 |
| 4.6.7.3 | TEST PROCEDURE - BENCH HANDLING (PROCEDURE VI) | 39 |
| 4.6.8 | PENDULUM IMPACT (PROCEDURE VII) | 39 |
| 4.6.8.1 | TEST CONTROLS - PENDULUM IMPACT (PROCEDURE VII) | 39 |
| 4.6.8.2 | TEST TOLERANCES - PENDULUM IMPACT (PROCEDURE VII) | 40 |
| 4.6.8.3 | TEST PROCEDURE - PENDULUM IMPACT (PROCEDURE VII) | 40 |
| 4.6.9 | CATAPULT LAUNCH/ARRESTED LANDING (PROCEDURE VIII) | 41 |
| 4.6.9.1 | TEST CONTROLS - CATAPULT LAUNCH/ARRESTED LANDING (PROCEDURE VIII) | 41 |
| 4.6.9.2 | TEST TOLERANCES - CATAPULT LAUNCH/ARRESTED LANDING (PROCEDURE VIII) | 43 |
| 4.6.9.3 | TEST PROCEDURE - CATAPULT LAUNCH/ARRESTED LANDING (PROCEDURE VIII) | 43 |
| 5. | ANALYSIS OF RESULTS | 44 |
| 6. | REFERENCE/RELATED DOCUMENTS | 44 |
| 6.1 | REFERENCED DOCUMENTS | 44 |
| 6.2 | RELATED DOCUMENTS | 45 |
3. PDF page 549
| FIGURE 516.8-1. | BASE INPUT SDOF SYSTEM MODEL FOR SHOCK CONSIDERATIONS. | 6 |
| FIGURE 516.8-2. | TEST SRS FOR USE IF MEASURED DATA ARE NOT AVAILABLE (FOR PROCEDURE I - FUNCTIONAL SHOCK, AND PROCEDURE V - CRASH HAZARD SHOCK TEST). | 11 |
| FIGURE 516.8-3. | TERMINAL PEAK SAWTOOTH SHOCK PULSE CONFIGURATION AND ITS TOLERANCE LIMITS | 13 |
| FIGURE 516.8-4. | TRAPEZOIDAL SHOCK PULSE CONFIGURATION AND TOLERANCE LIMITS. | 13 |
| FIGURE 516.8-5. | HALF-SINE SHOCK PULSE CONFIGURATION AND TOLERANCE LIMITS | 14 |
| FIGURE 516.8-6. | ILLUSTRATION OF TEMPORAL AND SPECTRAL DISTORTION ASSOCIATED WITH A COMPENSATED CLASSICAL TERMINAL PEAK SAWTOOTH | 15 |
| FIGURE 516.8-7. | TRAPEZOIDAL PULSE: VELOCITY CHANGE VERSUS DROP HEIGHT | 28 |
| FIGURE 516.8-8. | STANDARD DROP ORIENTATIONS FOR RECTANGULAR AND CYLINDRICAL PACKAGES. | 36 |
| FIGURE 516.8-9. | ILLUSTRATION OF EDGE DROP CONFIGURATION (CORNER DROP END VIEW IS ALSO ILLUSTRATED) | 37 |
4. PDF page 550
| Paragraph | Page |
|---|---|
| FIGURE 516.8-10. PENDULUM IMPACT TEST | 40 |
| FIGURE 516.8-11. SAMPLE MEASURED STORE THREE AXIS CATAPULT LAUNCH COMPONENT RESPONSE ACCELERATION TIME HISTORIES | 42 |
| FIGURE 516.8-12. SAMPLE MEASURED STORE THREE AXIS ARRESTED LANDING COMPONENT RESPONSE ACCELERATION TIME HISTORIES. | 43 |
5. PDF page 550
| TABLE 516.8-I. | SHOCK TEST PROCEDURES AND CONFIGURATIONS SUMMARY | 3 |
| TABLE 516.8-II. | LABORATORY TEST OPTIONS | 8 |
| TABLE 516.8-III. | TEST SHOCK RESPONSE SPECTRA FOR USE IF MEASURED DATA ARE NOT AVAILABLE | 11 |
| TABLE 516.8-IV. | TERMINAL PEAK SAWTOOTH DEFAULT TEST PARAMETERS FOR PROCEDURE I - FUNCTIONAL TEST (REFER TO FIGURE 516.8-3) | 23 |
| TABLE 516.8-V. | HSC STANDARDIZED REQUIREMENTS | 23 |
| TABLE 516.8-VI. | HSC LIMITED APPLICATION REQUIREMENTS BY CRAFT SIZE | 24 |
| TABLE 516.8-VII. | PROCEDURE II - TRANSPORTATION SHOCK TEST SEQUENCE | 25 |
| TABLE 516.8-VIII. | FRAGILITY SHOCK TRAPEZOIDAL PULSE PARAMETERS (REFER TO FIGURE 516.8-4) | 28 |
| TABLE 516.8-IX. | LOGISTIC TRANSIT DROP TEST | 33 |
| TABLE 516.8-X. | TACTICAL TRANSPORT DROP TEST | 34 |
| TABLE 516.8-XI. | SEVERE TACTICAL TRANSPORT TROP TEST | 35 |
| TABLE 516.8-XII. | FIVE STANDARD DROP TEST ORIENTATIONS | 36 |
| TABLE 516.8-XIII. | TERMINAL PEAK SAWTOOTH DEFAULT TEST PARAMETERS FOR PROCEDURE V - CRASH HAZARD (REFER TO FIGURE 516.8-3) | 38 |