IS 800:2007

Overview

IS 800:2007, General Construction in Steel — Code of Practice, published by the Bureau of Indian Standards. Supersedes the second revision of IS 800:1984 (Third Revision). This edition is organised in 26 parts covering structural requirements; open any part below or from the panel on the left.

Table of Contents

1. 01Section 1 General
2. 02Section 2 Materials
3. 03Section 3 General design requirements
4. 04Section 4 Methods of structural analysis
5. 05Section 5 Limit state design
6. 06Section 6 Design of tension members
7. 07Section 7 Design of compression members
8. 08Section 8 Design of members subjected to bending
9. 09Section 9 Member subjected to combined forces
10. 10Section 10 Connections
11. 11Section 11 Working stress design
12. 12Section 12 Design and detailing for earthquake loads
13. 13Section 13 Fatigue
14. 14Section 14 Design assisted by testing
15. 15Section 15 Durability
16. 16Section 16 Fire resistance
17. 17Section 17 Fabrication and erection
18. 18Annex A (Clause 1.1) list of referred indian standards
19. 19Annex B [Clause 4.1.1(c)] analysis and design methods
20. 20Annex C [Clauses 5.2.2.2(b) and 5.6.2] design against floor vibration
21. 21Annex D (Clause 7.2.2) determination of effective length of columns
22. 22Annex E (Clause 8.2.2.1) elastic lateral torsional buckling
23. 23Annex F (Clause 10.6.1) connections
24. 24Annex G (Clause 17.16) general recommendations for steelwork tenders and contracts
25. 25Annex H (Informative) plastic properties of beams
26. 26Amendment No. 1 january 2012