4 tables appear under this heading.
1. PDF page 1031
| AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI) | |
|---|---|
| S1.1 | - Acoustical Terminology |
| S2.4 | - 1990, American Standard Methods for the Specifying of Characteristics of Auxiliary Analog Equipment for Shock and Vibration |
| S2.5 | - 1990, American Standard Methods for Specifying the Performance of Vibration Machines |
| S2.7 | - 1990, American Standard Terminology for Balancing Rotating Machinery |
| S2.19 | - Mechanical Vibration - Balance Quality Requirements of Rigid Rotors, Part 1: Determination of Permissible Residual Unbalance, Including Marine Applications |
| S2.25 | - Guide for the Measurement, Reporting, and Evaluation, of Hull and Superstructure Vibration in Ships |
| INTERNATIONAL STANDARDS ORGANIZATION (ISO) | |
| 1940/1 | - 1986, Mechanical Vibration - Balance Quality Requirements of Rigid Rotors - Part 1: Determination of Permissible Residual Unbalance |
| DEPARTMENT OF DEFENSE | |
| SPECIFICATIONS | |
| MIL-M-17185 | - Mounts, Resilient; General Specifications and Tests for (Shipboard Application) |
| STANDARDS | |
| MIL-STD-740-2 | - Structureborne Noise Measurements and Acceptance Criteria of Shipboard Equipment |
| NAVAL SEA SYSTEMS COMMAND (NAVSEA) PUBLICATIONS | |
| NAVSHIPS 94323 | - Maintainability Design Criteria Handbook for Design of Shipboard Electronic Equipment |
| NAVSHIPS 0967- 316-8010 | - BUSHIPS Reliability Design Handbook (Electronics) |
| NAVSHIPS 0967- 309-3010 | - Design of Shock and Vibration Resistant Electronic Equipment for Shipboard Use |
| NAVSEA 0900- LP-090-3010 | - Guideline to Military Standard MIL-STD-167-1 (SHIPS) Mechanical Vibrations of Shipboard Equipment, December 1993 |
| SVM-18 | - Shock and Vibration Design Manual, Naval Sea Systems Command, April 2001 |
2. PDF page 1033
| 1. | SCOPE | PART THREE-1 |
|---|---|---|
| 1.1 | Purpose | PART THREE-1 |
| 1.2 | Part Three Organization | PART THREE-1 |
| 1.3 | Application | PART THREE-1 |
| 1.4 | General Guidance | PART THREE-2 |
| 1.5 | Limitations (AR 70-38) | PART THREE-2 |
3. PDF page 1033
| 2. | DISTRIBUTION OF CLIMATIC DESIGN TYPES. | PART THREE-3 |
|---|---|---|
| 2.1 | Hot climatic design type (A1 and B3) | PART THREE-3 |
| 2.2 | Basic climatic design type | PART THREE-3 |
| 2.3 | Cold and severe cold design types. | PART THREE-4 |
| 2.4 | Absolute maximum and minimum temperatures | PART THREE-4 |
4. PDF page 1033
| 3. | NATURAL AND INDUCED ENVIRONMENT AND ASSOCIATED |
| ELEMENTS PART THREE-8 | |
| 3.1 | Frequency of occurrence PART THREE-8 |
| 3.2 | Worldwide surface environment (summary of daily cycles) PART THREE-8 |
| 3.2.1 | Acceptable materiel operation PART THREE-8 |
| 3.2.2 | Climatic testing PART THREE-9 |
| 3.2.3 | Laboratory climatic tests PART THREE-9 |
| 3.2.4 | Accelerated and aggravated tests PART THREE-9 |