The following additional information shall be provided in the contract documents when AESS is specified:
- (a) Specific identification of members or components that are AESS using the AESS Categories listed in Section 10.1.1 and Table 10.1.
- (b) Fabrication and/or erection tolerances that are to be more restrictive than provided for in this section, if any.
- (c) For Category AESS C, the AESS matrix included in Table 10.1 shall be used to specify the required treatment of the element.
- (d) Any variations from the AESS characteristics of Table 10.1.
- (e) Any other special requirements for AESS members and components, such as the orientation of HSS weld seams and bolt heads.