1.8 global acceptance criteria · AISC 341-22

REFERENCES

ACI (2002), "Recommendations for Design of Beam-Column Connections in Monolithic Reinforced Concrete Structures," ACI 352R-02, American Concrete Institute, Farmington Hills, Mich.

ACI (2006), Code Requirements for Nuclear Safety-Related Concrete Structures & Commentary, ACI 349-06, American Concrete Institute, Farmington Hills, Mich.

ACI (2008), “Guide for Concrete Construction Quality Systems in Conformance with ISO 9001,” ACI 121R-08, American Concrete Institute, Farmington Hills, Mich.

ACI (2018), “Guide to Presenting Reinforcing Steel Design Details,” ACI 315R-18, American Concrete Institute, Farmington Hills, Mich.

ACI (2019), Building Code Requirements for Structural Concrete, ACI 318-19 and ACI 318M-19, American Concrete Institute, Farmington Hills, Mich.

ACI (2020), ACI Detailing Manual, MNL-66(20), American Concrete Institute, Farmington Hills, Mich.

Agrawal, S., Broberg, M., and Varma, A.H. (2020), “Seismic Design Coefficients for Speed-Core or Composite Plate Shear Walls—Concrete Filled (C-PSW/CF),” Bowen Laboratory Research Report, Purdue University, West Lafayette, Ind.

AISC (1997a), "K-Area Advisory Statement," Modern Steel Construction, February, American Institute of Steel Construction, Chicago, Ill.

AISC (1997b), Seismic Provisions for Structural Steel Buildings, American Institute of Steel Construction, Chicago, Ill., April 15.

AISC (2002), Seismic Provisions for Structural Steel Buildings, American Institute of Steel Construction, Chicago, Ill., May 21.

AISC (2005), Seismic Provisions for Structural Steel Buildings, ANSI/AISC 341-05, American Institute of Steel Construction, Chicago, Ill., March 9.

AISC (2006), Seismic Design Manual, 1st Ed., American Institute of Steel Construction, Chicago, Ill.

AISC (2010a), Base Plate and Anchor Rod Design, Design Guide 1, 2nd Ed., American Institute of Steel Construction, Chicago, Ill.

AISC (2010b), Seismic Provisions for Structural Steel Buildings, ANSI/AISC 341-10, American Institute of Steel Construction, Chicago, Ill., June 22.

AISC (2016), Seismic Provisions for Structural Steel Buildings, ANSI/AISC 341-16, American Institute of Steel Construction, Chicago, Ill., July 12.

AISC (2017), Steel Construction Manual, 15th Ed., American Institute of Steel Construction, Chicago, Ill.

AISC (2018), Seismic Design Manual, 3rd Ed., American Institute of Steel Construction, Chicago, Ill.

AISC (2020), “Task Group Report: Local Buckling (Width-to-Thickness) Limits,” Ad Hoc Task Group on Local Buckling Limits, Committee on Specifications, American Institute of Steel Construction, Chicago, Ill.

AISC (2022a), Code of Standard Practice for Steel Buildings and Bridges, ANSI/AISC 303-22, American Institute of Steel Construction, Chicago, Ill.

AISC (2022b), Prequalified Connections for Special and Intermediate Steel Moment Frames for Seismic Applications, ANSI/AISC 358-22, American Institute of Steel Construction, Chicago, Ill.

AISC (2022c), Seismic Provisions for the Evaluation and Retrofit of Existing Structural Steel Buildings, ANSI/AISC 342-22, American Institute of Steel Construction, Chicago, Ill.

AISC (2022d), Specification for Structural Steel Buildings, ANSI/AISC 360-22, American Institute of Steel Construction, Chicago, Ill.

AISI (2016), North American Specification for the Design of Cold-Formed Steel Structural Members, American Iron and Steel Institute, Washington, D.C.

AISI (2020), North American Standard for the Design of Profiled Steel Diaphragm Panels, AISI S310-20, American Iron and Steel Institute, Washington, D.C.

Alzeni, Y. and Bruneau, M. (2014), “Cyclic Inelastic Behavior of Concrete Filled Sandwich Panel Walls Subjected to In-Plane Flexure,” Technical Report MCEER-14-0009, MCEER, University at Buffalo, Buffalo, N.Y.

Alzeni, Y. and Bruneau, M. (2017), “In-Plane Cyclic Testing of Concrete-Filled Sandwich Steel Panel Walls with and without Boundary Elements,” Journal of Structural Engineering, American Society of Civil Engineers, Vol. 143, No. 9, pp. 04017115-1-04017115-12.

Ammerman, D.J. and Leon, R.T. (1990), “Unbraced Frames with Semi-Rigid Composite Connections,” Engineering Journal, AISC, Vol. 27, No. 1, pp. 12–21.

Arce, G. (2002), “Impact of Higher Strength Steels on Local Buckling and Overstrength in EBFs,” Master’s Thesis, Department of Civil Engineering, University of Texas at Austin, Austin, Tex.

ASCE (1991a), Standard for the Structural Design of Composite Slabs, ANSI/ASCE 3-91, American Society of Civil Engineers, Reston, Va.

ASCE (1991b), Standard Practice for Construction and Inspection of Composite Slabs, ANSI/ASCE 9-91, American Society of Civil Engineers, Reston, Va.

ASCE (1994), "Guidelines for Design of Joints between Steel Beams and Reinforced Concrete Columns," Journal of Structural Engineering, American Society of Civil Engineers, Vol. 120, No. 8, pp. 2,330–2,357.

ASCE (1998), "Design Guide for Partially Restrained Composite Connections," Journal of Structural Engineering, American Society of Civil Engineers, Vol. 124, No. 10, pp. 1,099–1,114.

ASCE (2009), Recommendations for Seismic Design of Hybrid Coupled Wall Systems, American Society of Civil Engineers, Reston, Va.

ASCE (2010), Minimum Design Loads for Buildings and Other Structures, ASCE/SEI 7-10, American Society of Civil Engineers, Reston, Va.

ASCE (2017), Seismic Evaluation and Retrofit of Existing Buildings, ASCE/SEI 41-17, American Society of Civil Engineers, Reston, Va.

ASCE (2022), Minimum Design Loads and Associated Criteria for Buildings and Other Structures, ASCE/SEI 7-22, American Society of Civil Engineers, Reston, Va.

Aslani, F. and Goel, S.C. (1991), “Stitch Spacing and Local Buckling in Seismic Resistant Double Angle Bracing Members,” Journal of Structural Engineering, ASCE, Vol. 117, No. 8, pp. 2,442–2,463.

ASNT (2020a), Recommended Practice No. SNT-TC-1A-2020 Personnel Qualification and Certification in Nondestructive Testing, ANSI/ASNT SNT-TC-1A-2020, American Society for Nondestructive Testing, Columbus, Ohio.

ASNT (2020b), Standard for Qualification and Certification of Nondestructive Testing Personnel, ANSI/ASNT CP-189-2020, American Society for Nondestructive Testing, Columbus, Ohio.

Astaneh-Asl, A. (1998), "Seismic Behavior and Design of Gusset Plates for Braced Frames," Steel Tips, Structural Steel Education Council, Moraga, Calif.

Astaneh-Asl, A. (2005a), "Design of Shear Tab Connections for Gravity and Seismic Loads," Steel Tips, Structural Steel Education Council, Moraga, Calif.

Astaneh-Asl, A. (2005b), "Notes on Design of Double-Angle and Tee Shear Connections for Gravity and Seismic Loads," Steel Tips, Structural Steel Education Council, Moraga, Calif.

Astaneh-Asl, A., Bolt, B., McMullin, K., Donikian, R.R., Modjtahedi, D., and Cho, S.-W. (1994), “Seismic Performance of Steel Bridges during the 1994 Northridge Earthquake,” Report No. UCB/CEE-Steel-94/01, Department of Civil and Environmental Engineering, University of California, Berkeley, Calif.

Astaneh-Asl, A., Cochran, M., and Sabelli, R. (2006), Seismic Detailing of Gusset Plates for Special Concentrically Braced Frames, Steel Tips, Structural Steel Educational Council, Moraga , Calif.

Astaneh-Asl, A., Goel, S.C., and Hanson, R.D. (1986), “Earthquake-Resistant Design of Double Angle Bracing,” Engineering Journal, AISC, Vol. 23, No. 4, pp. 133–147.

Astaneh-Asl, A. and Ravat, S. (1997), “Cyclic Tests of Steel H-Piles,” Report No. UCB/ CEE-Steel-97/01, Department of Civil and Environmental Engineering, University of California, Berkeley, Calif.

ASTM (2017a), Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes, ASTM A898/A898M-17, ASTM International, West Conshohocken, Pa.

ASTM (2017b), Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates, ASTM A435/A435M-17, ASTM International, West Conshohocken, Pa.

ASTM (2021), Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection, ASTM E329-21, ASTM International, West Conshohocken, Pa.

ATC (1992), Guidelines for Cyclic Seismic Testing of Components of Steel Structures, ATC-24, Applied Technology Council, Redwood City, Calif.

ATC (2010), Modeling and Acceptance Criteria for Seismic Design and Analysis of Tall Buildings, ATC-72, Applied Technology Council, Redwood City, Calif.

AWS (2009), Structural Welding Code—Seismic Supplement, AWS D1.8/D1.8M: 2009, American Welding Society, Miami, Fla.

AWS (2020), Structural Welding Code—Steel, ANSI/AWS D1.1/D1.1M:2020, American Welding Society, Miami, Fla.

AWS (2021), Structural Welding Code—Seismic Supplement, ANSI/AWS D1.8/D1.8M:2021, American Welding Society, Miami, Fla.

Azizinamini, A. and Schneider, S.P. (2004), “Moment Connections to Concrete-Filled Steel Tubes,” Journal of Structural Engineering, ASCE, Vol. 130, No. 2, pp. 213–222.

Bansal, J.P. (1971), "The Lateral Instability of Continuous Steel Beams," CESRL Dissertation No. 71-1, University of Texas, Austin, Tex.

Barsom, J.M. and Rolfe, S.T. (1987), Fracture and Fatigue Control in Structures: Applications of Fracture Mechanics, 2nd Ed., Prentice Hall, Upper Saddle River, N.J.

Barsom, J.M. and Rolfe, S.T. (1999), Fracture and Fatigue Control in Structures: Applications of Fracture Mechanics, 3rd Ed., ASTM International MNL41, American Society for Testing and Materials, West Conshohocken, Pa.

Bartlett, F.M., Jelinek, J.J., Schmidt, B.J., Dexter, R.J., Graeser, M.D., and Galambos, T.V. (2001), Updating Standard Shape Material Properties Database for Design and Reliability, University of Western Ontario and University of Minnesota.

Basha, H.S. and Goel, S.C. (1994), “Seismic Resistant Truss Moment Frames with Ductile Vierendeel Segment,” Research Report No. UMCEE 94-29, University of Michigan Department of Civil and Environmental Engineering, Ann Arbor, Mich.

Becker, E.R. (1971), Panel Zone Effect on the Strength of Rigid Steel Frames, USCOE 001, University of Southern California, Structural Mechanics Laboratory, Los Angeles, Calif.

Berman, J.W. (2011), “Seismic Behavior of Code Designed Steel Plate Shear Walls,” Engineering Structures, Vol. 33, pp. 230–244.

Berman, J.W. and Bruneau, M. (2003a), “Experimental Investigation of Light-Gauge Steel Plate Shear Walls for the Seismic Retrofit of Buildings,” Technical Report MCEER-03- 001, Multidisciplinary Center for Earthquake Engineering Research, Buffalo, N.Y.

Berman, J. and Bruneau, M. (2003b), “Plastic Analysis and Design of Steel Plate Shear Walls,” Journal of Structural Engineering, ASCE, Vol. 129, No. 11, pp. 1,448–1,456.

Berman, J.W. and Bruneau, M. (2004), “Steel Plate Shear Walls Are Not Plate Girders,” Engineering Journal, AISC, Vol. 41, No. 3, pp. 95–106.

Berman, J.W. and Bruneau, M. (2005a), "Approaches for the Seismic Retrofit of Braced Steel Bridge Piers and Proof-of-Concept Testing of a Laterally Stable Eccentrically Braced Frame," Technical Report MCEER-05-0004, Multidisciplinary Center for Earthquake Engineering Research, Buffalo, N.Y.

Berman, J. and Bruneau, M. (2005b), “Experimental Investigation of Light-Gauge Steel Plate Shear Walls,” Journal of Structural Engineering, ASCE, Vol. 131, No. 2, pp. 259–267.

Berman, J. and Bruneau, M. (2006), “Further Development of Tubular Eccentrically Braced Frame Links for the Seismic Retrofit of Braced Steel Truss Bridge Piers,” Technical Report MCEER-06-0006, Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, N.Y.

Berman, J. and Bruneau, M. (2007), “Experimental and Analytical Investigation of Tubular Links for Eccentrically Braced Frames,” Engineering Structures, Vol. 29, No. 8, pp. 1,929–1,938.

Berman, J. and Bruneau, M. (2008a), “Capacity Design of Vertical Boundary Elements in Steel Plate Shear Walls,” Engineering Journal, AISC, Vol. 45, No.1, pp. 57–71.

Berman, J. and Bruneau, M. (2008b), “Tubular Links for Eccentrically Braced Frames, I: Finite Element Parametric Study,” Journal of Structural Engineering, ASCE, Vol. 134, No. 5, pp. 692–701.

Berman, J. and Bruneau, M. (2008c), "Tubular Links for Eccentrically Braced Frames, II: Experimental Verification," Journal of Structural Engineering, ASCE, Vol. 134, No. 5, pp. 702–712.

Bhardwaj, R.B., Wang, A.Y., and Varma, A.H. (2018), “Slenderness Requirements for CF-CPSW: The Effects of Concrete Casting.” Proceedings of the Eighth International Conference on Thin-Walled Structures—ICTWS 2018, Lisbon, Portugal.

Bhowmick, A.K., Driver, R.G., and Grondin, G.Y. (2009), “Seismic Analysis of Steel Plate Shear Walls Considering Strain Rate and P-Delta Effects,” Journal of Constructional Steel Research, Elsevier, Vol. 65, No. 5, pp. 1,149–1,159.

Bjorhovde, R. (1984), “Effects of End Restraint on Column Strength—Practical Applications,” Engineering Journal, AISC, Vol. 21, No. 1, pp. 1–13.

Bjorhovde, R., Colson, A., and Brozzetti, J. (1990), "Classification System for Beam-to-Column Connections," Journal of Structural Engineering, ASCE, Vol. 116, No. 11, pp. 3,059–3,076.

Black, R.C., Wenger, W.A., and Popov, E.P. (1980), "Inelastic Buckling of Steel Struts Under Cyclic Load Reversals," Report No. UCB/EERC-80-40, Earthquake Engineering Research Center, Berkeley, Calif.

Bleich, F. (1952), "Buckling Strength of Metal Structures," Engineering Societies Monographs, McGraw-Hill, New York, N.Y.

Blodgett, O.W. (2001), “Notes on Beam to Column Connections,” Steel Moment Frame Connection Advisory No. 3, SAC 95-01, SAC Joint Venture, Sacramento, Calif.

Bondy, K.P. (1996), “A More Rational Approach to Capacity Design of Seismic Moment Frame Columns,” Earthquake Spectra, EERI, Vol. 12, No. 3, August, Oakland, Calif.

Booth, P.N., Bhardwaj, S.R., Tseng, T.-C., Seo, J., and Varma, A.H. (2020), “Ultimate Shear Strength of Steel-Plate Composite (SC) Walls with Boundary Elements,” Journal of Constructional Steel Research, Elsevier, Vol. 165, pp. 105816-1–105816-15.

Borello, D.J. and Fahnestock, L.A. (2013), “Seismic Design and Analysis of Steel Plate Shear Walls with Coupling,” Journal of Structural Engineering, ASCE, Vol. 139, No. 8, pp. 1,263–1,273.

Broberg, M., Shafaei, S., Kizilarslan, E., Seo, J., Varma, A.H., Bruneau, M., and Klemencic, R. (2022), “Capacity Design of Coupled Composite Plate Shear Walls/Concrete Filled (CC-PSW/CF),” Journal of Structural Engineering, ASCE, Vol. 148, No. 4, pp. 04022022-1–04022022-18.

Bruneau, M. and Bhagwagar, T. (2002), “Seismic Retrofit of Flexible Steel Frames Using Thin Infill Panels,” Engineering Journal, AISC, Vol. 24, No. 4, pp. 443–453.

Bruneau, M., Mahin, S.A., and Popov, E.P. (1987), "Ultimate Behavior of Butt Welded Splices in Heavy Rolled Steel Sections," Report No. UCB/EERC-87/10, Earthquake Engineering Research Center, Berkeley, Calif.

Bruneau, M., Uang., C.-M., and Sabelli, R. (2011), Ductile Design of Steel Structures, 2nd Ed., McGraw-Hill, New York, N.Y.

Bruneau, M., Varma, A.H., Kizilarslan, E., Broberg, M., Shafaei, S., and Seo, J. (2019), "R-Factors for Coupled Composite Plate Shear Walls/Concrete Filled (CC-PSW/CF)," Charles Pankow Foundation Report CPF#05-17, McLean, Va.

Caccese, V., Elgaaly, M., and Chen, R. (1993), “Experimental Study of Thin Steel-Plate Shear Walls Under Cyclic Load,” Journal of Structural Engineering, ASCE, Vol. 119, No. 2, pp. 573–587.

Carter, C.J. (1999), Stiffening of Wide-Flange Columns at Moment Connections: Wind and Seismic Applications, Design Guide 13, AISC, Chicago, Ill.

Carter, C.J., Muir, L., and Dowswell, B. (2016), “Establishing and Developing the Weak-Axis Strength of Plates Subjected to Axial Loads,” Engineering Journal, AISC, Vol. 53, No. 3, pp. 147–158.

Cattan, J. (1995), Statistical Analysis of Charpy V-Notch Toughness for Steel Wide-Flange Structural Shapes, AISC, Chicago, Ill.

Chansuk, P., Ozkula, G., Uang, C.-M., and Harris III, J.L. (2021), “Seismic Behavior and Design of Deep, Slender Wide-Flange Structural Steel Beam-Columns,” NIST Technical Note 2169, National Institute of Standards and Technology, Gaithersburg, Md.

Chao, S.-H. and Goel, S. (2008), “A Modified Equation for Expected Maximum Shear Strength of the Special Segment for Design of Special Truss Moment Frames,” Engineering Journal, AISC, Vol. 45, No. 2, pp. 117–125.

Chao, S.-H., Simasathien, S., Jiansinlapadamrong, C., and Okazaki, T. (2015), “Seismic Performance of Full-Scale Steel Special Truss Moment Frame (STMF) with Innovative Detailing and Long Spans,” Proceedings, SEAOC Convention.

Chen, W.F. and Lui, E.M. (1991), Stability Design of Steel Frames, CRC Press, Boca Raton, Fla.

Chen, L., Tremblay, R., and Tirca, L. (2019), “Modular Tied Eccentrically Braced Frames for Improved Seismic Response of Tall Buildings,” Journal of Constructional Steel Research, Elsevier, Vol. 155, pp. 370–384.

Cheng, J.J., Kulak, G.L., and Khoo, H.-A. (1998), “Strength of Slotted Tubular Tension Members,” Canadian Journal of Civil Engineering, Vol. 25, pp. 982–991.

Chi, B. and Uang, C.-M. (2002), “Cyclic Response and Design Recommendations of Reduced Beam Section Moment Connections with Deep Columns,” Journal of Structural Engineering, ASCE, Vol. 128, No. 4, pp. 464–473.

Choi, B.J., Kim, K.Y., Kim, C.H., and Kim, T.Y. (2009), “Experimental Compression Behavior of Stiffened Steel Plate Concrete (SSC) Structures under Compression Loading,” Proceedings of the 20th International Conference on Structural Mechanics in Reactor Technology (SMiRT 20), Espoo, Finland, August 9–14, Division 5, Paper 2008.

Choi, I.R. and Park, H.G. (2009), “Steel Plate Shear Walls with Various Infill Plate Designs,” Journal of Structural Engineering, ASCE, Vol. 135, No. 7, pp. 785–796.

Chou, C.-C. and Uang, C.-M. (2002), “Cyclic Performance of a Type of Steel Beam to Steel-Encased Reinforced Concrete Column Moment Connections,” Journal of Constructional Steel Research, Vol. 58, pp. 637–663.

Civjan, S.A. and Singh, P. (2003), “Behavior of Shear Studs Subjected to Fully Reversed Cyclic Loading,” Journal of Structural Engineering, ASCE, Vol. 129, No. 11, pp. 1,466–1,474.

Clark, P., Aiken, I., Kasai, K., Ko, E., and Kimura, I. (1999), “Design Procedures for Buildings Incorporating Hysteretic Damping Devices,” Proceedings of the 68th Annual Convention, Structural Engineers Association of California, Sacramento, Calif., pp. 355–371.

Clifton, C., Bruneau, M., MacRae, G., Leon, R., and Fussell, A. (2011), “Steel Structures Damage from the Christchurch Earthquake of February 22, 2011, NZST,” Bulletin of the New Zealand Society for Earthquake Engineering, Vol. 44, No. 4, pp. 297–318.

County of Los Angeles Department of Public Works (1996), County of Los Angeles Current Position on Design and Construction of Welded Moment Resisting Frame Systems (WMRF), Los Angeles, Calif.

CSA (2001), Limit States Design of Steel Structures, CSA S16-01, Canadian Standards Association, Mississauga, Ontario.

CSA (2004), Design of Concrete Structures, CSA A23.3-04, Canadian Standards Association, Rexdale, Ontario.

Dastfan, M. and Driver, R.G. (2008), “Flexural Stiffness Limits for Frame Members of Steel Plate Shear Wall Systems,” Proceedings of the Annual Stability Conference, Nashville, SSRG, Rolla, Mo.

Deierlein, G.G. and Noguchi, H. (2004), “Overview of US-Japan Research on the Seismic Design of Composite Reinforced Concrete and Steel Moment Frame Structures,” Journal of Structural Engineering, ASCE, Vol. 130, No. 2, pp. 361–367.

Deierlein, G.G., Sheikh, T.M., and Yura, J.A. (1989), “Part 2: Beam Column Moment Connections for Composite Frames,” Journal of Structural Engineering, ASCE, Vol. 115, No. 11, pp. 2,877–2,896.

Denavit, M.D., Hajjar, J.F., Perea, T., and Leon, R.T. (2018), “Elastic Flexural Rigidity of Steel-Concrete Composite Columns,” Engineering Structures, Vol. 160, pp. 293–303.

Deng, X., Dastfan, M., and Driver, R.G. (2008), “Behavior of Steel Plate Shear Walls with Composite Columns,” Proceedings Structures Congress, ASCE, April 24–26, Vancouver, British Columbia.

Dexter, R. and Melendrez, M. (1999), “Through-Thickness Strength and Ductility of Column Flanges in Moment Connections,” Report No. SAC/BD 99/02, SAC Joint Venture, Sacramento, Calif.

DiCorso, P.J., Reinhorn, A.M., Dickerson, J.R., Radziminski, J.B., and Harper, W.L. (1989), "Response of Frames with Bolted Semi-Rigid Connections, Part I—Experimental Study on Analytical Predictions," Technical Report NCEER-89-0015, National Center for Earthquake Engineering Research, Buffalo, N.Y.

Donkada, S. (2012), “Finite Element Analysis of Doubler Plate Attachment Details and Load Paths in Continuity Plates for Steel Moment Frames,” M.S. Thesis, Department of Civil, Architectural and Environmental Engineering, University of Texas at Austin, Austin, Tex.

Dowden, D. and Bruneau, M. (2014), “Analytical and Experimental Investigation of Self-Centering Steel Plate Shear Walls,” Technical Report MCEER-14-0010, Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, N.Y.

Dowswell, B. (2015), “Plastic Strength of Connection Elements,” Engineering Journal, AISC, Vol. 52, No. 1, pp. 47–65.

Driver, R.G., Kulak, G.L., Kennedy, D.J.L., and Elwi, A.E. (1997), "Seismic Behavior of Steel Plate Shear Walls," Structural Engineering Report No. 215, Department of Civil Engineering, University of Alberta, Edmonton, Alberta.

Dusicka, P. and Itani, A.M. (2002), “Behavior of Built-Up Shear Links Under Large Cyclic Deformations,” Proceedings of the 2002 Annual Meeting of the Structural Stability Research Council, Structural Stability Research Council, Gainesville, Fla.

Dusicka, P., Itani, A.M., and Buckle, I.G. (2007), “Cyclic Response of Plate Steels Under Large Inelastic Strains,” Journal of Constructional Steel Research, Elsevier, Vol. 63, No. 2, pp. 156–164.

Easterling, W.S. and Porter M.L. (1994), “Steel-Deck-Reinforced Concrete Diaphragms I & II,” Journal of Structural Engineering, ASCE, Vol. 120, No. 2, pp. 560–596.

Elkady, A. and Lignos, D.G. (2018), “Full-Scale Testing of Deep Wide-Flange Steel Columns Under Multi-Axis Cyclic Loading: Loading Sequence, Boundary Effects and Out-of-Plane Brace Force Demands,” Journal of Structural Engineering, ASCE, Vol. 144, No. 2, pp. 04017189-1–04017189-15.

Ellingwood, B.R. and Corotis, R.B. (1991), “Load Combinations for Buildings Exposed to Fires,” Engineering Journal, AISC, Vol. 28, No. 1, pp. 37–44.

Elremaily, A.F. (2000), “Connections Between Steel Beams and Concrete-Filled Steel Tube Columns,” Ph.D. Dissertation, University of Nebraska, Lincoln, Neb.

El-Tawil, S. and Deierlein, G.G. (1999), “Strength and Ductility of Encased Composite Columns,” Journal of Structural Engineering, ASCE, Vol. 125, No. 9, pp. 1,009–1,019.

El-Tawil, S., Harries, K.A., Fortney P.J., Shahrooz, B.M., Kurama, Y., Hassen, M., and Tong, S. (2009), "Recommendations for Seismic Design of Hybrid Coupled Wall Systems," ASCE Special Publication, American Society of Civil Engineers, Reston, Va.

El-Tawil, S., Mikesell, T.D., Vidarsson, E., and Kunnath, S.K. (1999), “Inelastic Behavior and Design of Steel Panel Zones,” Journal of Structural Engineering, ASCE, Vol. 125, No. 2, pp. 183–193.

El-Tayem, A. and Goel, S.C. (1986), “Effective Length Factor for the Design of X-Bracing Systems,” Engineering Journal, AISC, Vol. 23, No. 1, pp. 41–45.

Engelhardt, M.D. and Popov, E.P. (1989a), "Behavior of Long Links in Eccentrically Braced Frames," Report No. UCB/EERC-89/01, Earthquake Engineering Research Center, Berkeley, Calif.

Engelhardt, M.D. and Popov, E.P. (1989b), "On Design of Eccentrically Braced Frames," Earthquake Spectra, Vol. 5, No. 3, August, Earthquake Engineering Research Institute, Oakland, Calif., pp. 495-511.

Engelhardt, M.D., Tsai, K.C., and Popov, E.P. (1992), “Stability of Beams in Eccentrically Braced Frames,” Chapter in: Stability and Ductility of Steel Structures Under Cyclic Loading, Y. Fukumoto and G.C. Lee, eds., CRC Press, Boca Raton, Fla., pp. 99–112.

Engelhardt, M.D., Fry, G.T., Jones, S., Venti, M., and Holliday, S. (2000), "Behavior and Design of Radius-Cut Reduced Beam Section Connections," Report No. SAC/BD 00/17, Sac Joint Venture, Sacramento, Calif.

Englekirk, R.E. (1999), “Extant Panel Zone Design Procedures for Steel Frames Are Questioned,” Earthquake Spectra, EERI, Vol. 15, No. 2, May, pp. 361–370.

Fahnestock, L.A., Ricles, J.M., and Sause, R. (2006), "Experimental Study of a Large-Scale Buckling Restrained Using the Pseudo-Dynamic Testing Method," Proceedings of the 8th National Conference on Earthquake Engineering, San Francisco, Calif., April.

Fahnestock, L.A., Sause, R., and Ricles, J.M. (2003), "Analytical and Experimental Studies on Buckling-Restrained Braced Composite Frames," Proceedings of International Workshop on Steel and Concrete Composite Construction (IWSCCC-2003), Report No. NCRE03-026, National Center for Research on Earthquake Engineering, Taipei, Taiwan, pp. 177-188.

Fahnestock, L.A., Sause, R., and Ricles, J.M. (2007), "Seismic Response and Performance of Buckling-Restrained Braced Frames," Journal of Structural Engineering, ASCE, Vol. 133, No. 9, pp. 1,195–1,204.

FEMA (1994), NEHRP (National Earthquake Hazards Reduction Program) Recommended Provisions for Seismic Regulations for New Buildings, Federal Emergency Management Agency, Washington, D.C.

FEMA (2000a), Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings, FEMA 350, Federal Emergency Management Agency, Washington, D.C.

FEMA (2000b), Recommended Specifications and Quality Assurance Guidelines for Steel Moment-Frame Construction for Seismic Applications, FEMA 353, Federal Emergency Management Agency, Washington, D.C.

FEMA (2000c), State of the Art Report on Connection Performance, FEMA 355D, prepared by the SAC Joint Venture for the Federal Emergency Management Agency, Washington, D.C.

FEMA (2000d), State of the Art Report on Performance Prediction and Evaluation of Steel Moment-Frame Buildings, FEMA 355F, prepared by the SAC Joint Venture for the Federal Emergency Management Agency, Washington, D.C.

FEMA (2000e), State of the Art Report on Systems Performance of Steel Moment Frames Subject to Earthquake Ground Shaking, FEMA 355C, prepared by the SAC Joint Venture for the Federal Emergency Management Agency, Washington, D.C.

FEMA (2000f), State of the Art Report on Welding and Inspection, Chapter 6, FEMA 355B, Federal Emergency Management Agency, Washington, D.C.

FEMA (2001), NEHRP Recommended Provisions for Seismic Regulations; Part 2: Commentary, FEMA 369, Federal Emergency Management Agency, Washington, D.C.

FEMA (2003), NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures, FEMA 450, Federal Emergency Management Agency, Washington, D.C.

FEMA (2009a), NEHRP Recommended Seismic Provisions for New Buildings and Other Structures, FEMA P-750, Federal Emergency Management Agency, Washington, D.C.

FEMA (2009b), Quantification of Building Seismic Performance Factors, FEMA P-695, Federal Emergency Management Agency, Washington, D.C.

FEMA (2011), Quantification of Building Seismic Performance Factors: Component Equiva- lency Methodology, FEMA P-795, Federal Emergency Management Agency, Washington, D.C.

FEMA (2015), NEHRP Recommended Seismic Provisions for New Buildings and Other Structures, FEMA P-1050, Federal Emergency Management Agency, Washington, D.C.

FEMA (2020), NEHRP Recommended Seismic Provisions for New Buildings and Other Structures, Volume I: Part 1 Provisions, Part 2 Commentary, FEMA P-2082-1, Federal Emergency Management Agency, Washington, D.C.

Fielding, D.J. and Huang, J.S. (1971), “Shear in Steel Beam-to-Column Connections,” Welding Journal, AWS, Vol. 50, No. 7, pp. 313–326.

Fischer, E. and Varma, A.H. (2015), “Design of Split-Tee Connections for Special Composite Moment Resisting Frames,” Engineering Journal, AISC, Vol. 52, No. 3, pp. 185–201.

Fortney, P.J. (2005), "The Next Generation of Coupling Beams," Department of Civil and Environmental Engineering, Ph.D. dissertation, University of Cincinnati, Cincinnati, Ohio.

Foutch, D.A. (1989), “Seismic Behavior of Eccentrically Braced Steel Building,” Journal of Structural Engineering, ASCE, Vol. 115, No. 8, pp. 1,857–1,876.

Fu, Y. and Bruneau, M. (2019), “Complementary Evaluation of Diagonal Tension Field Inclination Angle in Steel Plate Shear Walls,” Engineering Journal, AISC, Vol. 56, No. 1, pp. 47–61.

Fu, Y., Wang, F., and Bruneau, M. (2017), “Diagonal Tension Field Inclination Angle in Steel Plate Shear Walls,” Journal of Structural Engineering, ASCE, Vol. 143, No. 7, pp. 04017058-1–04017058-14.

Furlong, R.W. (1997), “Composite Columns,” Composite Construction Design for Buildings, Chapter 4, ASCE/McGraw Hill, New York, N.Y.

Galasso, C., Stillmaker, K., Eltit, C., and Kanvinde, A.M. (2015), "Probabilistic Demand and Fragility Assessment of Welded Column Splices in Steel Moment Frames," Earthquake Engineering and Structural Dynamics, John Wiley & Sons, New York, N.Y.

Goel, S.C. (1992a), "Recommendations for US/Japan Cooperative Research Program. Phase 5: Composite and Hybrid Structures," Report UMCEE 92-29, University of Michigan, Department of Civil and Environmental Engineering, Ann Arbor, Mich.

Goel, S.C. (1992b), "Cyclic Post Buckling Behavior of Steel Bracing Members," Stability and Ductility of Steel Structures under Cyclic Loading, pp. 75–104, CRC Press, Boca Raton, Fla.

Goel, S.C. (1992c), "Earthquake Resistant Design of Ductile Braced Steel Structures," Stability and Ductility of Steel Structures under Cyclic Loading, CRC Press, Boca Raton, Fla., pp. 297–308.

Goel, S.C. (1993), "Proceedings of a US/Japan Cooperative Research Program Workshop on Composite and Hybrid Structures," Report UMCEE 93, University of Michigan, Department of Civil and Environmental Engineering, Ann Arbor, Mich.

Goel, S.C. and Chao, S.-H. (2008), Performance-Based Plastic Design: Earthquake Resistant Steel Structures, International Code Council.

Goel, S.C. and Itani, A. (1994a), "Seismic Behavior of Open Web Truss Moment Frames," Journal of Structural Engineering, ASCE, Vol. 120, No. 6, pp. 1,763–1,780.

Goel, S.C. and Itani, A. (1994b), “Seismic Resistant Special Truss Moment Frames,” Journal of Structural Engineering, ASCE, Vol. 120, No. 6, pp. 1,781–1,797.

Goel, S.C. and Lee, S. (1992), “A Fracture Criterion for Concrete-Filled Tubular Bracing Members Under Cyclic Loading,” Proceedings of the 1992 ASCE Structures Congress, ASCE, Reston, Va., pp. 922–925.

Gomez, I., Kanvinde, A., and Deierlein, G. (2010), “Exposed Column Base Connections Subjected to Axial Compression and Flexure,” Final Report Presented to the American Institute of Steel Construction, April.

Gomez, I., Kanvinde, A., Smith, C., and Deierlein, G. (2009), “Shear Transfer in Exposed Column Base Plates,” Report presented to the American Institute of Steel Construction, March.

Gong, B. and Shahrooz, B.M. (2001a), “Concrete-Steel Composite Coupling Beams. Part I: Component Testing,” Journal of Structural Engineering, ASCE, Vol. 127, No. 6, pp. 625–631.

Gong, B. and Shahrooz, B.M. (2001b), "Concrete-Steel Composite Coupling Beams. Part II: Subassembly Testing and Design Verification," Journal of Structural Engineering, ASCE, Vol. 127, No. 6, pp. 632–638.

Green, P.S., Fisher, J.M., and Pote, J. (2007), Technical Digest 11: Design of Lateral Load Resisting Frames Using Steel Joists and Joist Girders, Steel Joist Institute, Myrtle Beach, S.C.

Green, T.P., Leon, R.T., and Rassati, G.A. (2004), “Bidirectional Tests on Partially Restrained Composite Beam-to-Column Connections,” Journal of Structural Engineering, ASCE, Vol. 130, No. 2, pp. 320–327.

Griffis, L.G. (1992), “Composite Frame Construction,” Constructional Steel Design: An International Guide, Elsevier, pp. 523–553.

Grilli, D., Jones, R., and Kanvinde, A. (2017), “Seismic Performance of Embedded Column Base Connections Subjected to Axial and Lateral Loads,” Journal of Structural Engineering, ASCE, Vol. 143, No. 5, pp. 04017010-1–04017010-10.

Gron din, G.Y. and Behbahannidard, M.R. (2001), "Cyclic Behaviour of Three-Storey Unstiffened Steel Plate Shear Wall," Canadian Society of Civil Engineers Conference.

Gulec, C.K., Gibbons, B., Chen, A., Sim, H.B., and Uang, C.-M. (2012), “Full-Scale Testing of Transbay Terminal Center Eccentrically Braced Frame Link Beams,” Proceedings, 81st SEAOC Convention, Sacramento, Calif., pp. 455–479.

Gupta, A. and Krawinkler, H. (1999), Prediction of Seismic Demands for SMRFs with Ductile Connections and Elements, SAC/BD-99/06, SAC Joint Venture, Sacramento, Calif.

Gupta, U. (2013), “Cyclic Loading Analysis of Doubler Plate Attachment Details for Steel Moment Resisting Frames,” M.S. Thesis, Department of Civil, Architectural and Environmental Engineering, University of Texas at Austin, Austin, Tex.

Haaijer, G. and Thurlimann, B. (1958), “On Inelastic Buckling of Steel,” Journal of the Engineering Mechanics Division, ASCE, April.

Hamburger, R.O., Krawinkler, H., Malley, J.O., and Adan, S.M. (2009), “Seismic Design of Steel Special Moment Frames: A Guide for Practicing Engineers,” NIST GCR 09-917-3, NEHRP Seismic Design Technical Brief, No. 2.

Han, S.W., Kwon, G., and Moon, K.H. (2007), “Cyclic Behavior of Post-Northridge WUF-B Connections,” Journal of Constructional Steel Research, Vol. 63, No. 3, pp. 365–374.

Harmon, J.R. and Varma, A.H. (2021), “Local Buckling of Steel Faceplates Anchored to Concrete Infill in S-PSW/CF,” Thin-Walled Structures, Elsevier, Vol. 167, October, pp. 108230-1–108230-13.

Harries, K. A., Gong, B., and Shahrooz, B.M. (2000), “Behavior and Design of Reinforced Concrete, Steel, and Steel-Concrete Coupling Beams,” Earthquake Spectra, EERI, Vol. 16, No. 4, pp. 775–800.

Harries, K.A. and McNeice, D.S. (2006), “Performance-Based Design of High-Rise Coupled Wall Systems,” Structural Design of Tall and Special Structures, Vol. 15, No. 3, pp. 289–306.

Harries, K.A., Mitchell, D., Redwood, R.G., and Cook, W.D. (1997), "Seismic Design of Coupling Beams—A Case for Mixed Construction," Canadian Journal of Civil Engineering, Vol. 24, No. 3, pp. 448–459.

Harrold, A.J. (2004), “Examination of Expected Tensile Strength Ratios A529 Grade 50 and Grade 55, A572 Grade 55, & A1011 Grade 55,” MBMA Report No. 04-04.

Hassan, O. and Goel, S.C. (1991), Seismic Behavior and Design of Concentrically Braced Steel Structures, Report UMCE 91-1, University of Michigan, Department of Civil and Environmental Engineering, Ann Arbor, Mich.

Helwig, T. and Yura, J. (1999), “Torsional Bracing of Columns,” Journal of Structural Engineering, ASCE, Vol. 12, No. 5, pp. 547–555.

Herrera, R.A., Ricles, J.M., and Sause, R. (2008), “Seismic Performance Evaluation of a Large-Scale Composite MRF Using Pseudo-Dynamic Testing,” Journal of Structural Engineering, ASCE, Vol. 134, No. 2, pp. 279–288.

Hjelmstad, K.D. and Popov, E.P. (1983), "Cyclic Behavior and Design of Link Beams," Journal of Structural Engineering, ASCE, Vol. 109, No. 10, pp. 2,387–2,304.

Hsiao, P.C., Lehman, D.E., and Roeder, C.W. (2012), “Improved Analytical Model for Special Concentrically Braced Frames,” Journal of Constructional Steel Research, Elsevier, Vol. 73, pp. 80–94.

Hsieh, S.H. and Deierlein, G.G. (1991), “Nonlinear Analysis of Three-Dimensional Steel Frames with Semi-Rigid Connections,” Computers and Structures, Vol. 41, No. 5, pp. 995–1,009.

Huang, Y. and Mahin, S.A. (2010), "Simulating the Inelastic Seismic Behavior of Steel Braced Frames Including the Effects of Low-Cycle Fatigue," PEER Report 2010/104, Pacific Earthquake Engineering Research Center, University of California, Berkeley, Calif.

Huckelbridge, A.A. and Clough, R.W. (1977), "Earthquake Simulator Tests of Nine-Story Steel Frame with Columns Allowed to Uplift," Report No. UCB/EERC-77/23, Earthquake Engineering Research Center, Berkeley, Calif.

ICC (2006), IBC Structural/Seismic Design Manual, Volume 3: Building Design Examples for Steel and Concrete, International Code Council, Country Club Hills, Ill.

ICC (2008), Acceptance Criteria for Steel Moment Frame Connection Systems, AC 129, ICC Evaluation Service, Inc., Whittier, Calif.

ICC (2021), International Building Code, International Code Council, Country Club Hills, III.

Imani, R. and Bruneau, M. (2015), “Effect of Link-Beam Stiffener and Brace Flange Alignment on Inelastic Cyclic Behavior of Eccentrically Braced Frames,” Engineering Journal, AISC, Vol. 52, No. 2, pp. 109–124.

Imanpour, A., Auger, K., and Tremblay, R. (2015), “Seismic Design and Performance of Multi-Tiered Steel Braced Frames Including the Contribution from Gravity Columns,” Computers & Structures.

Imanpour, A., Stoakes, C., Tremblay, R., Fahnestock, L., and Daravan, D. (2013), “Seismic Stability Response of Columns in Multi-Tiered Braced Steel Frames for Industrial Applications,” Proceedings Structures Congress, ASCE, pp. 2,650–2,661.

Imanpour, A. and Tremblay, R. (2014), “Seismic Design of Steel Multi-Tiered Braced Frames: Application of Incremental Static Analysis for Design of Steel Multi-Tiered Braced Frames,” Proceedings Eurosteel, Naples, Italy, Paper No. 688.

Imanpour, A., Tremblay, R., Davaran, A., Stoakes, C., and Fahnestock, L. (2016a), “Seismic Performance Assessment of Multi-Tiered Steel Concentrically Braced Frames Designed in Accordance with the 2010 AISC Seismic Provisions,” Journal of Structural Engineering, ASCE, Vol. 142, No. 12, pp. 04016135-1–04016135-13.

Imanpour, A., Tremblay, R., Fahnestock, L., and Stoakes, C. (2016b), “Analysis and Design of Two-Tiered Steel Braced Frames Under In-Plane Seismic Demand,” Journal of Structural Engineering, ASCE, Vol. 142, No. 11, pp. 04016115-1–04016115-13.

Itani, A. and Goel, S.C. (1991), “Earthquake Resistant Design of Open Web Framing Systems,” Research Report No. UMCE 91-21, University of Michigan, Department of Civil and Environmental Engineering, Ann Arbor, Mich.

Jain, A., Goel, S.C., and Hanson, R.D. (1978), "Hysteresis Behavior of Bracing Members and Seismic Response of Braced Frames with Different Proportions," Research Report No. UMEF78R3, University of Michigan, Department of Civil Engineering, Ann Arbor, Mich.

Johnson, M. (2000), "Evaluation of the Effect of Welding Procedure on the Mechanical Properties of FCAW-S and SMAW Weld Metal Used in the Construction of Seismic Moment Frames," Report No. SAC/BD 00/12, SAC Joint Venture, Sacramento, Calif.

Kalyanaraman, V., Sridhara, B.N., and Thairani, V. (1998), "Core Loaded Earthquake Resistant Bracing Design," Proceedings of the 2nd International Conference on Steel Construction, San Sebastian, Spain.

Kanno, R. and Deierlein, G.G. (1997), "Seismic Behavior of Composite (RCS) Beam-Column Joint Subassemblies," Composite Construction III, ASCE, Reston, Va.

Kanvinde, A., Marshall, K., Grilli, D., and Bomba, G. (2014), “Forensic Analysis of Link Fractures in Eccentrically Braced Frames during the February 2011 Christchurch Earthquake: Testing and Simulation,” Journal of Structural Engineering, ASCE, Vol. 141, No. 5, pp. 04014146-1–04014146-15.

Kanvinde, A.M., Higgins, P., Cooke, R.J., and Perez, J. (2015), “Column Base Connections for Hollow Steel Sections: Seismic Performance and Strength Models,” Journal of Structural Engineering, ASCE, Vol. 141, No. 7, pp. 04014171-1–04014171-13.

Kanvinde, A.M., Jordan, S.J., and Cooke, R.J. (2013), “Exposed Column Base Plate Connections in Moment Frames—Simulations and Behavioral Insights,” Journal of Constructional Steel Research, Elsevier, Vol. 84, pp. 82–93.

Karamanci, E., and Lignos, D.G. (2014), “Computational Approach for Collapse Assessment of Concentrically Braced Frames in Seismic Regions,” Journal of Structural Engineering, ASCE, Vol. 140, No. 8, pp. A4014019-1–A4014019-15.

Kasai, K. and Popov, E.P. (1984), "On Seismic Design of Eccentrically Braced Steel Frames," Proceedings of the 8th World Conference on Earthquake Engineering, EERI, Vol. 5, pp. 387–394, San Francisco, Calif.

Kasai, K. and Popov, E.P. (1986a), "A Study of Seismically Resistant Eccentrically Braced Frames," Report No. UCB/EERC-86/01, Earthquake Engineering Research Center, Berkeley, Calif.

Kasai, K. and Popov, E.P. (1986b), “Cyclic Web Buckling Control for Shear Link Beams,” Journal of Structural Engineering, ASCE, Vol. 112, No. 3, pp. 505–523.

Kasai, K. and Popov, E.P. (1986c), "General Behavior of WF Steel Shear Link Beams," Journal of Structural Engineering, ASCE, Vol. 112, No. 2, pp. 362–382.

Kaufmann, E.J. and Fisher, J.W. (1995), "Experimental Investigations of Materials, Weldments, and Nondestructive Examination Techniques," Technical Report SAC 95-08, SAC Joint Venture, Sacramento, Calif.

Kaufmann, E.J. and Fisher, J.W. (2001), Effect of Straightening Method on the Cyclic Behavior of K-Area in Steel Rolled Shapes, ATLSS Center, Lehigh University, Bethlehem, Pa., December.

Kaufmann, E.J., Metrovich, B.R., and Pense, A.W. (2001), "Characterization of Cyclic Inelastic Strain Behavior on Properties of A572 Gr. 50 and A913 Gr. 50 Rolled Sections," ATLSS Center, Lehigh University, Bethlehem, Pa., August.

Kemp, A.R. (1986), “Factors Affecting the Rotation Capacity of Plastically Designed Members,” The Structural Engineer, Vol. 64B, No. 2, June.

Khatib, I., Mahin, S.A., and Pister, K.S. (1988), "Seismic Behavior of Concentrically Braced Steel Frames," Report No. UCB/EERC 88-01, Earthquake Engineering Research Center, Berkeley, Calif.

Kitayama, K., Otani, S., and Aoyama, H. (1987), “Earthquake Resistant Design Criteria for Reinforced Concrete Interior Beam-Column Joints,” Proceedings of the Pacific Conference on Earthquake Engineering, Wairakei, New Zealand.

Kizilarslan, E., Broberg, M., Shafaei, S., Varma, A.H., and Bruneau, M. (2021), “Seismic Design Coefficients and Factors for Coupled Composite Plate Shear Walls/Concrete Filled (CC-PSW/CF),” Engineering Structures, Elsevier, Vol. 244.

Koboevic, S., Rozon, J., and Tremblay, R. (2012), “Seismic Performance of Low-to-Moderate Height Eccentrically Braced Steel Frames Designed for North American Seismic Conditions,” Journal of Structural Engineering, ASCE, Vol. 138, No. 12, pp. 1,465–1,476.

Koester, B.D. (2000), “Panel Zone Behavior of Moment Connections Between Rectangular Concrete-Filled Steel Tubes and Wide Flange Beams,” Ph.D. Dissertation, University of Texas at Austin, Austin, Tex.

Korol, R.M. (1996), “Shear Lag in Slotted HSS Tension Members,” Canadian Journal of Civil Engineering, Vol. 23, pp. 1,350–1,354.

Krawinkler, H. (1978), “Shear in Beam-Column Joints in Seismic Design of Steel Frames,” Engineering Journal, AISC, Vol. 15, No. 3, pp. 82–91.

Kulak, G.L., Fisher, J.W., and Struik, J.H.A. (1987), Guide to Design Criteria for Bolted and Riveted Joints, 2nd Ed., John Wiley & Sons, New York, N.Y.

Lai, J.W and Mahin, S.A. (2013), “Experimental and Analytical Studies on the Seismic Behavior of Conventional and Hybrid Braced Frames,” PEER Report 2013/20, Pacific Earthquake Engineering Research Center, University of California, Berkeley, Calif.

Lamarche, C.P. and Tremblay, R. (2011), “Seismically Induced Cyclic Buckling of Steel Columns Including Residual-Stress and Strain-Rate Effects,” Journal of Constructional Steel Research, Elsevier, Vol. 67, No. 9, pp. 1,401–1,410.

LATBSDC (2017), An Alternative Procedure for Seismic Analysis and Design of Tall Buildings Located in the Los Angeles Region, Los Angeles Tall Buildings Structural Design Council, Los Angeles, Calif.

Lay, M.G. (1965), “Some Studies of Flange Local Buckling in Wide-Flange Shapes,” Journal of the Structural Division, ASCE, Vol. 91, No. 6, pp. 94–116.

Lee, D., Cotton, S.C., Dexter, R.J., Hajjar, J.F., Ye, Y., and Ojard, S.D. (2002), Column Stiffener Detailing and Panel Zone Behavior of Steel Moment Frame Connections, University of Minnesota, Minneapolis, Minn., June.

Lee, D., Cotton, S.C., Hajjar, J.F., Dexter, R.J., and Ye, Y. (2005a), “Cyclic Behavior of Steel Moment-Resisting Connections Reinforced by Alternative Column Stiffener Details: I. Connection Performance and Continuity Plate Detailing,” Engineering Journal, AISC, Vol. 42, No. 4, pp. 189–214.

Lee, D., Cotton, S.C., Hajjar, J.F., Dexter, R.J., and Ye, Y. (2005b), “Cyclic Behavior of Steel Moment-Resisting Connections Reinforced by Alternative Column Stiffener Details: II. Panel Zone Behavior and Doubler Plate Detailing,” Engineering Journal, AISC, Vol. 42, No. 4, pp. 215–238.

Lee, H. and Goel, S.C. (1990), “Seismic Behavior of Steel Built-Up Box-Shaped Bracing Members, and Their Use in Strengthening Reinforced Concrete Frames,” Report No. UMCE 90-7, University of Michigan, Ann Arbor, Mich.

Lee, P.-G., Shim, C.-S., and Chang, S.-P. (2005c), “Static and Fatigue Behavior of Large Stud Shear Connectors for Steel-Concrete Composite Bridges,” Journal of Constructional Steel Research, Elsevier, Vol. 61, No. 9, pp. 1,270–1,285.

Lee, S. and Goel, S.C. (1987), "Seismic Behavior of Hollow and Concrete-Filled Square Tubular Bracing Members," Report No. UMCE 87-11, University of Michigan, Department of Civil Engineering, Ann Arbor, Mich.

Lehman, D.E., Roeder, C.W., Herman, D., Johnson, S., and Kotulka, B. (2008), “Improved Seismic Performance of Gusset Plate Connections,” Journal of Structural Engineering, ASCE, Vol. 134, No. 6, pp. 890–901.

Leon, R.T. (1990), “Semi-Rigid Composite Construction,” Journal of Constructional Steel Research, Elsevier, Vol. 15, No. 2, Elsevier, pp. 99–120.

Leon, R.T. (1994), “Composite Semi-Rigid Construction,” Engineering Journal, AISC, Vol. 31, No. 2, pp. 57–67.

Leon, R.T. and Ammerman, D.J. (1990), “Semi-Rigid Composite Connections for Gravity Loads,” Engineering Journal, AISC, Vol. 27, No. 1, pp. 1–11.

Leon, R.T., Ammerman, D., Lin, J., and McCauley, R. (1987), “Semi-Rigid Composite Steel Frames,” Engineering Journal, AISC, Vol. 24, No. 4, pp. 147–156.

Leon, R.T. and Forcier, G.P. (1992), “Parametric Study of Composite Frames,” Proceedings of the Second International Workshop on Connections in Steel Structures, AISC, Chicago, Ill., pp. 152–159.

Leon, R.T., Hajjar, J.F., and Shield, C.K. (1997), “The Effect of Composite Floor Slabs on the Behavior of Steel Moment-Resisting Frames in the Northridge Earthquake,” Composite Construction in Steel and Concrete III, ASCE, Reston, Va., pp. 735–751.

Leon, R.T., Hoffman, J.J., and Staeger, T. (1996), Partially Restrained Composite Connections, Design Guide 8, AISC, Chicago, Ill.

Leon, R.T. and Kim, D.H. (2004), “Seismic Performance of PR Frames in Zones of Infrequent Seismicity,” Proceedings of the 13th World Conference in Earthquake Engineering, Paper 2696, IAE, Vancouver, British Columbia.

Li, C.H., Tsai, K.C., Lin, C.H., and Chen, P.C. (2010), “Cyclic Tests of Four Two-Story Narrow Steel Plate Shear Walls. Part 2: Experimental Results and Design Implications,” Earthquake Engineering and Structural Dynamics, Vol. 39, Issue 7, pp. 801–826.

Liang, X. and Parra-Montesinos, G. (2004), “Seismic Behavior of RCS Beam-Column-Slab Subassemblies and Frame Systems,” Journal of Structural Engineering, ASCE, Vol. 130, No. 2, pp. 310–319.

Libby, J.R. (1981), “Eccentrically Braced Frame Construction—A Case History,” Engineering Journal, AISC, Vol. 18, No. 4, pp. 149–153.

Liu, J. (2016), “Updates to Expected Yield Stress and Tensile Strength Ratios for Determination of Expected Member Capacity in the 2016 AISC Seismic Provisions,” Engineering Journal, AISC, Vol. 53, No. 4, pp. 215–227.

Liu, J., Sabelli, R., Brockenbrough, R.L., and Fraser, T.P. (2007), “Expected Yield Stress and Tensile Strength Ratios for Determination of Expected Member Capacity in the 2005 AISC Seismic Provisions,” Engineering Journal, AISC, Vol. 44, No. 1, pp. 15–25.

Liu, Z. and Goel, S.C. (1987), “Investigation of Concrete Filled Steel Tubes under Cyclic Bending and Buckling,” UMCE Report 87-3, University of Michigan, Ann Arbor, Mich.

Liu, Z. and Goel, S.C. (1988), “Cyclic Load Behavior of Concrete-Filled Tubular Braces,” Journal of the Structural Division, ASCE, Vol. 114, No. 7, pp. 1,488–1,506.

Lopez, W., Gwie, D.S., Lauck, T.W., and Saunders, C.M. (2004), "Structural Design and Experimental Verification of a Buckling-Restrained Braced Frame System," Engineering Journal, AISC, Vol. 41, No. 4, pp. 177–186.

MacRae, G., Roeder, C.W., Gunderson, C., and Kimura, Y. (2004), “Brace-Beam-Column Connections for Concentrically Braced Frames with Concrete Filled Tube Columns,” Journal of Structural Engineering, ASCE, Vol. 130, No. 2, pp. 233–243.

Malakoutian, M., Berman, J.W., and Dusicka, P. (2013), “Seismic Response Evaluation of the Linked Column Frame System,” Earthquake Engineering and Structural Dynamics, Vol. 42, pp. 795–814.

Malley, J.O. and Popov, E.P. (1983), "Design Considerations for Shear Links in Eccentrically Braced Frames," Earthquake Engineering Research Center Report EERC-83/24, University of California, Berkeley, Calif.

Malley, J.O. and Popov, E.P. (1984), “Shear Links in Eccentrically Braced Frames,” Journal of Structural Engineering, ASCE, Vol. 110, No. 9, pp. 2,275–2,295.

Mattock, A.H. and Gaafar, G.H. (1982), "Strength of Embedded Steel Sections as Brackets," ACI Journal, Vol. 79, No. 2, pp. 83-93.

Mays, T.W. (2000), "Application of the Finite Element Method to the Seismic Design and Analysis of Large Moment End-Plate Connections," Ph.D. Dissertation, Virginia Polytechnic Institute and State University, Blacksburg, Va.

McDaniel, C.C., Uang, C.-M., and Seible, F. (2002), “Cyclic Testing of Built-Up Steel Shear Links for the New Bay Bridge,” Journal of Structural Engineering, ASCE, Vol. 129, Vol. 6, pp. 801–809.

McManus, P.S., MacMahon, A., and Puckett, J.A. (2013), “Buckling Restrained Braced Frame with All-Bolted Gusset Connections,” Engineering Journal, AISC, Vol. 50, No. 2, pp. 89–116.

McMullin, K.M. and Astaneh-Asl, A. (1994), “Cyclical Behavior of Welded Steel Shear Studs,” Proceedings, Structures Congress XII, Atlanta, Ga., ASCE, pp. 1,024–1,029.

Merovich, A.T., Nicoletti, J.P., and Hartle, E. (1982), “Eccentric Bracing in Tall Buildings,” Journal of the Structural Division, ASCE, Vol. 108, No. 9, pp. 2,066–2,080.

Moghimi, H. and Driver, R.G. (2014a), “Performance-Based Capacity Design of Steel Plate Shear Walls. I: Development Principles,” Journal of Structural Engineering, ASCE, Vol. 140, No. 12, pp. 04014097-1–04014097-12.

Moghimi, H. and Driver, R.G. (2014b), “Performance-Based Capacity Design of Steel Plate Shear Walls. II: Design Provisions,” Journal of Structural Engineering, ASCE, Vol. 140, No. 12, pp. 04014098-1–04014098-14.

Motter, C.J., Fields, D.C., Hooper, J.D., Klemencic, R., and Wallace, J.W. (2017), “Steel-Reinforced Concrete Coupling Beams. I: Testing,” Journal of Structural Engineering, ASCE, Vol. 143, No. 3, pp. 04016191-1–04016191-11.

Nader, M.N. and Astaneh-Asl, A. (1992), “Seismic Design Concepts for Semi-Rigid Frames,” Proceedings Structures Congress, New York, N.Y, ASCE, pp. 971–975.

Nakashima, M., Kanao, I., and Liu, D. (2002), “Lateral Instability and Lateral Bracing of Steel Beams Subjected to Cyclic Loading,” Journal of Structural Engineering, ASCE, Vol. 128, No. 10, pp. 1,308–1,316.

Nakashima, M., Suita, K., Morisako, K., and Maruoka, Y. (1998), “Tests of Welded Beam-Column Subassemblies I: Global Behavior,” Journal of Structural Engineering, ASCE, Vol. 124, No. 11, pp. 1,236–1,244.

Newell, J.D. and Uang, C.-M. (2008), “Cyclic Behavior of Steel Wide-Flange Columns Subjected to Large Drift,” Journal of Structural Engineering, ASCE, Vol. 134, No. 8, pp. 1,334–1,342.

NFPA (2021), Building Construction and Safety Codes, NFPA 5000, National Fire Protection Association, Quincy, Mass.

Nishiyama, I., Hasegawa, T., and Yamanouchi, H. (1990), "Strength and Deformation Capacity of Reinforced Concrete Column to Steel Beam Joint Panels," Building Research Institute Report 71, Ministry of Construction, Tsukuba, Japan.

NIST (2015), “Seismic Design of Steel Buckling-Restrained Braced Frames: A Guide for Practicing Engineers,” GCR 15-917-34, NEHRP Seismic Design Technical Brief No. 11, National Institute of Standards and Technology, Gaithersburg, Md.

NIST (2017a), "Guidelines for Nonlinear Structural Analysis for Buildings, Part I— General," GCR 17-917-46v1, National Institute of Standards and Technology, Gaithersburg, Md.

NIST (2017b), “Guidelines for Nonlinear Structural Analysis for Buildings, Part Ila—Steel Moment Frames,” GCR 17-917-46v2, National Institute of Standards and Technology, Gaithersburg, Md.

NIST (2017c), “Recommended Modeling Parameters and Acceptance Criteria for Nonlinear Analysis in Support of Seismic Evaluation, Retrofit, and Design,” GCR-17-917-45, National Institute of Standards and Technology, Gaithersburg, Md.

Okazaki, T. (2004), "Seismic Performance of Link-to-Column Connections in Steel Eccentrically Braced Frames," Ph.D. Dissertation, Department of Civil Engineering, University of Texas at Austin, Austin, Tex.

Okazaki, T., Arce, G., Ryu, H., and Engelhardt, M.D. (2004a), "Recent Research on Link Performance in Steel Eccentrically Braced Frames," Proceedings of the 13th World Conference on Earthquake Engineering, August 1–6, 2004, Vancouver, British Columbia.

Okazaki, T., Engelhardt, M.D., Drolias, A., Schell, E., Hong, J.K., and Uang, C.-M. (2009), "Experimental Investigation of Link-to-Column Connections in Eccentrically Braced Frames," Journal of Constructional Steel Research, Elsevier, Vol. 65, pp. 1,401–1,412.

Okazaki, T., Engelhardt, M.D., Nakashima, M., and Suita, K. (2004b), “Experimental Study on Link-to-Column Connections in Steel Eccentrically Braced Frames,” Proceedings of the 13th World Conference on Earthquake Engineering, August 1–6, 2004, Vancouver, British Columbia.

OSHA (2010), Safety Standards for Steel Erection, Part Number 1926, Subpart R, Occupational Safety and Health Administration, Washington, D.C.

Ozaki, M., Akita, S., Osuga, H., Nakayama, T., and Adachi, N. (2004), “Study on Steel Plate Reinforced Concrete Panels Subjected to Cyclic In-Plane Shear,” Nuclear Engineering and Design, Vol. 228, pp. 225–244.

Ozkula, G., Uang, C.-M., and Harris, J. (2021), “Development of Enhanced Seismic Compactness for Webs in Wide-Flange Steel Columns,” Journal of Structural Engineering, ASCE, Vol. 147, No. 7, pp. 04021100-1–04021100-12.

Pallarés, L. and Hajjar, J.F. (2010a), “Headed Steel Stud Anchors in Composite Struc- tures: Part I. Shear,” Journal of Constructional Steel Research, Elsevier, Vol. 66, No. 2, pp. 198–212.

Pallarés, L. and Hajjar, J.F. (2010b), “Headed Steel Stud Anchors in Composite Struc- tures: Part II. Tension and Interaction,” Journal of Constructional Steel Research, Elsevier, Vol. 66, No. 2, pp. 213–228.

Palmer, K.D., Christopulos, A.D., Lehman, D.E., and Roeder, C.W. (2014), “Experimental Evaluation of Cyclically Loaded, Large-Scale, Planar and 3-D Buckling-Restrained Braced Frames,” Journal of Constructional Steel Research, Elsevier, Vol. 101, No. 6, pp. 415–425.

Park, R., Priestley, M.J.N., and Gill, W.D. (1982), “Ductility of Square Confined Concrete Columns,” Journal of the Structural Division, ASCE, Vol. 108, No. ST4, pp. 929–950.

Parra-Montesinos, G., Goel, S., and Kim, K.-Y. (2006), “Behavior of Steel Double Channel Built-Up Chords of STMF under Reversed Cyclic Bending,” Journal of Structural Engineering, ASCE, Vol. 132, No. 9, pp. 1,343–1,351.

Parra-Montesinos, G., Liang, X., and Wight, J.K. (2003), “Towards Deformation-Based Capacity Design of RCS Beam-Column Connections,” Engineering Structures, Vol. 25, No. 5, pp. 681–690.

Parra-Montesinos, G. and Wight, J.K. (2000), “Seismic Response of Exterior RC Column-to-Steel Beam Connections,” Journal of Structural Engineering, ASCE, Vol. 126, No. 10, pp. 1,113–1,121.

Parra-Montesinos, G. and Wight, J.K. (2001), "Modeling Shear Behavior of Hybrid RCS Beam-Column Connections," Journal of Structural Engineering, ASCE, Vol. 127, No. 1, pp. 3–11.

PEER/TBI (2017), Tall Buildings Initiative: Guidelines for Performance-Based Seismic Design of Tall Buildings, Pacific Earthquake Engineering Research Center, University of California, Berkeley, Calif.

Perlynn, M.J. and Kulak, G.L. (1974), "Web Slenderness Limits for Compact Beam-Columns," Structural Engineering Report No. 50, Department of Civil Engineering, University of Alberta, Edmonton, Alberta.

Pillai, U.S. (1974), “Beam-Columns of Hollow Sections,” Canadian Journal of Civil Engineer, Vol. 1, No. 2, pp. 194–198.

Popov, E.P., Blondet, M., Stepanov, L., and Stojadinovic, B. (1996), “Full-Scale Beam-to-Column Connection Tests,” University of California, Department of Civil Engineering, Berkeley, Calif.

Popov, E.P. and Engelhardt, M.D. (1988), “Seismic Eccentrically Braced Frames,” Journal of Constructional Steel Research, Elsevier, Vol. 10, pp. 321–354.

Popov, E.P., Engelhardt, M.D., and Ricles, J.M. (1989), “Eccentrically Brace Frames: U.S. Practice,” Engineering Journal, AISC, Vol. 26, No. 2, pp. 66–80.

Popov, E.P. and Stephen, R.M. (1977), "Tensile Capacity of Partial Penetration Welds," Journal of the Structural Division, ASCE, Vol. 103, No. ST9, pp. 1,721–1,729.

Purba, R. and Bruneau, M. (2007), “Design Recommendations for Perforated Steel Plate Shear Walls,” Technical Report MCEER-07-0011, Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, N.Y.

Purba, R. and Bruneau, M. (2009), “Finite Element Investigation and Design Recommendations for Perforated Steel Plate Shear Walls,” Journal of Structural Engineering, ASCE, Vol. 135, No. 11, pp. 1,367–1,376.

Purba, R. and Bruneau, M. (2012), “Case Study on the Impact of Horizontal Boundary Elements Design on Seismic Behavior of Steel Plate Shear Walls,” Journal of Structural Engineering, ASCE, Vol. 138, No. 5, pp. 647–657.

Purba, R. and Bruneau, M. (2014a), "Performance of Steel Plate Shear Walls Designed per Various Assumptions," MCEER Report 14-0005, MCEER, University at Buffalo, Buffalo, N.Y.

Purba, R. and Bruneau, M. (2014b), “Seismic Performance of Steel Plate Shear Walls Considering Two Different Design Philosophies of Infill Plates, I: Deterioration Model Development,” Journal of Structural Engineering, ASCE, Vol. 141, No. 6, pp. 04014160-1–04014160-12.

Purba, R. and Bruneau, M. (2014c), “Seismic Performance of Steel Plate Shear Walls Considering Two Different Design Philosophies of Infill Plates, II: Assessment of Collapse Potential,” Journal of Structural Engineering, ASCE, Vol. 141, No. 6, pp. 04014161-1–04014161-12.

Qin, F. (1993), “Analysis of Composite Connection between Reinforced Concrete Walls and Steel Coupling Beams,” M.S. Thesis, Department of Civil and Environmental Engineering, University of Cincinnati, Cincinnati, Ohio.

Qu, B. and Bruneau, M. (2008), “Seismic Behavior and Design of Boundary Frame Members in Steel Plate Shear Walls,” Technical Report MCEER-08-0012, Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, N.Y.

Qu, B. and Bruneau, M. (2009), “Design of Steel Plate Shear Walls Considering Boundary Frame Moment Resisting Action,” Journal of Structural Engineering, ASCE, Vol. 135, No. 12, pp. 1,511–1,521.

Qu, B. and Bruneau, M. (2010a), “Behavior of Vertical Boundary Elements in Steel Plate Shear Walls,” Engineering Journal, AISC, Vol. 47, No. 2, pp. 109–122.

Qu, B. and Bruneau, M. (2010b), “Capacity Design of Intermediate Horizontal Boundary Elements of Steel Plate Shear Walls,” Journal of Structural Engineering, ASCE, Vol. 136, No. 6, pp. 665–675.

Qu, B. and Bruneau, M. (2011), “Plastic Moment of Intermediate Horizontal Boundary Elements of Steel Plate Shear Walls,” Engineering Journal, AISC, Vol. 48, No. 1, pp. 49–64.

Qu, B., Bruneau, M., Lin, C.H., and Tsai, K.C. (2008), "Testing of Full-Scale Two-Story Steel Plate Shear Wall with Reduced Beam Section Connections and Composite Floors," Journal of Structural Engineering, ASCE, Vol. 134, No. 3, pp. 364–373.

Rai, D.C., Basha, H., and Goel, S.C. (1998), “Special Truss Moment Frames (STMF): Design Guide,” Research Report No. UMCEE 98-44, Department of Civil and Environmental Engineering, University of Michigan, Ann Arbor, Mich.

Rassati, G.A., Leon R.T., and Noe, S. (2004), “Component Modeling of Partially Restrained Composite Joints under Cyclic and Dynamic Loading,” Journal of Structural Engineering, ASCE, Vol. 130, No. 2, pp. 343–351.

RCSC (2020), Specification for Structural Joints Using High-Strength Bolts, Research Council on Structural Connections, American Institute of Steel Construction, Chicago, Ill, June 11.

Reina, P. and Normile, D. (1997), “Fully Braced for Seismic Survival,” Engineering News-Record, July 21, pp. 34–36.

Reynolds, M. and Uang, C.-M. (2022), “Economical Weld Details and Design for Continuity and Doubler Plates in Steel Special Moment Frames,” Journal of Structural Engineering, ASCE, Vol. 148, No. 1, pp 04021246-1–04021246-16.

Richards, P. (2004), “Cyclic Stability and Capacity Design of Steel Eccentrically Braced Frames,” Ph.D. Dissertation, University of California, San Diego, San Diego, Calif.

Richards, P. (2009), “Seismic Column Demands in Ductile Braced Frames,” Journal of Structural Engineering, ASCE, Vol. 135, No. 1, pp. 33–41.

Richards, P. and Uang, C.-M. (2003), “Development of Testing Protocol for Short Links in Eccentrically Braced Frames,” Report No. SSRP-2003/08, Department of Structural Engineering, University of California at San Diego, San Diego, Calif.

Richards, P., Uang, C.-M., Okazaki, T., and Engelhardt, M.D. (2004), “Impact of Recent Research Findings on Eccentrically Braced Frame Design,” Proceedings, 2004 SEAOC Convention, August, 25–28, 2004, Monterey, Calif.

Ricles, J.M. and Paboojian, S.D. (1994), “Seismic Performance of Steel-Encased Composite,” Journal of Structural Engineering, ASCE, 120(8), pp. 2,474–2,494.

Ricles, J.M., Peng, S.W., and Lu, L.W. (2004a), "Seismic Behavior of Composite Concrete Filled Steel Tube Column-Wide Flange Beam Moment Connections," Journal of Structural Engineering, ASCE, Vol. 130, No. 2, pp. 223-232.

Ricles, J.M. and Popov, E.P. (1987a), Dynamic Analysis of Seismically Resistant Eccentrically Braced Frames, Report No. UCB/EERC-87/107, Earthquake Engineering Research Center, Berkeley, Calif.

Ricles, J.M. and Popov, E.P. (1987b), Experiments on EBFs with Composite Floors, Report No. UCB/EERC-87/06, Earthquake Engineering Research Center, Berkeley, Calif.

Ricles, J.M., Zhang, X., Lu, L.W., and Fisher, J. (2004b), "Development of Seismic Guidelines for Deep Column Steel Moment Connections," ATLSS Report No. 04-13, Lehigh University, Bethlehem, Pa.

Roeder, C.W. (1987), Inelastic Dynamic Analysis of Two Eight-Story Moment Frames, Structural Engineers Association of Washington, Seattle, Wash.

Roeder, C.W. and Foutch, D.F. (1996), "Experimental Results for Seismic Resistant Steel Moment Frame Connections," Journal of Structural Engineering, ASCE, Vol. 122, No. 6, pp. 581–588.

Roeder, C.W., Lumpkin, E.J., and Lehman, D.E. (2011), “A Balanced Design Procedure for Special Concentrically Braced Frame Connections,” Journal of Constructional Steel Research, Elsevier, Vol. 67, pp. 1,760–1,772.

Roeder, C.W. and Popov, E.P. (1978), “Eccentrically Braced Frames for Earthquakes,” Journal of the Structural Division, ASCE, Vol. 104, No. 3, March, pp. 391–412.

Roeder, C.W., Sen, A.D., Asada, H., Ibarra, S.M., Lehman, D.E., Berman, J.W., Tsai, K.-C., Tasi, C.-Y., Wu, A.-C., Wang, K.-J., and Liu, R. (2020), “Inelastic Behavior and Seismic Design of Multistory Chevron-Braced Frames with Yielding Beams,” Journal of Constructional Steel Research, Elsevier, Vol. 167, pp. 105817-1–105817-18.

Roeder, C.W., Sen, A.D., Terpstra, C., Ibarra, S.M., Liu, R., Lehman, D.E., and Berman, J.W. (2019), “Effect of Beam Yielding on Chevron Braced Frames,” Journal of Constructional Steel Research, Elsevier, Vol. 159, pp. 428–441.

Saari, W.K., Hajjar, J.F., Schultz, A.E., and Shield, C.K. (2004), “Behavior of Shear Studs in Steel Frames with Reinforced Concrete Infill Walls,” Journal of Constructional Steel Research, Elsevier, Vol. 60, pp. 1,453–1,480.

Saatcioglu, M. (1991), Deformability of Steel Columns, ACI 127.5, American Concrete Institute, Detroit, Mich.

Sabelli, R. and Bruneau, M. (2006), Steel Plate Shear Walls, Design Guide 20, AISC, Chicago, Ill.

Sabelli, R., Mahin, S., and Chang, C. (2003), “Seismic Demands on Steel Braced Frame Buildings with Buckling-Restrained Braces,” Engineering Structures, Vol. 25, pp. 655–666.

Sabelli, R., Sabol, T., and Easterling, W.S. (2011), “Seismic Design of Composite Steel Deck and Concrete-Filled Diaphragms,” NEHRP Seismic Design Technical Brief No. 5, National Institute of Standards and Technology, Gaithersburg, Md., MIST GCR 11-917-10.

Sabouri-Ghomi, S., Ventura, C.E., and Kharrazi, M.H.K. (2005), Shear Analysis and Design of Ductile Steel Plate Walls,” Journal of Structural Engineering, ASCE, Vol. 131, No. 6, pp. 878–889.

SAC (1996), Experimental Investigations of Beam-Column Subassemblages, SAC 96-01, SAC Joint Venture, Sacramento, Calif.

SAC (1997), "Protocol for Fabrication, Inspection, Testing, and Documentation of Beam-Column Connection Tests and Other Specimens," SAC/BD-97/02 Version 1.1, SAC Joint Venture, Sacramento, Calif.

SAC (2000), “Loading Histories for Seismic Performance Testing of SMRF Components and Assemblies,” SAC/BD-00/10, SAC Joint Venture, Sacramento, Calif.

Salmon, C.G. and Johnson, J.E. (1996), Steel Structures: Design and Behavior, 4th Ed., HarperCollins College Publishers, New York, N.Y.

Santhakumar, A.R. (1974), “Ductility of Coupled Shear Walls,” Ph.D. Dissertation, Department of Civil Engineering, University of Canterbury, Canterbury, New Zealand.

Sawyer, H.A. (1961), “Post-Elastic Behavior of Wide-Flange Steel Beams,” Journal of the Structural Division, ASCE, Vol. 87, No. ST8, pp. 43–71.

Schaefer, B.W., Geschwindner, L., Sabol, T., and Uang, C.-M. (2022), “Review of Local Buckling Width-to-Thickness Limits,” Engineering Journal, AISC, Vol. 59, No. 1, pp. 65–84.

Schneider, S.P., Roeder, C.W., and Carpenter, J.E. (1991), "Seismic Performance of Weak-Column Strong-Beam Steel Moment Resisting Frames," University of Washington, Department of Civil Engineering, Seattle, Wash.

SDI (2001), Standard Practice Details, No. SPD2, Steel Deck Institute, Fox River Grove, Ill.

SDI (2007), Design Manual for Composite Decks, Form Decks and Roof Decks, No. 31, Steel Deck Institute, Fox River Grove, Ill.

SDI (2015), Diaphragm Design Manual, 3rd Ed., No. DDMO3, Steel Deck Institute, Fox River Grove, Ill.

SDI (2017), ANSI/SDI C-2011 Standard for Composite Steel Floor Deck-Slabs, Steel Deck Institute, Glenshaw, Pa.

Seo, J., Varma, A.H., Sener, K., and Ayhan, D. (2016), “Steel-Plate Composite (SC) Walls: In-Plane Shear Behavior, Database, and Design,” Journal of Constructional Steel Research, Elsevier, Vol. 119, pp. 202–215.

Shafaei, S., Varma, A.H., Broberg, M., and Klemencic, R. (2021a), “Modeling the Cyclic Behavior of Composite Plate Shear Walls/Concrete Filled (C-PSW/CF),” Journal of Constructional Steel Research, Elsevier, Vol. 184, No. 9, pp. 106810-1–106810-16.

Shafaei, S., Varma, A.H., Seo, J., and Klemencic, R. (2021b), “Cyclic Lateral Loading Behavior of Composite Plate Shear Walls/Concrete Filled,” Journal of Structural Engineering, ASCE, Vol. 147, No. 10, pp. 04021145-1–04021145-18.

Shahrooz, B.M., Remetter, M.E., and Qin, F. (1993), “Seismic Design and Performance of Composite Coupled Walls,” Journal of Structural Engineering, ASCE, Vol. 119, No. 11, pp. 3,291–3,309.

Shaw, S.M., Stillmaker, K., and Kanvinde, A.M. (2015), “Seismic Response of Partial-Joint-Penetration Welded Column Splices in Moment-Resisting Frames,” Engineering Journal, AISC, Vol. 52, No. 2, pp. 87–108.

Sheikh, S.A. and Uzumeri, S.M. (1980), “Strength and Ductility of Tied Concrete Columns,” Journal of the Structural Division, ASCE, Vol. 106, No. ST5, pp. 1,079–1,102.

Sheikh, T.M., Deierlein, G.G., Yura, J.A., and Jirsa, J.O. (1989), “Part 1: Beam Column Moment Connections for Composite Frames,” Journal of Structural Engineering, ASCE, Vol. 115, No. 11, pp. 2,859–2,876.

Shen, J., Sabol, T., Akbas, B., and Sutchiewcharn, N. (2010), “Seismic Demand on Column Splices in Steel Moment Frames,” Engineering Journal, AISC, Vol. 47, No. 4, pp. 223–240.

Shin, S., and Engelhardt, M. (2013), “Experimental Study on Panel Zone Behavior in Steel Moment Resisting Frames,” Proceedings 7th International Symposium on Steel Structures, Jeju, Korea.

Shirsat, P. (2011), “Preliminary Analysis of Doubler Plate Attachment Details for Steel Moment Resisting Frames,” M.S. Thesis, Department of Civil, Architectural and Environmental Engineering, University of Texas at Austin, Austin, Tex.

Shishkin, J.J., Driver, R.G., and Grondin, G.Y. (2005), “Analysis of Steel Plate Shear Walls Using the Modified Strip Model,” Structural Engineering Report No. 261, Department of Civil and Environmental Engineering, University of Alberta, Edmonton, Alberta.

Shishkin, J.J., Driver, R.G., and Grondin, G.Y. (2009), “Analysis of Steel Plate Shear Walls Using the Modified Strip Model,” Journal of Structural Engineering, ASCE, Vol. 135, No. 11, pp. 1,357–1,366.

SIE (1999a), "Report on Pre-Prototype Tests of Yielding Braces," Seismic Isolation Engineering, Calif.

SIE (1999b), “Tests of Nippon Steel Corporation Unbonded Braces,” Report to Ove Arup & Partners, Seismic Isolation Engineering.

Sizemore, J.G., Fahnestock, L.A., Hines, E.M., and Bradley, C.R. (2017), “Parametric Study of Low-Ductility Concentrically Braced Frames under Cyclic Static Loading,” Journal of Structural Engineering, ASCE, Vol. 143, No. 6, pp. 04017032-1–04017032-12.

Skiadopoulos, A. and Lignos, D.G. (2021), “Development of Inelastic Panel Zone Data-base,” Journal of Structural Engineering, ASCE, Vol. 147, No. 4, pp. 1–14.

Slutter, R. (1981), “Tests of Panel Zone Behavior in Beam Column Connections,” Lehigh University Report No. 200.81.403.1, Lehigh University, Bethlehem, Pa.

SSPC (1994), Statistical Analysis of Tensile Data for Wide Flange Structural Shapes, Struc- tural Shape Producers Council, analyzed by Dean Read and Karl Frank of the University of Texas.

Stillmaker, K., Kanvinde, A.M., and Galasso, C. (2015), “Follow-Up Fracture Mechanics Analysis of Column Splice Connections with Partial Joint Penetration Welds Using the Master Curve Approach,” Report Submitted to the American Institute of Steel Construction, July.

Stoakes, C.D. and Fahnestock, L.A. (2010), “Flexural Behavior of Concentrically-Braced Frame Beam-Column Connections,” Proceedings 2010 Structures Congress, ASCE, Orlando, Fla.

Stoakes, C.D. and Fahnestock, L.A. (2013), "Three-Dimensional Finite Element Simulation of the Seismic Behavior and Performance of Multi-Tier Braced Frames," Interim Report to AISC, September 3.

Suita, K., Nakashima, M., and Morisako, K. (1998), “Tests of Welded Beam-Column Sub-assemblies II: Detailed Behavior,” Journal of Structural Engineering, ASCE, Vol. 124, No. 11, pp. 1,245–1,252.

Takeuchi, T., Ozaki, H., Matsui, R., and Sutcu, F. (2014), “Out-of-Plane Stability of Buckling-Restrained Braces Including Moment Transfer Capacity,” Earthquake Engineering and Structural Dynamics, Vol. 43, pp. 851–869.

Tang, X. and Goel, S.C. (1987), “Seismic Analysis and Design Considerations of Braced Steel Structures,” Report UMCE 87-4, University of Michigan, Department of Civil and Environmental Engineering, Ann Arbor, Mich.

Tang, X. and Goel, S.C. (1989), “Brace Fractures and Analysis of Phase I Structure,” Journal of Structural Engineering, ASCE, Vol. 115, No. 8, pp. 1,960–1,976.

Tebedge, N. and Chen, W.F. (1974), "Design Criteria for Steel H-Columns Under Biaxial Loading," Journal of the Structural Division, ASCE, Vol. 100, No. ST3, pp. 579–598.

Thermou, G.E., Elnashai, A.S., Plumier, A., and Doneaux, C. (2004), "Seismic Design and Performance of Composite Frames," Journal of Constructional Steel Research, Elsevier, Vol. 60, pp. 31–57.

Thornton, W.A. and Muir, L.S. (2008), “Vertical Bracing Connections in the Seismic Regime,” Proceedings Connections VI: Sixth International Workshop on Connections in Steel Structures, American Institute of Steel Construction, Chicago, Ill.

Toellner, B.W., Watkins, C.E., Abbas, E.K., and Eatherton, M.R. (2015), “Experimental Investigation on the Seismic Behavior of Steel Moment Connections with Decking Attachments,” Journal of Constructional Steel Research, Elsevier, Vol. 105, pp. 174–185.

Tort, C. and Hajjar, J.F. (2004), “Damage Assessment of Rectangular Concrete-Filled Steel Tubes for Performance-Based Design,” Earthquake Spectra, EERI, Vol. 20, No. 4, Oakland, Calif., pp. 1,317–1,348.

Tremblay, R. (2000), “Influence of Brace Slenderness on the Seismic Response of Concentrically Braced Steel Frames,” Behaviour of Steel Structures in Seismic Areas—Stessa 2000: Proceedings of the Third International Conference, August 21–24, 2000, F.M. Mazzolani and, R. Tremblay, eds., Montreal, Quebec, pp. 527–534.

Tremblay, R. (2001), "Seismic Behavior and Design of Concentrically Braced Steel Frames," Engineering Journal, AISC, Vol. 38, No. 3, pp. 148–166.

Tremblay, R. (2003), "Achieving a Stable Inelastic Seismic Response for Multi-Story Concentrically Braced Steel Frames," Engineering Journal, AISC, Vol. 40, No. 2, pp. 111-129.

Tremblay, R., Degrange, G., and Blouin, J. (1999), “Seismic Rehabilitation of a Four-Storey Building with a Stiffened Bracing System,” Proceedings of the 8th Canadian Conference on Earthquake Engineering, Canadian Association for Earthquake Engineering, Vancouver, British Columbia, pp. 549–554,

Tremblay, R., Tchebotarev, N., and Filiatrault, A. (1997), "Seismic Performance of RBS Connections for Steel Moment Resisting Frames: Influence of Loading Rate and Floor Slab," Proceedings STESSA '97, Kyoto, Japan.

Tremblay, R. and Tirca, L. (2003), “Behavior and Design of Multi-Storey Zipper Concentrically Braced Steel Frames for the Mitigation of Soft-Storey Response,” Proceedings STESSA, Balkema, Naples, Italy.

Tsai, C.-Y., Tsai, K.-C., Lin, P.-C., Ao, W.-H., Roeder, C. W., Mahin, S.A., Lin, C.-H., Yu, Y.-J., Wang, K.-J., Wu, A.-C., Chen, J.-C., and Lin, T.-H. (2013), “Seismic Design and Hybrid Tests of a Full-Scale Three-Story Concentrically Braced Frame Using In-Plane Buckling Braces,” Earthquake Spectra, EERI, Vol. 29, No. 3, pp. 1,043–1,067.

Tsai, K.-C., Weng, Y.-T., Lin, M.-L., Chen, C.-H., Lai, J.-W., and Hsiao, P.-C. (2003), “Pseudo Dynamic Tests of a Full-Scale CFT/BRB Composite Frame: Displacement Based Seismic Design and Response Evaluations,” Proceedings of the International Workshop on Steel and Concrete Composite Construction (IWSCCC-2003), Report No. NCRE-03-026, National Center for Research in Earthquake Engineering, Taipei, Taiwan, pp. 165–176.

Uang, C.-M. and Bondad, D.M. (1996), “Dynamic Testing of Full-Scale Steel Moment Connections,” Proceedings of the 11th World Conference in Earthquake Engineering, Paper No. 407, WCEE, Acapulco, Mexico.

Uang, C.-M. and Chi, B. (2001), Effect of Straightening Method on the Cyclic Behavior of k Area in Steel Rolled Shapes, Report No. SSRP-2001/05, University of California, San Diego, Calif.

Uang, C.-M. and Fan, C.C. (2001), “Cyclic Stability Criteria for Steel Moment Connections with Reduced Beam Section,” Journal of Structural Engineering, ASCE, Vol. 127, No. 9, pp. 1021–1027.

Uang, C.-M. and Nakashima, M. (2003), “Steel Buckling-Restrained Frames,” Earthquake Engineering: Recent Advances and Applications, Chapter 16, Y. Bozorgnia and V.V. Bertero, eds., CRC Press, Boca Raton, Fla.

Uriz, P. and Mahin, S.A. (2004), "Seismic Performance Assessment of Concentrically Braced Steel Frames," Proceedings of 13th World Conference on Earthquake Engineering, Vancouver, British Columbia, August 1–6, 2004, Paper No. 1639.

Uriz, P. and Mahin, S.A. (2008), "Toward Earthquake-Resistant Design of Concentrically Braced Steel-Frame Structures," PEER Report 2008/08, Pacific Earthquake Engineering Research Center, University of California, Berkeley, Calif.

Varma, A.H., Broberg, M., Shafaei, S., and Taghipour, A.A. (2022), SpeedCore Systems for Steel Structures, Design Guide 38, AISC, Chicago, Ill.

Varma, A.H., Malushte, S., Sener, K., and Lai, Z. (2014), “Steel-Plate Composite (SC) Walls for Safety Related Nuclear Facilities: Design for In-Plane Force and Out-of-Plane Moments,” Nuclear Engineering and Design, Special Issue on SMiRT-21 Conference, Vol. 269, pp. 240–249.

Varma, A.H., Ricles, J.M., Sause, R., and Lu, L.W. (2002), “Experimental Behavior of High Strength Square Concrete Filled Tube Columns,” Journal of Structural Engineering, ASCE, Vol. 128, No. 3, pp. 309–318.

Varma, A.H., Ricles, J.M., Sause, R., and Lu, L.W. (2004), “Seismic Behavior and Design of High Strength Square Concrete Filled Tube Beam Columns,” Journal of Structural Engineering, ASCE, Vol. 130, No. 2, pp. 169–179.

Varma, A.H., Shafaei, S., and Klemencic, R. (2019), “Steel Modulus of Composite Plate Shear Walls: Behavior, Stability, and Design,” Journal of Constructional Steel Research, Elsevier, Vol. 145, pp. 106384-1–106384-15.

Vian, D. and Bruneau, M. (2005), “Steel Plate Walls for Seismic Design and Retrofit of Building Structures,” Technical Report MCEER-05-0010, Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, N.Y.

Vian D., Bruneau, M., and Purba, R. (2009a), “Special Perforated Steel Plate Shear Walls with Reduced Beam Section Anchor Beams II: Analysis and Design Recommendations,” Journal of Structural Engineering, ASCE, Vol. 135, No. 3, pp. 221–228.

Vian D., Bruneau, M., Tsai, K.C., and Lin, Y.C. (2009b), "Special Perforated Steel Plate Shear Walls with Reduced Beam Section Anchor Beams I: Experimental Investigation," Journal of Structural Engineering, ASCE, Vol. 135, No. 3, pp. 211–220.

Viest, I.M., Colaco, J.P., Furlong, R.W., Griffis, L.G., Leon, R.T., and Wyllie, L.A., Jr. (1997), Composite Construction: Design for Buildings, McGraw-Hill/ASCE, Reston, Va.

Wada, A., Connor, J., Kawai, H., Iwata, M., and Watanabe, A. (1994), “Damage Tolerant Structure,” ATC-15-4 Proceedings of Fifth US-Japan Workshop on the Improvement of Building Structural Design and Construction Practices, Applied Technology Council, Redwood City, Calif., pp. 27–39.

Wada, A., Saeki, E., Takeuchi, T., and Watanabe, A. (1998), “Development of Unbonded Brace,” Nippon Steel’s Unbonded Braces (promotional document), pp. 1–16, Nippon Steel Corporation Building Construction and Urban Development Division, Tokyo, Japan.

Wallace, B.J. and Krawinkler, H. (1985), Small-Scale Model Experimentation on Steel Assemblies, John A. Blume Earthquake Engineering Center Report No. 75, Stanford University Department of Civil Engineering, Palo Alto, Calif.

Wang, Q., Liu, Y., Luo, J., and Lebet, J.-P. (2011), Experimental Study on Stud Shear Connectors with Large Diameter and High Strength, International Conference on Electric Technology and Civil Engineering (ICETCE), Lushan, China.

Watanabe, A., Hitomi Y., Saeki, E., Wada, A., and Fujimoto, M. (1988), "Properties of Brace Encased in Buckling-Restraining Concrete and Steel Tube," Proceedings of Ninth World Conference on Earthquake Engineering, Vol. IV, Japan Association for Earthquake Disaster Prevention, Tokyo-Kyoto, Japan, pp. 719–724.

Webster, D.J., Berman, J.W., and Lowes, L.N. (2014), “Experimental Investigation of SPSW Web Plate Stress Field Development and Vertical Boundary Element Demand,” Journal of Structural Engineering, ASCE, Vol. 140, No. 6, pp. 04014011-1–04014011-11.

West, M.A., Fisher, J.M., and Griffis, L.G. (2003), Serviceability Design Considerations for Steel Buildings, Design Guide 3, 2nd Ed., AISC, Chicago, Ill.

Whittaker, A.S., Uang, C.-M., and Bertero, V.V. (1987), "Earthquake Simulation Tests and Associated Studies of a 0.3-Scale Model of a Six-Story Eccentrically Braced Steel Structure," Report No. UBC/EERC-87/02, Earthquake Engineering Research Center, Berkeley, Calif.

Wu, T.Y., El-Tawil, S., and McCormick, J. (2018), “Highly Ductile Limits for Deep Steel Columns,” Journal of Structural Engineering, ASCE, Vol. 144, No. 4, pp. 04018016-1–04018016-13.

Xu, P. and Goel, S.C. (1990), “Behavior of Double Channel Bracing Members Under Large Cyclic Deformations,” Report No. UMCE 90-1, University of Michigan Department of Civil Engineering, Ann Arbor, Mich.

Yamanouchi, H., Nishiyama, I., and Kobayashi, J. (1998), “Development and Usage of Composite and Hybrid Building Structure in Japan,” ACI SP-174, ACI, pp. 151–174.

Yang, C.S., Leon, R.T., and DesRoches, R. (2008), “Design and Behavior of Zipper-Braced Frames,” Engineering Structures, Elsevier, Vol. 30, No. 4, pp. 1,092–1,100.

Yang, F. and Mahin, S. (2005), “Limiting Net Section Fracture in Slotted Tube Braces,” Steel TIPS Report, Structural Steel Education Council, Moraga, Calif.

Yura, J.A., Galambos, T.V., and Ravindra, K. (1978), “The Bending Resistance of Steel Beams,” Journal of the Structural Division, ASCE, Vol. 104, No. ST9, pp. 1,355–1,370.

Zaboli, B., Clifton, G.C., and Cowie, K. (2018), “BRBF and CBF Gusset Plates: Out-of-Plane Stability Design Using a Simplified Notional Load Yield Line (NLYL) Method,” SESOC Journal, SESOC, Vol. 31, No. 1, pp. 64–76.

Zandonini, R. and Leon, R.T. (1992), “Composite Connections,” Constructional Steel Design: An International Guide, Elsevier, pp. 501–522.

Zaremba, C.J. (1988), “Strength of Steel Frames Using Partial Composite Girders,” Journal of Structural Engineering, ASCE, Vol. 114, No. 8, pp. 1,741–1,760.

Zhang, K., Seo, J., and Varma, A.H. (2020), “Steel-Plate Composite Walls: Local Buckling and Design for Axial Compression,” Journal of Structural Engineering, ASCE, Vol. 146, No. 4, pp. 04020044-1–04020044-15.

Zhang, K., Varma, A.H., Malushte, S., and Gallocher, S. (2014), “Effects of Shear Connectors on the Local Buckling and Composite Action in Steel Concrete Composite Walls,” Nuclear Engineering and Design, Elsevier, Special Issue on SMiRT-21 Conference, Vol. 269, pp. 231–239.

Zhao, Q. and Astaneh-Asl, A. (2004), “Cyclic Behavior of Traditional and Innovative Composite Shear Walls,” Journal of Structural Engineering, ASCE, Vol. 130, No. 2, pp. 271–284.

Ziemian, R.D. (ed.) (2010), Guide to Stability Design Criteria for Metal Structures, 6th Ed., John Wiley & Sons, Inc., Hoboken, N.J.

Smarter. Stronger. Steel. American Institute of Steel Construction 130 E Randolph St, Ste 2000 Chicago, IL 60601 312.670.2400 | www.aisc.org