| Paragraph | Page |
|---|---|
| 6. REFERENCE/RELATED DOCUMENTS | 10 |
| 6.1 REFERENCED DOCUMENTS | 10 |
| 6.2 RELATED DOCUMENTS | 11 |
| TABLES | |
| TABLE 509.7-I. AIR PRESSURE AND PREHEAT TEMPERATURE REQUIREMENTS FOR OPERATION AT 35 °C (95 °F). | 5 |
| TABLE 509.7-II. TEMPERATURE VERSUS DENSITY DATA. | 8 |
| FIGURES | |
| FIGURE 509.7-1 LOCATION OF SALT SOLUTION FILTER. | 4 |
| FIGURE 509.7-2 SALT SOLUTION FILTER. | 5 |
| FIGURE 509.7-3 VARIATIONS OF DENSITY OF SALT (NACL) SOLUTION WITH TEMPERATURE. | 7 |
MIL-STD-810H METHOD 509.7
METHOD
509.7 SALT FOG
NOTE: Tailoring is essential. Select methods, procedures, and parameter levels based on the tailoring process described in Part One, paragraph 4.2.2, and Annex C. Apply the general guidelines for laboratory test methods described in Part One, paragraph 5 of this standard.