-
Adan, S.M. and Gibb, W. (2009), “Experimental Evaluation of Kaiser Bolted Bracket Steel Moment Resisting Connections,” Engineering Journal, AISC, Vol. 46, No. 3, pp. 181–195.
-
Grigorian, C.E., Yang, T.S., and Popov, E.P. (1992), “Slotted Bolted Connection Energy Dissipators,” EERC Report No. 92/10, Earthquake Engineering Research Center, University of California, Berkeley, Calif.
-
Gross, J.L., Engelhardt, M.D., Uang, C.M., Kasai, K., and Iwankiw, N.R. (1999), Modification of Existing Welded Steel Moment Frame Connections for Seismic Resistance, Design Guide 12, AISC, Chicago, Ill.
-
Kasai, K. and Bleiman, D. (1996), “Bolted Brackets for Repair of Damaged Steel Moment Frame Connections,” 7th US–Japan Workshop on the Improvement of Structural Design and Construction Practices: Lessons Learned from Northridge and Kobe, Kobe, Japan.
-
Kulak, G.L., Fisher, J.W., and Struik, J.H.A. (1987), Guide to Design Criteria for Bolted and Riveted Joints, 2nd Ed., Wiley, New York, N.Y.
-
Masuda, H., Tamaka, A., Hirabayashi, K., and Genda, I. (1998), “Experimental Study on the Effect of Partial Loss of Sectional Area on the Static Characteristics of H-Beams,” Journal of Structural and Construction Engineering (Transaction of AIJ), Architectural Institute of Japan, No. 512, pp. 157–164, October (in Japanese).
-
Newell, J. and Uang, C.M. (2006), "Cyclic Testing of Steel Moment Connections for the CALTRANS District 4 Office Building Seismic Rehabilitation," UCSD Report No. SSRP-05/03, University of California, San Diego, Calif.
-
Ricles, J.M., Zhang, X., Lu, L.W., and Fisher, J. (2004), “Development of Seismic Guidelines for Deep Column Steel Moment Connections,” ATLSS Report No. 04-13, Lehigh University, Bethlehem, Pa.
-
Seek, M.W. and Murray, T.M. (2008), "Seismic Strength of Moment End-Plate Connections with Attached Concrete Slab," Proceedings, Connections VI, AISC, Chicago, Ill., June 23–25.
-
Tide, R.H.R. (2010), “Bolt Shear Design Considerations,” Engineering Journal, AISC, Vol. 47, No. 1, pp. 47–63.
Loading…