(Clause 9.1)
All dimensions in millimetres.
Figure description:
Technical diagram of a T-joint pipe fitting:
- Entities: Main run (labeled 1 and branch (labeled 2.
- Dimension A: Distance from the branch centerline to the ends of the main run.
- Dimension B: Distance from the main run centerline to the top of the branch.
- Units: All dimensions are in millimetres.
Figure description:
Technical diagram of a pipe fitting, specifically a tee increasing on the branch.
- Entities:
- Horizontal ends: Labeled 1.
- Vertical ends: Labeled 2.
- Dimensions:
- A: Center-to-end distance for horizontal run outlets (1.
- B: Center-to-end distance for vertical branch outlets (2.
Tee increasing (on the branch)
Cross, Reducing | SI: No.=i) | Nominal: Size of=6 x 8 | Minimum: Length, Centre=22, Length, Centre=21 | SI: No.=ii) | Nominal: Size of=8 x 10 | Minimum: Length, Centre=24, Length, Centre=22 | SI: No.=iii) | Nominal: Size of=10 x 15 | Minimum: Length, Centre=32, Length, Centre=27 | SI: No.=iv) | Nominal: Size of=15 x 20 | Minimum: Length, Centre=35, Length, Centre=32 | SI: No.=v) | Nominal: Size of=15 x 25 | Minimum: Length, Centre=43, Length, Centre=35 | SI: No.=vi) | Nominal: Size of=20 x 25 | Minimum: Length, Centre=43, Length, Centre=38 | SI: No.=vii) | Nominal: Size of=25 x 32 | Minimum: Length, Centre=51, Length, Centre=44 | SI: No.=viii) | Nominal: Size of=25 x 40 | Minimum: Length, Centre=52, Length, Centre=44 | SI: No.=ix) | Nominal: Size of=32 x 40 | Minimum: Length, Centre=52, Length, Centre=49 | SI: No.=x) | Nominal: Size of=40 x 50 | Minimum: Length, Centre=64, Length, Centre=56 | SI: No.=xi) | Nominal: Size of=50 x 65
| No. | Size of | Length, Centre | |
|---|---|---|---|
| SI | i) | ||
| Nominal | 6 x 8 | ||
| Minimum | 21 | ||
| SI | ii) | ||
| Nominal | 8 x 10 | ||
| Minimum | 22 | ||
| SI | iii) | ||
| Nominal | 10 x 15 | ||
| Minimum | 27 | ||
| SI | iv) | ||
| Nominal | 15 x 20 | ||
| Minimum | 32 | ||
| SI | v) | ||
| Nominal | 15 x 25 | ||
| Minimum | 35 | ||
| SI | vi) | ||
| Nominal | 20 x 25 | ||
| Minimum | 38 | ||
| SI | vii) | ||
| Nominal | 25 x 32 | ||
| Minimum | 44 | ||
| SI | viii) | ||
| Nominal | 25 x 40 | ||
| SI | ix) | ||
| Nominal | 32 x 40 | ||
| Minimum | 49 | ||
| SI | x) | ||
| Nominal | 40 x 50 | ||
| Minimum | 56 | ||
| SI | xi) | ||
| Nominal | 50 x 65 | ||
| Minimum | 67 | ||
| SI | xii) | ||
| Nominal | 50 x 80 | ||
| Minimum | 73 | ||
| SI | xiii) | ||
| Nominal | 65 x 80 | ||
| Minimum | 79 | ||
| SI | xiv) | ||
| Nominal | 80 x 100 | ||
| Minimum | 95 | ||
| Nominal | 8 x 6 | ||
| Nominal | 10 x 8 | ||
| Minimum | 24 | ||
| Nominal | 15 x 10 | ||
| Nominal | 20 x 15 | ||
| Nominal | 25 x 15 | ||
| Minimum | 43 | ||
| Nominal | 25 x 20 | ||
| Nominal | 32 x 15 | ||
| Minimum | 51 | ||
| Nominal | 32 x 25 | ||
| Nominal | 40 x 15 | ||
| Minimum | 52 | ||
| Nominal | 40 x 25 | ||
| Nominal | 50 x 25 | ||
| Minimum | 64 | ||
| Nominal | 50 x 40 | ||
| Nominal | 65 x 50 | ||
| Minimum | 76 | ||
| Nominal | 80 x 40 | ||
| Minimum | 89 | ||
| SI | xv) | ||
| Nominal | 80 x 50 | ||
| SI | xvi) | ||
| Nominal | 100 x 50 | ||
| Minimum | 115 | ||
| SI | xvii) | ||
| Nominal | 100 x 80 | ||
| SI | xviii) | ||
| Nominal | 125 x 80 | ||
| Minimum | 140 | ||
| SI | xix) | ||
| Nominal | 125 x 100 | ||
| SI | xx) | ||
| Nominal | 150 x 80 | ||
| Minimum | 160 | ||
| SI | xxi) | ||
| Nominal | 150 x 100 |