I1.1 Fabrication Documents for Steel Construction
Fabrication documents shall indicate the work to be performed and include items required by the Specification, the AISC Code of Standard Practice for Steel Buildings and Bridges, the applicable building code, the requirements of Sections A4.1 and A4.2, and the following, as applicable:
- (a) Locations of pretensioned bolts
- (b) Locations of Class A, or higher, faying surfaces
- (c) Gusset plates when they are designed to accommodate inelastic rotation
- (d) Weld access hole dimensions, surface profile, and finish requirements
- (e) Nondestructive testing (NDT) where performed by the fabricator
I1.2 Erection Documents for Steel Construction
Erection documents shall indicate the work to be performed and include items required by the Specification, the AISC Code of Standard Practice for Steel Buildings and Bridges, the applicable building code, the requirements of Sections A4.1 and A4.2, and the following, as applicable:
- (a) Locations of pretensioned bolts
- (b) Those joints or groups of joints in which a specific assembly order, welding sequence, welding technique, or other special precautions are required
I1.3 Fabrication and Erection Documents for Composite Construction
Fabrication documents and erection documents for the steel components of composite steel-concrete construction shall satisfy the requirements of Sections I1.1 and
I1.2. The fabrication and erection documents shall also satisfy the requirements of Section A4.3.
User Note: For reinforced concrete and composite steel-concrete construction, the provisions of Guide to Presenting Reinforcing Steel Design Details (ACI PRC-315-18) and ACI Detailing Manual [ACI MNL-66(20)] apply.