| IS No. | Title | IS No. | Title |
|---|---|---|---|
| 456: 2000 | Plain and reinforced concrete — Code of practice (fourth revision) | 1030: 1998 | Carbon steel castings for general engineering purposes (fifth revision) |
| 513: 1994 | Cold-rolled low carbon steel sheets and strips (fourth revision) | 1079: 1994 | Hot rolled carbon steel sheets and strips — Specification (fifth revision) |
| 801: 1975 | Code of practice for use of cold-formed light gauge steel structural members in general building construction (first revision) | 1148: 1982 | Specification for hot-rolled rivet bars (up to 40 mm diameter) for structural purposes (third revision) |
| 1149: 1982 | High tensile steel rivet bars for structural purposes (third revision) | ||
| 808: 1989 | Dimensions for hot-rolled steel beam, column, channel and angle sections (third revision) | 1261: 1959 | Code of practice for seam welding in mild steel |
| 813: 1986 | Scheme of symbols for welding | 1278: 1972 | Specification for filler rods and wires for gas welding (second revision) |
| 814: 2004 | Covered electrodes for manual metal arc welding of carbon and carbon manganese steel — Specification (sixth revision) | 1323: 1982 | Code of practice for oxy-acetylene welding for structural work in mild steels (second revision) |
| 816: 1969 | Code of practice for use of metal arc welding for general construction in mild steel (first revision) | 1363 | Hexagon head bolts, screws and nuts of product grade C: |
| 817 | Training of welders — Code of practice: | (Part 1): 2002/ ISO 4016:1999 | Hexagon head bolts (size range M5 to M64) (fourth revision) |
| (Part 1): 1992 | Manual metal arc welding (second revision) | (Part 2): 2002/ ISO 4018:1999 | Hexagon head screws (size range M5 to M64) (fourth revision) |
| (Part 2): 1996 | Oxyfuel welding (second revision) | (Part 3): 1992/ ISO 4034:1986 | Hexagon nuts (size range M5 to M64) (third revision) |
| 819: 1957 | Code of practice for resistance spot welding for light assemblies in mild steel | 1364 | Hexagon head bolts, screws and nuts of product grades A and B: |
| 875 | Code of practice for design loads (other than earthquake) for buildings and structures: | (Part 1): 2002/ ISO 4014:1999 | Hexagon head bolts (size range M1.6 to M64) (fourth revision) |
| (Part 1): 1987 | Dead loads – unit weights of building materials and stored materials (second revision) | (Part 2): 2002/ ISO 4017:1999 | Hexagon head screws (size range M1.6 to M64) (fourth revision) |
| (Part 2): 1987 | Imposed loads (second revision) | (Part 3): 2002/ ISO 4032:1999 | Hexagon nuts, style 1 (size range M1.6 to M64) (fourth revision) |
| (Part 3): 1987 | Wind loads (second revision) | (Part 4): 2003/ ISO 4035:1999 | Hexagon thin nuts (chamfered) (size range M1.6 to M64) (fourth revision) |
| (Part 4): 1987 | Snow loads (second revision) | (Part 5): 2002/ ISO 4036:1999 | Hexagon thin nuts — Product grade B (unchamfered) (size range M1.6 to M10) (fourth revision) |
| (Part 5): 1987 | Special loads and load combinations (second revision) | 1367 | Technical supply conditions for threaded steel fasteners: |
| 919 | ISO systems of limits and fits: | (Part 1): 2002/ ISO 8992:1986 | General requirements for bolts, screws and studs (third revision) |
| (Part 1): 1993/ ISO 286-1:1988 | Bases of tolerance, deviations and fits (second revision) | (Part 2): 2002/ ISO4759-1:2000 | Tolerances for fasteners — Bolts, screws, studs and nuts — Product grades A, B and C (third revision) |
| (Part 2): 1993/ ISO 286-2:1988 | Tables of standard tolerance grades and limit deviations for holes and shafts (first revision) | (Part 3): 2002/ ISO 898-1:1999 | Mechanical properties of fasteners made of carbon steel and alloy steel — bolts, screws and studs (fourth revision) |
| 962: 1989 | Code of practice for architectural and building drawings (second revision) | ||
| 1024: 1999 | Code of practice for use of welding in bridges and structures subject to dynamic loading (second revision) |
| IS No. | Title | IS No. | Title |
|---|---|---|---|
| (Part 5) : 2002/ISO 898-5:1998 | Mechanical properties of fasteners made of carbon steel and alloy steel —set screws and similar threaded fasteners not under tensile stresses (third revision) | 1477 (Part 1): 1971 (Part 2): 1971 | Code of practice for painting of ferrous metals in buildings: Pre-treatment (first revision) Painting (first revision) |
| (Part 6): 1994/ ISO 898-2:1992 | Mechanical properties and test methods for nuts with specified proof loads (third revision) | 1608: : 2005/ ISO 6892:1998 | Metallic materials —Tensile testing at ambient temperatures (third revision) |
| (Part 7): 1980 | Mechanical properties and test methods for nuts without specified proof loads (second revision) | 1641:1988 | Code of practice for fire safety of buildings (general): General principles of fire grading and classification (first revision) |
| (Part 8): 2002/ ISO 2320:1997 | Prevailing torque type steel hexagon nuts — Mechanical and performance properties (third revision) | 1642:1989 | Code of practice for fire safety of buildings (general): Details of construction (first revision) |
| (Part 9) | Surface discontinuities | 1643:1988 | Code of practice for fire safety of buildings (general): Exposure hazard (first revision) |
| Sec 1:1993/ ISO 6157-1:1988 | Bolts, screws and studs for general application (third revision) | 1852:1985 | Rolling and cutting tolerance for hot rolled steel products (fourth revision) |
| Sec 2:1993/ ISO 6157-3:1988 | Bolts, screws and studs for special applications (third revision) | 1875:1992 | Specification for carbon steel billets, blooms, slabs and bars for forgings (fifth revision) |
| (Part 10):2002/ ISO 6157-2:1995 | Surface discontinuities — Nuts (third revision) | 1893 (Part 1): 2002 | Criteria for earthquake resistant design of structures: Part 1 General provisions and buildings |
| (Part 11):2002/ ISO 4042:1999 | Electroplated coatings (third revision) | 1929:1982 | Specification for hot forged steel rivets for hot closing (12 to 36 mm diameter) (first revision) |
| (Part 12):1981 | Phosphate coatings on threaded fasteners (second revision) | 1990:1973 | Steel rivet and stay bars for boilers (first revision) |
| (Part 13):1983 | Hot dip galvanized coatings on threaded fasteners (second revision) | 2002:1992 | Steel plates for pressure vessels for intermediate and high temperature service including boilers (second revision) |
| (Part 14) | Mechanical properties of corrosion-resistant stainless-steel fasteners, | ||
| Sec 1: 2002/ ISO 3506-1:1997 | Bolts, screws and studs (third revision) | 2062:2006 | Hot rolled low, medium and high tensile structural steel (sixth revision) |
| Sec 2: 2002/ ISO 3506-2:1997 | Nuts (third revision) | 2155:1982 | Specification for cold forged solid steel rivets for hot closing (6 to 16 mm diameter) (first revision) |
| Sec 3: 2002/ ISO 3506-3:1997 | Set screws and similar fasteners not under tensile stress (third revision) | 2708:1993 | 1.5 percent manganese steel castings for general engineering purpose (third revision) |
| (Part 16): 2002/ ISO 8991:1986 | Designation system for fasteners (third revision) | 3039:1988 | Structural steel for construction of hulls of ships (second revision) |
| (Part 17): 1996/ ISO 3269:1988 | Inspection, sampling and acceptance procedure (third revision) | 3613:1974 | Acceptance tests for wire flux combination for submerged arc welding (first revision) |
| (Part 18): 1996 | Packaging (third revision) | 3640:1982 | Specification for hexagon fit bolts (first revision) |
| (Part 19): 1997/ ISO 3800:1993 | Axial load fatigue testing of bolts, screws and studs | 3757:1985 | Specification for high strength structural bolts (second revision) |
| (Part 20): 1996/ ISO 898-7:1992 | Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm | 4000:1992 | Code of practice for high strength bolts in steel structures (first revision) |
| 1387:1993 | General requirements for the supply of metallurgical materials (second revision) | 4326:1993 | Code of practice for earthquake resistance design and construction of buildings (second revision) |
| 1393:1961 | Code of practice for training and testing of oxy-acetylene welders | ||
| 1395:1982 | Low and medium alloy steel covered electrodes for manual metal arc welding (third revision) |
| IS No. | Title | IS No. | Title |
|---|---|---|---|
| 5369 : 1975 | General requirements for plain washers and lock washers (first revision) | (Part 1) : 1974 | Part 1 Fusion welding of steel |
| 5370 : 1969 | Specification for plain washers with outside diameter ≈3× inside dkmeter | 7318 (Part 1) : 1974 | Approval test for welders when weld-ing procedure approval is not required: Part 1 Fusion welding of steel |
| 5372 : 1975 | Taper washers for channels (ISMC) (tjlrst revision) | 7557 : 1982 | Specification for steel wire (upto 20 mm) for the manufacture of cold |
| 5374 : 1975 | Taper washers for I-beams (ISMB) (jlrst revision) | 8000 | forged rivets (first revision) Geometrical tolerancing on technical |
| 5624 : 1993 | Foundation bolts — Specification (first revision) | (Part 1) : 1985/ISO 1101 : 1983 | drawings: Tolerances of form, orientation, loca-tion and run-out, and appropriate geometrical definitions (Jirsf revision) |
| 6240 : 1999 | Hot rolled steel plate (upto6 6 mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders — Specification (third revision) | (Part 2) : 1992/ISO 2692 : 1988 | Maximum material principles (first revision) |
| 6419 : 1996 | Welding rods and bare electrodes for gas shielded arc welding of structural steel (first revision) | (Part 3) : 1992/ISO 1660 : 1987 | Dimensioning and tolerancing of profiles (second revision) |
| 6560 : 1996 | Molybdenum and chromium-molybdenum low alloy steel weldlng rods and bare electrodes for gas shielded arc welding (first revision) | (Part 4) : 1976 | Practical examples of indications on drawings |
| 6610 : 1972 | Specification for heavy washers for steel structures | 8976 : 1978 | Guide for preparation and arrangement of sets of drawings and parts lists |
| 6623 : 2004 | High strength structural nuts — Specification (first revision) | 9077 : 1979 | Code of practice for corrosion protection of steel reinforcement in RB and RCC construction |
| 6639 : 1972 | Specification for hexagonal bolts for steel structures | 9172 : 979 | Recommended design practice for corrosion prevention of steel |
| 6649 : 1985 | Specification for hardened and tempered washers for high strength structural bolts and nuts (@rst revision) | 9295 : 983 | structures Steel tubes for idlers for belt conveyors (@rst revision) |
| 7205 : 1974 | Safety code for erection of structural steelwork | 9595 : 1996 | Metal arc welding of carbon and carbon manganese steels — |
| 7215 : 1974 | Specification for tolerances for fabrication of steel structures | 10748 : 2004 | Recommendations (jirst revision) Hot-rolled steel strip for welded |
| 7280 : 1974 | Specification for bare wire electrodes for submerged arc welding of structural steels | 12843 : 1989 | tubes and pipes — Specification (second revision) Tolerances for erection of steel structures |
| 7307 | Approwd tests for welding procedures: | ||
| (Part 1) : 1974 | Part 1 Fusion welding of steel | SP 6 (1) : 1964 | Handbook for Structural Engineers — Structural Steel Sections |
| 7310 | Approval tests for welders working to approved welding procedures |