Table 5.1.1-1: General

MIL-HDBK-5J, Metallic Materials and Elements for Aerospace Vehicle Structures

Last Updated 29 Oct 2026

Hover any section to copy its link or text, ask Copilot about it, or bookmark it.

12 tables appear under this heading.

1. PDF page 893

Section	Alloy Designation
5.2	Unalloyed Titanium
5.2.1	Commercially Pure Titanium
5.3	Alpha and Near-Alpha Titanium Alloys
5.3.1	Ti-5A1-2.5Sn (Alpha)
5.3.2	Ti-8A1-1Mo-1V (Near-Alpha)
5.3.3	Ti-6A1-2Sn-4Zr-2Mo (Near-Alpha)
5.4	Alpha-Beta Titanium Alloys
5.4.1	Ti-6A1-4V
5.4.2	Ti-6A1-6V-2Sn
5.4.3	Ti - 4.5Al-3V-2Fe-2Mo
5.5	Beta, Near-Beta, and Metastable Titanium Alloys
5.5.1	Ti-13V-11Cr-3A1
5.5.2	Ti-15V-3Cr-3Sn-3A1
5.5.3	Ti-10V-2Fe-3A1

2. PDF page 937

Specification	AMS 4919								AMS-T-9046, Comp. AB-4
Form	Sheet
Condition	Duplex annealed								Triplex annealed
Thickness or diameter, in.	≤0.046		0.047-0.093		0.094-0.140		0.141-0.187		≤0.187
Basis	A	B	A	B	A	B	A	B	Sa
Mechanical Properties:
F_tu, ksi:
L	135^b	143	135^b	143	135^b	143	135^b	143	145
LT	135^b	143	135^b	143	135^b	143	135^b	143	145
F_y, ksi:
L	125^c	136	125^c	136	125^c	136	125^c	136	135
LT	125^c	134	125^c	134	125^c	134	125^c	134	135
F_cy, ksi:
L	132	142	132	142	132	142	132	142
LT	132	142	132	142	132	142	132	142
F_su, ksi
F_bru, ksi:
(e/D=1.5)	195	206	205	217	214	227	219	232
(e/D=2.0)	217	230	243	258	266	282	279	295
F_bry, ksi:
(e/D=1.5)	171	183	171	183	171	183	171	183
(e/D=2.0)	202	217	202	217	202	217	202	217
e, percent (S-basis):
L	8^e		e		10		10		0^e
LT	8^e		e		10		10		0
E, 10³ ksi								16.5
E_c, 10³ ksi								18.0
G, 10³ ksi								6.2
μ								0.32
Physical Properties:
ω, lb/in.³								0.164
C, K and α	See Figure 5.3.3.0

3. PDF page 986

Specification	AMS-T-9046, Comp. AB-3, and AMS 4918
Form	Sheet, strip, and plate
Condition	Annealed							Solution treated and aged
Thickness, in.	<0.1875		0.1875-0.500	0.501-1.000	1.001-1.500	1.501-2.000	2.001-4.000	≤0.1875	0.1875-1.500	1.501-2.500	2.501-4.000
Basis	A	B	S	S	S	S	S	S	S	S	S
Mechanical Properties:
F_tu, ksi:
L	155	160	150	150	150	150	145	170	170	160	150
LT	155	150	150	150	150	150	145	170	170	160	150
F_ty, ksi:
L	145^a	152	140	140	140	140	135	160	160	150	140
LT	145^a	154	140	140	140	140	135	160	160	150	140
F_cy, ksi:
L			139	142	146	148			170
LT			151	147	141	136			170
F_su, ksi:			91	93	95	95			101
F_bru, ksi:
(e/D = 1.5)			236	241	247	250			264
(e/D = 2.0)			294	303	312	317			324
F_bry, ksi:
(e/D = 1.5)			193	196	199	202			237
(e/D = 2.0)			215	223	234	240			266
e, percent (S-basis):
L	10^b		10	10	10	10	8	8	8	6	6
LT	8^b		8	8	8	8	6	6	8
E, 10³ ksi							16.0
E_c, 10³ ksi									16.4
G, 10³ ksi										6.2
μ											0.31
Physical Properties:
ω, lb/in.³											0.164
C, K, and α											See Figure 5.4.2.0

4. PDF page 1002

Specification	Form
AMS 4899	Sheet, Strip, and Plate
AMS 4964	Bars, Wire, Forgings, and Rings

5. PDF page 1105

Makeup of Data Collection:
Heat Treatment: 2 [See Table 6.3.5.1.7(f)]
Number of Vendors = Unknown
Number of Lots = 7
Number of Test Laboratories = 2
Number of Tests = 162
Specimen Details:
Type - Unnotched round bar
Gage Length - N.A.
Gage Thickness - 0.250 inch - 0.375 inch

6. PDF page 1106

5	6
-5.748E-02	-1.606E+00
3.517E-05	9.843E-04
2.032E-01	1.634E+00
-1.220E-01	-4.892E-01
1.697E-02	3.801E-02
3.801E-02	1.471E+00
2.248E-02	1.303E+00
-1.245E-02	9.401E-01
-2.618E-02	9.124E-01

7. PDF page 1107

Product Form: Sheet, 0.066 inch and 0.109 inch
Properties:	TUS, ksi	TYS, ksi	Temp., °F
	197.0	164.0	RT
	208.7	184.2	RT
Specimen Details: Unnotched
	0.30	inch net width
	0.50	inch net width
Heat Treatment: See AMS 5596
Surface Condition: #400 grit belt polished
References: 6.2.1.1.8 and 6.3.5.1.8(a)

8. PDF page 1108

Properties:	TUS, ksi	TYS, ksi	Temp., °F
	197.0	164.0	RT
	208.7	184.2	RT

9. PDF page 1108

Specimen Details:	Notched 60° V-Groove
	K_t = 3.0
	0.300 inch net width
	0.220 inch root width
	0.625 inch net width
	0.030 inch root radius

10. PDF page 1110

Properties:	TUS, ksi	TYS, ksi	Temp., °F
	165.0	141.8	1000
			Unnotched

11. PDF page 1112

Properties:	TUS, ksi	TYS, ksi	Temp., °F
	204.4	177.7	RT
	200.0	166.7	RT

12. PDF page 1112

Specimen Details:	Unnotched
	0.250 inch diameter
	0.200 inch diameter
Heat Treatment:	See AMS 5662 and AMS 5596
Surface Condition:	Unspecified, RMS 8-11
References:	6.3.3.1.8(a) and 6.3.5.1.8(b)

Found in

GENERAL