17-7PH Stainless Steel
| Specification | Form |
|---|---|
| AMS 5528 | Plate, sheet, and strip |
MIL-HDBK-5J
31 January 2003
2.6.10.0 (b). Design Mechanical and Physical Properties of 17-7PH Stainless Steel Sheet and Plate
| Specification | AMS 5528 | |||
|---|---|---|---|---|
| Form | Sheet | Plate | ||
| Condition | TH1050 | |||
| Thickness, in. | 0.015-0.187 | 0.188-0.500 | 0.501-1.000 | |
| Basis | A | B | S | S |
| Mechanical Properties:ª | ||||
| Ftu, ksi: | ||||
| L | 177 | 183 | ||
| LT | 177 | 184 | 180 | 180 |
| Fty, ksi: | ||||
| L | 150b | 167 | ||
| LT | 150c | 167 | 150 | 150 |
| Fcy, ksi: | ||||
| L | 160 | 179 | 160 | |
| LT | 166 | 185 | 166 | |
| Fsu, ksi | 112 | 117 | 114 | |
| Fbru, ksi: | ||||
| (e/D = 1.5) | 305 | 317 | 310 | |
| (e/D = 2.0) | 351 | 365 | 357 | |
| Fbry, ksi: | ||||
| (e/D = 1.5) | 228 | 254 | 228 | |
| (e/D = 2.0) | 240 | 267 | 240 | |
| e, percent (S-basis): | ||||
| LT | d | 6 | 6 | |
| E, 10³ ksi | 29.0 | |||
| Eᶜ, 10³ ksi | 30.0 | |||
| G, 10³ ksi | 11.5 | |||
| μ | 0.28 | |||
| Physical Properties: | ||||
| ω, lb/in.³ | 0.276 | |||
| C, K, and α | See Figure 2.6.10.0 | |||
a Design allowables were based upon data from samples of material, supplied in the solution treated condition, which were austenite conditioned and aged to demonstrate response to heat treatment by suppliers. Properties obtained by the user may be different if the material has been formed or otherwise cold worked.
- b The rounded T99 value of 158 ksi was reduced to agree with transverse specification value.
- c S-Basis. The rounded T99 value equals 159 ksi.
- d See Table 2.6.10.0(c).