IS 1239 (Part 2):2011

Overview

IS 1239 (Part 2):2011, Steel Tubes, Tubulars and Other Steel Fittings — Specification, Part 2 Steel Pipe Fittings, published by the Bureau of Indian Standards. Supersedes the fourth revision of IS 1239 (Part 2) (Fifth Revision). This edition is organised in 19 parts covering structural requirements; open any part below or from the panel on the left.

Table of Contents

1. 01Amendment No. 1 september 2012
2. 021 SCOPE
3. 032 references
4. 043 terminology
5. 054 designation
6. 065 supply of material
7. 076 manufacture
8. 087 chemical COMPOSITION
9. 098 dimensions of tubulars
10. 109 dimensions of steel fittings (other than tubulars)
11. 1110 joints
12. 1211 tests on fittings and sockets
13. 1312 sampling of tubulars, sockets
14. 1413 GALVANIZING
15. 1514 workmanship
16. 1615 marking
17. 17Annex A (Foreword) nominal size of pipe threads and corresponding nominal bores of pipes
18. 18Tables
19. 19Formulas