The following dated versions of documents are referenced in this Code:
AASHTO Specification—2020 AASHTO LRFD Bridge Design Specifications, 9th Edition
ANSI/AISC 341—ANSI/AISC 341-22, AISC Seismic Provisions for Structural Steel Buildings
| ANSI/AISC 360—ANSI/AISC 360-22, AISC Specification for Structural Steel Buildings |
| ASME B46.1—ASME B46.1-19, Surface Texture (Surface Roughness, Waviness, and Lay) |
| AREMA Manual—2021 AREMA Manual for Railway Engineering, Volume II— Structures, Chapter 15 |
| ASTM A6/A6M-19, Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling |
| ASTM A53/A53M-20, Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless |
| ASTM A500/A500M-21, Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
| ASTM A501/A501M-21, Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing |
| ASTM A572/A572M-21e1, Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel |
| ASTM A618/A618M-21, Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing |
| ASTM A847/A847M-20, Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance |
| ASTM A992/A992M-20, Standard Specification for Structural Steel Shapes |
| ASTM A1065/A1065/M-18, Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low-Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point |
| ASTM A1085/A1085M-15, Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS) |
| AWS D1.1/D1.1M—AWS D1.1/D1.1M:2020, Structural Welding Code—Steel |
| AWS D1.5M/D1.5—AWS D1.5M/D1.5:2020, Bridge Welding Code |
| AWS D1.8/D1.8M—AWS D1.8/D1.8M:2021, Structural Welding Code—Seismic Supplement |
| RCSC Specification—Specification for Structural Joints Using High-Strength Bolts, 2020 |
| SSPC SP2—SSPC Surface Preparation Specification No. 2, Hand Tool Cleaning, 2018 |
Commentary
| Additionally, the following dated versions of documents are referenced in the Commentary on this Code: |
| AIA Document E202—2008 Building Information Modeling Protocol Exhibit |
| AIA Document E203—2013 Building Information Modeling and Digital Data Exhibit |
| AIA Document G201—2013 Project Digital Data Protocol Form |
| AIA Document G202—2013 Project Building Information Modeling Protocol Form |
| ASTM A563-15, Standard Specification for Carbon and Alloy Steel Nuts |
ASTM A563M-07(2013), Standard Specification for Carbon and Alloy Steel Nuts (Metric)
ASTM F3125/F3125M-15, Standard Specification for High Strength Structural Bolts, Steel and Alloy Steel, Heat Treated, 120 ksi (830 MPa) and 150 ksi (1040 MPa) Minimum Tensile Strength, Inch and Metric Dimensions
BIMFORUM 2013, Level of Development Specification
CASE Document 962—National Practice Guidelines for the Structural Engineer of Record, 2012
Consensus Docs 301—2013 BIM Addendum
OSHA Safety and Health Regulations for Construction—29 CFR 1926 Subpart R—Steel Erection
SSPC SP6—SSPC Surface Preparation Specification No. 6, Commercial Blast Cleaning, 2015