Detailed guidance on solar radiation testing · MIL-STD-810H

2 tables appear under this heading.

1. PDF page 155

1.	INTRODUCTION	A-1
2.	IRRADIANCE AND SPECTRAL DISTRIBUTION	A-1
2.1	IRRADIANCE	A-1
2.2	SPECTRAL DISTRIBUTION - SEA LEVEL VERSUS HIGH ALTITUDE	A-1
3.	OTHER ENVIRONMENTAL FACTORS TO BE CONSIDERED	A-1
4.	RADIATION SOURCES	A-1
4.1	GENERAL	A-1
4.2	FILTERS	A-2
4.3	UNIFORMITY OF IRRADIANCE	A-2
5.	MEASUREMENTS	A-2
5.1	MEASUREMENT OF SPECTRAL DISTRIBUTION	A-2
5.2	MEASUREMENT OF TEMPERATURE	A-2
6.	PREPARATION OF TEST FACILITY AND MATERIEL UNDER TEST	A-3
6.1	TEST FACILITY	A-3
6.2	MATERIEL UNDER TEST	A-3
6.3	GROUND REFLECTED RADIATION	A-3
7.	INTERPRETATION OF RESULTS	A-3
7.1	COMPARISON WITH FIELD EXPERIENCE	A-3
7.2	THERMAL EFFECTS	A-4
7.3	DEGRADATION OF MATERIALS	A-4
8.	HAZARDS AND PERSONNEL SAFETY	A-5
8.1	GENERAL	A-5
8.2	ULTRAVIOLET RADIATION	A-5
8.3	OZONE AND HARMFUL FUMES	A-5
8.4	RISK OF LAMP EXPLOSIONS	A-5
8.5	ELECTRIC SHOCK	A-5

ANNEX A TABLE
TABLE 505.7A-I	TEST PARAMETER TOLERANCES	A-3
METHOD 505.7, ANNEX B INSTRUMENTATION INSTALLATION, PLACEMENT AND GUIDANCE
INSTRUMENTATION		B-1
ANNEX B TABLE
TABLE 505.7B-I	INSTRUMENT ACCURACY.	B-2
METHOD 505.7, ANNEX C GUIDANCE ON TABLES AND FIGURES
EXAMPLES		C-1
ANNEX C TABLES
TABLE 505.7C-I	SPECTRAL ENERGY DISTRIBUTION AND PERMITTED TOLERANCE.	C-1
TABLE 505.7C-II	EXAMPLE CALCULATION OF SPECTRAL ENERGY DISTRIBUTION AND PERMITTED TOLERANCE..	C-6
ANNEX C FIGURES
FIGURE 505.7C-1	EXAMPLE OF ESTABLISHING TARGET AND UNIFORMITY LEVELS OVER SURFACE TARGET PLANE	C-2
FIGURE 505.7C-2	EXAMPLE 1 - FLAT SURFACE EXPOSURE	C-3
FIGURE 505.7C-3	EXAMPLE 2 - TEST ITEM SURFACE SHAPE EXPOSURE	C-4
FIGURE 505.7C-4	EXAMPLE 3 - MULTIPLE SOLAR SURFACE TARGET PLANES	C-5
FIGURE 505.7C-5	METHOD FOR CONDUCTING PROCEDURE I WITH SOLAR RADIATION CONTROLLED IN ONE-HOUR STEPS	C-7
FIGURE 505.7C-6	METHOD FOR CONDUCTING PROCEDURE I WITH SOLAR RADIATION CONTROLLED IN HALF-HOUR STEPS.	C-8