Loading…

IS 2062:2011

Contents

General
Material and Manufacture
Chemical Composition and Sampling
- 8 chemical composition
  8.1 Ladle Analysis
  8.2 Product Analysis
- 9 selection and preparation of test samples
Mechanical Tests
Dimensions and Tolerances
- 15 dimensions
- 16 tolerances
Re-tests, Delivery and Marking
Annex and Amendment
- Annex A (Foreword) committee composition
- Amendment No. 1 november 2012

Standards BIS IS 2062:2011Re-tests, Delivery and Marking

Loading…

Contents

General
Material and Manufacture
Chemical Composition and Sampling
- 8 chemical composition
  8.1 Ladle Analysis
  8.2 Product Analysis
- 9 selection and preparation of test samples
Mechanical Tests
Dimensions and Tolerances
- 15 dimensions
- 16 tolerances
Re-tests, Delivery and Marking
Annex and Amendment
- Annex A (Foreword) committee composition
- Amendment No. 1 november 2012

Standards BIS IS 2062:2011Re-tests, Delivery and Marking

18calculation of mass

IS 2062:2011, Hot Rolled Medium and High Tensile Structural Steel — Specification

Last Updated 29 Oct 2026

Hover any section to copy its link or text, ask Copilot about it, or bookmark it.

The mass of steel shall be calculated on the basis that steel weighs 7.85 g/cm³.

Loading…

IS 2062:2011, Hot Rolled Medium and High Tensile Structural Steel — Specification

Last Updated 29 Oct 2026

Hover any section to copy its link or text, ask Copilot about it, or bookmark it.

The mass of steel shall be calculated on the basis that steel weighs 7.85 g/cm³.