Loading…

Loading…

IS 456:2000

Contents

Section 1 General
Section 2 Materials, workmanship, inspection and testing
Section 3 General design consideration
Section 4 Special design requirements for structural members and systems
Section 5 Structural design (limit state method)
Annex A (Clause 2) list of referred indian standards
Annex B (Clauses 18.2.2, 22.3.1, 22.7, 26.2.1 and 32.1) structural design (working stress method)
Annex C (Clauses 22.3.2, 23.2.1 and 42.1) calculation of deflection
Annex D (Clauses 24.4 and 37.1.2) slabs spanning in two directions
- D-1 Restrained slabs
- D-2 Simply supported slabs
Annex E (Clause 25.2) effective length of columns
Annex F (Clauses 35.3.2 and 43.1) calculation of crack width
Annex G (Clause 38.1) moments of resistance for rectangular and T-sections
- G-1 Rectangular sections
- G-2 Flanged section
Annex H (Foreword) committee composition
Amendment No. 1 june 2001
Amendment No. 2 september 2005
Amendment No. 3 august 2007

Standards BIS IS 456:2000Section 2 Materials, workmanship, inspection and testing

Loading…

SEC-2Section 2 Materials, workmanship, inspection and testing

IS 456:2000, Plain and Reinforced Concrete — Code of Practice

Last Updated 29 Oct 2026

Hover any section to copy its link or text, ask Copilot about it, or bookmark it.

5 MATERIALS
6 CONCRETE
7 WORKABILITY OF CONCRETE
8 DURABILITY OF CONCRETE
9 CONCRETE MIX PROPORTIONING
10 PRODUCTION OF CONCRETE
11 FORMWORK
12 ASSEMBLY OF REINFORCEMENT
13 TRANSPORTING, PLACING, COMPACTION AND CURING
14 CONCRETING UNDER SPECIAL CONDITIONS
15 SAMPLING AND STRENGTH OF DESIGNED CONCRETE MIX
16 ACCEPTANCE CRITERIA
17 INSPECTION AND TESTING OF STRUCTURES