TO IS 2062 : 2011 HOT ROLLED MEDIUM AND HIGH TENSILE STRUCTURAL STEEL — SPECIFICATION
(Seventh Revision)
(Page 1, clause 1.1.2) — Insert a new sub-clause 1.1.3:
1.1.3 This standard does not include those steels, which are covered by other Indian Standards, examples are as follows:
- a) Steel plates of drawing quality (see IS 1079);
- b) Steels for boilers and pressure vessels (see IS 2002 and IS 2041);
- c) Steels for structural forming and flanging (see IS 5986);
- d) Steels for the manufacture of welded gas cylinders/containers (see IS 6240 and IS 15914);
- e) Steel wire rods for general engineering purposes (see IS 7887);
- f) Steels for manufacture of agricultural tillage discs (see IS 9442);
- g) Steels for welded tubes and pipes (IS 10748 and IS 15647);
- h) Steels for cold rolling purposes (see IS 11513).'
(Page 4, Table 2, col 7) — Substitute ‘5.65 ’ for ‘5.65’.
(Page 4, Table 2, Heading 'Internal Bend Diameter') — Substitute 'Max' for 'Min'.
(Page 6, clauses 10.2.1, line 3) — Substitute ‘5.65 ’ for ‘5.65’.
(Page 6, clause 10.2.1.1, lines 2 and 3) — Substitute ‘5.65 √S₀’ for ‘5.65’.
(MTD 4)