MIL-STD-810H

Overview

MIL-STD-810H, Environmental Engineering Considerations and Laboratory Tests, published by the U.S. Department of Defense. Approved 2019-01-31. MIL-STD-810G w/Change 1. This edition is organised in 51 parts covering mechanical requirements; open any part below or from the panel on the left.

Table of Contents

1. 011 scope
2. 022 applicable documents
3. 033 definitions
4. 044 general program guidelines
5. 055 general laboratory test method guidelines
6. 066 notes
7. 07401 environmental engineering management plan (EEMP)
8. 08402 life cycle environmental profile (LCEP)
9. 09403.2.3 Details to be provided by the acquisition agency
10. 10404.3
11. 11405 detailed environmental test plans (DETP)
12. 12406.1 Purposes
13. 13406.2.1 General information
14. 14406.2.2 Content requirements
15. 15Method 500.6 method
16. 16Method 501.7 method
17. 17Method 502.7 method
18. 18Method 503.7 method
19. 19Method 504.3 contamination by fluids contents
20. 20Method 505.7 method
21. 21Method 506.6 rain contents
22. 22Method 507.6 method
23. 23Method 508.8 method
24. 24Method 509.7 contents - Continued
25. 25Method 510.7 method
26. 264.1.1 Test Levels and Conditions
27. 274.1.2 Information Required – Refer to Paragraphs 3.1 to 3.3
28. 284.1.3 Test Details
29. 294.1.4 Test Execution
30. 30Method 511.7 method
31. 31Method 512.6 immersion contents
32. 32Method 513.8 acceleration contents
33. 33Method 514.8 vibration contents
34. 34Method 515.8 method
35. 35Method 516.8 method
36. 36Method 517.3 method
37. 37Method 518.2 method
38. 38Method 519.8 method
39. 39Method 520.5 combined environments contents
40. 40Method 521.4 method
41. 41Method 522.2 ballistic shock contents
42. 42Method 523.4 method
43. 43Method 524.1 method
44. 44Method 525.2 contents - Continued
45. 45Method 526.2 rail impact contents
46. 46Method 527.2 method
47. 471.2 Application
48. 481.3 Limitations
49. 49Method 528.1 method
50. 50Tables
51. 51Formulas