Abel, M.S. and Murray, T.M. (1992a), “Multiple Row, Extended Unstiffened End-Plate Connection Tests,” Research Report CE/VPI-ST-92/04, Department of Civil Engineering, Virginia Polytechnic Institute and State University, Blacksburg, Va.
-
Abel, M.S. and Murray, T.M. (1992b), “Analytical and Experimental Investigation of the Extended Unstiffened Moment End-Plate Connection with Four Bolts at the Beam Tension Flange,” Research Report CE/VPI-ST-93/08, Department of Civil Engineering, Virginia Polytechnic Institute and State University, Blacksburg, Va.
-
Adey, B.T., Grondin, G.Y., and Cheng, J.J.R. (1997), “Extended End Plate Moment Connections under Cyclic Loading,” Structural Engineering Report No. 216, Department of Civil and Environmental Engineering, University of Alberta, Edmonton, Alberta, Canada.
-
Adey, B.T., Grondin, G.Y., and Cheng, J.J.R. (1998), “Extended End Plate Moment Connections under Cyclic Loading,” Journal of Constructional Steel Research, Elsevier Science Publishers, Vol. 46, pp. 1–3.
-
Adey, B.T., Grondin, G.Y., and Cheng, J.J.R. (2000), “Cyclic Loading of End Plate Moment Connections,” Canadian Journal of Civil Engineering, National Research Council of Canada, Vol. 27, No. 4, pp. 683–701.
-
Agerskov, H. (1976), "High Strength Bolted Connections Subject to Prying," Journal of the Structural Division, ASCE, Vol. 102, No. ST1, pp. 161–175.
-
Agerskov, H. (1977), "Analysis of Bolted Connections Subject to Prying," Journal of the Structural Division, ASCE, Vol. 103, No. ST11, pp. 2,145–2,163.
-
Ahuja, V. (1982), "Analysis of Stiffened End-Plate Connections Using Finite Element Method," M.S. Thesis, School of Civil Engineering and Environmental Science, University of Oklahoma, Norman, Okla.
-
Bahaari, M.R. and Sherbourne, A.N. (1993), "Modeling of Extended End-Plate Bolted Con- nections." Proceedings of the National Steel Structures Congress, pp. 731–736, American Institute of Steel Construction, Chicago, Ill.
-
Bjorhovde, R., Brozzetti, J., and Colson, A. (1987), “Classification of Connections,” Connections in Steel Structures—Behaviour, Strength and Design, Elsevier Science Publishers, London, U.K., pp. 388–391.
-
Bjorhovde, R., Colson, A., and Brozzetti, J. (1990), "Classification System for Beam-to-Column Connections," Journal of Structural Engineering, ASCE, Vol. 116, No. 11, pp. 3,059–3,076.
-
Borgsmiller, J.T. and Murray, T.M. (1995), "Simplified Method for the Design of Moment End-Plate Connections," Research Report CE/VPI-ST-95/19, Department of Civil Engineering, Virginia Polytechnic Institute and State University, Blacksburg, Va.
-
Bursi, O.S. and Leonelli, L. (1994), "A Finite Element Model for the Rotational Behavior of End Plate Steel Connections," SSRC Proceedings 1994 Annual Task Group Technical Session, pp. 162–175, Lehigh University, Bethlehem, Pa.
-
Carter, C.J. (1999), Stiffening of Wide-Flange Columns at Moment Connections: Wind and Seismic Applications, Design Guide 13, AISC, Chicago, Ill.
-
Castellani, A., Castiglioni, C.A., Chesi, C., and Plumier, A. (1998), “A European Research Program on the Cyclic Behaviour of Welded Beam to Column Connections,” Proceedings of the NEHRP Conference and Workshop on Research on the Northridge, California Earthquake of January 17, 1994, Vol. III-B, pp. 510–517, National Earthquake Hazards Reduction Program, Washington, D.C.
-
Coons, R.G. (1999), "Seismic Design and Database of End Plate and T-Stub Connections," M.S. Thesis, University of Washington, Seattle, Wash.
-
Disque, R.O. (1962), "End-Plate Connections," National Engineering Conference Proceedings, AISC, pp. 30–37.
-
Douty, R.T. and McGuire, S. (1965), “High Strength Bolted Moment Connections,” Journal of the Structural Division, ASCE, Vol. 91, No. ST2, pp. 101–126.
-
Fleischman, R.B., Chasten, C.P., Lu, L.-W., and Driscoll, G.C. (1991), “Top-and-Seat Angle Connections and End-Plate Connections: Snug vs. Fully Pretensioned Bolts,” Engineering Journal, AISC, Vol. 28, No. 1, pp. 18–28.
-
Ghassemieh, M. (1983), "Inelastic Finite Element Analysis of Stiffened End-Plate Moment Connections," M.S. Thesis, School of Civil Engineering and Environmental Science, University of Oklahoma, Norman, Okla.
-
Ghobarah, A., Korol, R.M., and Osman, A. (1992), “Cyclic Behavior of Extended End-Plate Joints,” Journal of Structural Engineering, ASCE, Vol. 118, No. 5, pp. 1,333–1,353.
-
Ghobarah, A., Osman, A., and Korol, R.M. (1990), "Behaviour of Extended End-Plate Con- nections under Cyclic Loading," Engineering Structures, Elsevier Science Publishers, Vol. 12, pp. 15–26.
-
Granstrom, A. (1980), "Bolted End-Plate Connections," SBI Report 86.3, Stalbyggnads Institute, pp. 5–12.
-
Griffiths, J.D. (1984), “End-Plate Moment Connections—Their Use and Misuse,” Engineering Journal, AISC, Vol. 21, No. 1, pp. 32–34.
-
Hasan, R., Kishi, N., and Chen, W.F. (1997), “Evaluation of Rigidity of Extended End-Plate Connections,” Journal of Structural Engineering, ASCE, Vol. 123, No. 12, pp. 1,595–1,602.
-
Hendrick, D., Kukreti, A., and Murray, T. (1984), “Analytical and Experimental Investigation of Stiffened Flush End-Plate Connections with Four Bolts at the Tension Flange,” Research Report FSEL/MBMA 84-02, Fears Structural Engineering Laboratory, University of Oklahoma, Norman, Okla.
-
Hendrick, D., Kukreti, A., and Murray, T. (1985), "Unification of Flush End-Plate Design Procedures," Research Report FSEL/MBMA 85-01, Fears Structural Engineering Laboratory, University of Oklahoma, Norman, Okla.
-
Johnstone, N.D. and Walpole, W.R. (1981), “Bolted End-Plate Beam-to-Column Connections under Earthquake Type Loading,” Report 81-7, Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand.
Kato, B. and McGuire, W.F. (1973), "Analysis of T-Stub Flange-to-Column Connections," Journal of the Structural Division, ASCE, Vol. 99, No. ST5, pp. 865–888.
-
Kennedy, N.A., Vinnakota, S., and Sherbourne, A.N. (1981), "The Split-Tee Analogy in Bolted Splices and Beam-Column Connections," Proceedings of the International Conference on Joints in Structural Steelwork, pp. 2.138–2.157.
-
Kline, D., Rojiani, K., and Murray, T. (1989), "Performance of Snug Tight Bolts in Moment End-Plate Connections," MBMA Research Report, Department of Civil Engineering, Virginia Polytechnic Institute and State University, Blacksburg, Va. Revised July 1995.
-
Korol, R.M., Ghobarah, A., and Osman, A. (1990), “Extended End-Plate Connections under Cyclic Loading: Behaviour and Design,” Journal of Constructional Steel Research, Elsevier Science Publishers, Vol. 16, No. 4, pp. 253–279.
-
Krishnamurthy, N. (1978), “A Fresh Look at Bolted End-Plate Behavior and Design,” Engineering Journal, AISC, Vol. 15, No. 2, pp. 39–49.
-
Krishnamurthy, N. and Graddy, D. (1976), "Correlation between 2- and 3-Dimensional Finite Element Analysis of Steel Bolted End Plate Connections," Computers and Structures, Vol. 6, No. 4/5, pp. 381–389.
-
Kukreti, A.R., Ghassemieh, M., and Murray, T.M. (1990), “Behavior and Design of Large-Capacity Moment End-Plates,” Journal of Structural Engineering, ASCE, Vol. 116, No. 3, pp. 809–828.
-
Kukreti, A.R., Murray, T.M., and Abolmaali, A. (1987), “End-Plate Connection Moment-Rotation Relationship,” Journal of Constructional Steel Research, Elsevier Science Publishers, Vol. 8, pp. 137–157.
-
Mann, A.P. and Morris, L.J. (1979), “Limit Design of Extended End-Plate Connections,” Journal of the Structural Division, ASCE, Vol. 105, No. ST3, pp. 511–526.
-
Meng, R.L. (1996), “Design of Moment End-Plate Connections for Seismic Loading,” Doctoral Dissertation, Virginia Polytechnic Institute and State University, Blacksburg, Va.
-
Meng, R.L. and Murray, T.M. (1997), "Seismic Performance of Bolted End-Plate Moment Connections," Proceedings of the 1997 National Steel Construction Conference, AISC, pp. 30-1 to 30-14.
-
Morrison, S.J., Astaneh-Asl, A., and Murray, T. (1985), “Analytical and Experimental Investigation of the Extended Stiffened Moment End-Plate Connection with Four Bolts at the Beam Tension Flange,” Research Report FSEL/MBMA 85-05, Fears Structural Engineering Laboratory, University of Oklahoma, Norman, Okla.
-
Morrison, S.J., Astaneh-Asl, A., and Murray, T. (1986), “Analytical and Experimental Investigation of the Multiple Row Extended 1/3 Moment End-Plate Connection with Eight Bolts at the Beam Tension Flange,” Research Report FSEL/MBMA 86-01, Fears Structural Engineering Laboratory, University of Oklahoma, Norman, Okla.
-
Murray, T.M. (1986), “Stability of Gable Frame Panel Zone Plates,” Proceedings of the Structural Stability Research Council Annual Technical Session, pp. 317–325, Structural Stability Research Council, Bethlehem, Pa.
-
Murray, T.M. (1988), “Recent Developments for the Design of Moment End-Plate Connections,” Journal of Constructional Steel Research, Vol. 10, pp. 133–162.
-
Murray, T.M. (1990), Extended End-Plate Moment Connections, Design Guide No. 4, American Institute of Steel Construction, Chicago, Ill.
-
Murray, T.M., Kline, D.P., and Rojiani, K.B. (1992), “Use of Snug-Tightened Bolts in End-Plate Connections,” Connections in Steel Structures II: Behavior, Strength and Design, Edited by R. Bjorhovde et al., AISC, Chicago, Ill., pp. 27–34.
-
Murray, T.M. and Kukreti, A.R. (1988), "Design of 8-Bolt Stiffened Moment End Plates," Engineering Journal, AISC, Vol. 25, No. 2, pp. 45–52.
-
Murray, T.M. and Shoemaker, W.L. (2002), Flush and Extended Multiple Row Moment End Plate Connections, Design Guide 16, AISC, Chicago, Ill.
-
Murray, T.M. and Sumner, E.A. (2003), Extended End-Plate Moment Connections: Seismic and Wind Applications, Design Guide 4, 2nd Ed., AISC, Chicago, Ill.
-
Nair, R., Birkemoe, P., and Munse, W. (1974), “High Strength Bolts Subject to Tension and Prying.” Journal of the Structural Division, ASCE, Vol. 100, No. ST2, pp. 351–372.
-
Packer, J. and Morris, L. (1977), “A Limit State Design Method for the Tension Region of Bolted Beam-Column Connections,” The Structural Engineer, Vol. 55, No. 10, pp. 446–458.
-
Popov, E. and Tsai, K.C. (1989), “Performance of Large Seismic Steel Moment Connections under Cyclic Loads,” Engineering Journal, AISC, Vol. 12, No. 2, pp. 51–60.
-
Ryan, J.C. and Murray, T.M. (1999), “Evaluation of the Inelastic Rotation Capability of Extended End-Plate Moment Connections,” Research Report No. CE/VPI-ST-99/13, submitted to Metal Building Manufacturers Association and American Institute of Steel Construction, Virginia Polytechnic Institute and State University, Blacksburg, Va.
-
Salmon, C. and Johnson, J. (1980), Steel Structures, Design and Behavior, 2nd Ed., Harper & Row, New York, N.Y.
-
Seek, M.W. and Murray, T.M. (2008), "Seismic Strength of Moment End-Plate Connections with Attached Concrete Slab," Proceedings, Connections VI, AISC, Chicago, Ill., June 23–25.
-
Srouji, R., Kukreti, A.R., and Murray, T.M. (1983a), "Strength of Two Tension Bolt Flush End-Plate Connections," Research Report FSEL/MBMA 83-03, Fears Structural Engineering Laboratory, University of Oklahoma, Norman, Okla.
-
Srouji, R., Kukreti, A.R., and Murray, T.M. (1983b), "Yield-Line Analysis of End-Plate Connections with Bolt Force Predictions," Research Report FSEL/MBMA 83-05, Fears Structural Engineering Laboratory, University of Oklahoma, Norman, Okla.
-
Sumner, E.A., Mays, T.W., and Murray, T.M. (2000a), "Cyclic Testing of Bolted Moment End-Plate Connections," Research Report No. CE/VPI-ST-00/03, SAC Report No. SAC/ BD00/21, submitted to the SAC Joint Venture, Virginia Polytechnic Institute and State University, Blacksburg, Va.
-
Sumner, E.A., Mays, T.W., and Murray, T.M. (2000b), “End-Plate Moment Connections: Test Results and Finite Element Method Validation,” Connections in Steel Structures IV, Proceedings of the Fourth International Workshop, AISC, Chicago, Ill., pp. 82–93.
-
Sumner, E.A. and Murray, T.M. (2001), "Experimental Investigation of the MRE 1/2 End-Plate Moment Connection," Research Report No. CE/VPI-ST-01/14, Department of Civil Engineering, Virginia Polytechnic Institute and State University, Blacksburg, Va.
-
Sumner, E.A. and Murray, T.M. (2002), "Behavior of Extended End-Plate Moment Connections Subject to Cyclic Loading," Journal of Structural Engineering, ASCE, Vol. 128, No. 4, pp. 501–508.
-
Tsai, K.C. and Popov, E.P. (1990), “Cyclic Behavior of End-Plate Moment Connections,” Journal of Structural Engineering, ASCE, Vol. 116, No. 11, pp. 2,917–2,930.
-
Yang, H., Tagawa, Y.T., and Nishiyama, I. (2003), “Elasto-Plastic Behavior of ‘New Composite Beam System,’” Steel Structures, Vol. 3, pp. 45–52.
-
Young, J. and Murray, T.M. (1996), “Experimental Investigation of Positive Bending Moment Strength of Rigid Knee Connections,” Research Report No. CE/VPI-ST 9617, Department of Civil Engineering, Virginia Polytechnic Institute and State University, Blacksburg, Va.