The Code of Standard Practice for Steel Buildings and Bridges, ANSI/AISC 303, Section 4.2.1(a) (AISC, 2022a), requires the transfer of information from the contract documents (design documents and project specifications) into accurate and complete approval documents. Therefore, relevant items in the design documents and project specifications that must be followed in fabrication and erection should be placed on the fabrication and erection documents, or in typical notes issued for the project.
I1.3 Fabrication and Erection Documents for Composite Construction
For reinforced concrete and composite steel-concrete construction, it is recommended that the following provisions be satisfied: Guide to Presenting Reinforcing Steel Design Details (ACI 315R) (ACI, 2018), and ACI Detailing Manual (MNL-66) (ACI, 2020), including modifications required by Chapter 18 of the Building Code Requirements for Structural Concrete and Commentary (ACI 318) (ACI, 2019) and Recommendations for Design of Beam-Column Connections in Monolithic Reinforced Concrete Structures (ACI 352) (ACI, 2002).