-
ASCE (2010), Minimum Design Loads for Buildings and Other Structures, ASCE/SEI 7-10, American Society of Civil Engineers, Reston, Va.
-
ASCE (2016), Minimum Design Loads and Associated Criteria for Buildings and Other Structures, ASCE/SEI 7-16, American Society of Civil Engineers, Reston, Va.
-
Bahmani, P., van de Lindt, J.W., Gershfeld, M., Mochizuki, G.L., Pryor, S.E., and Rammer, D. (2016), “Experimental Seismic Behavior of a Full-Scale Four-Story Soft-Story Wood-frame Building with Retrofits I: Building Design, Retrofit Methodology, and Numerical Validation,” Journal of Structural Engineering, ASCE, Vol. 142, No. 4, DOI 10.1061/(ASCE)ST.1943-541X.0001207.
-
Dowswell, B. (2011), “A Yield Line Component Method for Bolted Flange Connections,” Engineering Journal, AISC, Vol. 48, No. 2, pp. 93–116.
-
FEMA (2009), Quantification of Building Seismic Performance Factors, FEMA P-695, Federal Emergency Management Agency, Washington, D.C.
-
Geschwindner, L.F. and Disque, R.O. (2005), “Flexible Moment Connections for Unbraced Frames Subject to Lateral Forces—A Return to Simplicity,” Engineering Journal, AISC, Vol. 42, No. 2, pp. 99–112.
-
NIST (2010), Evaluation of the FEMA P-695 Methodology for Quantification of Building Seismic Performance Factors, NIST GCR 10-917-8, National Institute of Standards and Technology, Gaithersburg, Md.
-
Pryor, S.E., Chi, B., Ding, F., Judd, J.P., and Murray, T.M. (2018), “Going Deep: New Testing, Analysis and Design Provisions for Expanded Use of Yield-Link Structural Fuse Technology in Steel SMF’s,” Proceedings of the SEAOC Annual Convention, Palm Desert, Calif.
-
Pryor, S.E. and Murray, T.M. (2013), “Next Generation Partial Strength Steel Moment Frames for Seismic Resistance,” Research, Development, and Practice in Structural Engineering and Construction, V. Vimonstatit, A. Singh, and S. Yazdani, eds., Proceedings of the First Australia and South-East Asia Structural Engineering and Construction Conference, Perth, Australia, November 28–December 2, pp. 27–32.
-
Rex, C.O. and Goverdhan, A.V. (2000), “Design and Behavior of a Real PR Building,” Connections in Steel Structures IV: Behavior, Strength, and Design, R. Leon and W.S. Easterling, eds., Proceedings of the Fourth Workshop on Connections in Steel Structures, Roanoke, Va., October 22–24, pp. 94–105.
-
van de Lindt, J.W., Bahmani, P., Mochizuki, G.L., Pryor, S.E., Gershfeld, M., Tian, J., Symans, M.D., and Rammer, D. (2016), “Experimental Seismic Behavior of a Full-Scale Four-Story Soft-Story Woodframe Building with Retrofits II: Shake Table Test Results,” Journal of Structural Engineering, ASCE, Vol. 142, No. 4, DOI 10.1061/(ASCE)ST.1943-541X.0001206.
-
van de Lindt, J.W., Pryor, S.E., and Pei, S. (2009), “Shake Table Testing of a Seven-Story Mixed-Use Condominium at Japan’s E-Defense,” Proceedings of the Structural Engineers Association of California Annual Convention, San Diego, Calif., September 23–26.
Loading…