Ti-13V-11Cr-3Al
| Specification | Form |
|---|---|
| AMS-T-9046 | Sheet, strip, and plate |
| MIL-T-9047a | Bar |
a Inactive for new design
5.5.1.0 (b). Design Mechanical and Physical Properties of Ti-13V-11Cr-3Al
| Specification | AMS-T-9046, Comp. B-1 | MIL-T-9047a | |||
|---|---|---|---|---|---|
| Form | Sheet, strip, and plate | Bar | |||
| Condition | Annealed | Solution treated and aged | Annealed | Solution treated and aged | |
| Thickness or diameter, in. | 0.012- 0.049 | 0.050- 4.000 | <4.000 | <7.000b | ≤4.000b |
| Basis | S | S | S | S | S |
| Mechanical Properties: | |||||
| Ftu, ksi: | |||||
| L | 132 | 125 | 170 | 125 | 170 |
| LT | 132 | 125 | 170 | 125c | 170c |
| ST | 125 | 170 | 125c | 170c | |
| Fty, ksi: | |||||
| L | 126 | 120 | 160 | 120 | 160 |
| LT | 126 | 120 | 160 | 120c | 160c |
| ST | 120 | 160 | 120c | 160c | |
| Fcy, ksi: | |||||
| L | 120 | 162 | |||
| LT | 120 | 162 | |||
| ST | 120 | 162 | |||
| Fsu, ksi | 92 | 105 | |||
| Fbru, ksi: | |||||
| (e/D = 1.5) | 207 | 248 | |||
| (e/D = 2.0) | 270 | 313 | |||
| Fbry, ksi: | |||||
| (e/D = 1.5) | 169 | 217 | |||
| (e/D = 2.0) | 200 | 247 | |||
| e, percent: | |||||
| L | 8 | 10 | 4d | 10 | 6 |
| LT | 8 | 10 | 4d | 10c | 2c |
| ST | 10 | 4d | 10c | 2c | |
| RA, percent: | |||||
| L | 25 | 10 | |||
| LT | 25c | 5c | |||
| ST | 25c | 5c | |||
| E, 103 ksi | 14.5 | 15.5 | 14.5 | 15.5 | |
| E, 103 ksi | |||||
| G, 103 ksi. | |||||
| μ | |||||
| Physical Properties: | |||||
| ρ, lb/in.3 | 0.174 | ||||
| C, K, and α | See Figure 5.5.1.0 | ||||
| a | Inactive for new design |
| b | Maximum of 16 square-inch cross-sectional area. |
| c | Applicable, providing LT or ST dimension is ≥3.000 inches |
| d | Thickness 0.025 inch and above: 3 percent below 0.025 inch. |