Sand and dust contents Paragraph Page · MIL-STD-810H

2 tables appear under this heading.

1. PDF page 263

1.	SCOPE	1
1.1	PURPOSE	1
1.2	APPLICATION	1
1.3	LIMITATIONS	1
2.	TAILORING GUIDANCE	1
2.1	SELECTING THE SAND AND DUST METHOD	1
2.1.1	EFFECTS OF SAND AND DUST ENVIRONMENTS	2
2.1.2	SEQUENCE AMONG OTHER METHODS	2
2.2	SELECTING PROCEDURES	2
2.2.1	PROCEDURE SELECTION CONSIDERATIONS	2
2.2.2	DIFFERENCE AMONG PROCEDURES	3
2.3	DETERMINE TEST LEVELS AND CONDITIONS	3
2.3.1	IDENTIFY CLIMATIC CONDITIONS	3
2.3.2	DETERMINE EXPOSURE CONDITIONS	3
2.3.3	TEST ITEM CONFIGURATION	3
3.	INFORMATION REQUIRED	3
3.1	PRETEST	3
3.2	DURING TEST	4
3.3	POST-TEST	5
4.	TEST PROCESS	5
4.1	PROCEDURE I - BLOWING DUST	5
4.1.1	TEST LEVELS AND CONDITIONS	5
4.1.1.1	TEMPERATURE	5
4.1.1.2	RELATIVE HUMIDITY	5
4.1.1.3	AIR VELOCITY	5
4.1.1.4	DUST COMPOSITION	6
4.1.1.5	DUST CONCENTRATIONS	7
4.1.1.6	ORIENTATION	7
4.1.1.7	DURATION	7
4.1.1.8	OPERATION DURING TEST	7
4.1.2	INFORMATION REQUIRED - REFER TO PARAGRAPHS 3.1 TO 3.3	8
4.1.3	TEST DETAILS	8
4.1.3.1	TEST FACILITY	8
4.1.3.2	CONTROLS	8
4.1.3.3	TEST INTERRUPTION	9
4.1.4	TEST EXECUTION	9
4.1.4.1	PREPARATION FOR TEST	9
4.1.4.2	TEST PROCEDURE I. BLOWING DUST	10
4.2	PROCEDURE II - BLOWING SAND	11
4.2.1	TEST LEVELS AND CONDITIONS	11

Paragraph		Page
4.2.1.1	TEMPERATURE	11
4.2.1.2	AIR VELOCITY	11
4.2.1.3	SAND COMPOSITION	12
4.2.1.4	SAND CONCENTRATIONS	12
4.2.1.5	ORIENTATION	12
4.2.1.6	DURATION	12
4.2.1.7	OPERATION DURING TEST	12
4.2.2	INFORMATION REQUIRED - REFER TO PARAGRAPHS 3.1 TO 3.3	13
4.2.3	TEST DETAILS	13
4.2.3.1	TEST FACILITY	13
4.2.3.2	CONTROLS	13
4.2.3.3	TEST INTERRUPTION	13
4.2.4	TEST EXECUTION	14
4.2.4.1	PREPARATION FOR TEST	14
4.2.4.2	TEST PROCEDURE II. BLOWING SAND	15
5.	ANALYSIS OF RESULTS	16
5.1	BLOWING DUST TESTS	16
5.2	BLOWING SAND TESTS	16
6.	REFERENCE/RELATED DOCUMENTS	16
6.1	REFERENCED DOCUMENTS	16
6.2	RELATED DOCUMENTS	17