This Appendix provides guidance through the reference documents listed below.
D.2 Reference Documents
| Document Number | Document Title |
|---|---|
| HeliCoil® Technical Bulletin 68-2 (Emhart Teknologies, Shelton, Connecticut) | |
| Hahn, Gerald J.; Shapiro, Samuel S. (1967). Statistical Models in Engineering. New York: John Wiley & Sons, Inc. | |
| Hess, D. P. “Threaded Fastener Secondary Locking Requirements.” Journal of Failure Analysis and Prevention, Volume 17, Number 4 | |
| Nassar, S. A.; Ganganala, M. “Effect of Separating Load Eccentricity on the Clamp Load Loss in a Bolted Joint Using a Strain Hardening Model.” ASME Journal of Pressure Vessel Technology. (Reviewed and accepted manuscript #PVT-09-1060.) | |
| Odeh, Robert E.; Owen D. B. (1980). Tables for Normal Tolerance Limits, Sampling Plans and Screening. New York: Marcel Dekker, Inc. | |
| Spiegel, Murray R. (1961). Schaum’s Outline of Theory and Problems of Statistics. New York: McGraw-Hill Book Company | |
| Stronge, William James; Yu, Tongxi. (1993). Dynamic Models for Structural Plasticity. London, Great Britain: Springer-Verlag | |
| AND 10476 | Washer – Limitations on Usage of Lock |
| Document Number | Document Title |
| ASME B18.12-2001 | Glossary of Terms for Mechanical Fasteners |
| ASTM D5363-03 | Standard Specification for Anaerobic Single- Component Adhesives (AN) |
| FAA AC 20-71 | Dual Locking Devices on Fasteners |
| FAA AC 23.607-1 | Self-Locking Nuts on Bolts Subject to Rotation |
| FED-STD-H28 | Screw-Thread Standards for Federal Services |
| HST-TR-010334 | Cooper, James. (August 4, 2008). Arathane Thread Locking Vibration Test Report. Greenbelt, MD: NASA Goddard Space Flight Center. |
| JSC-28918 | EVA Design Requirements and Considerations |
| MIL-DTL-18240 | Fastener Element, Self-Locking, Threaded Fastener, 250° F Maximum |
| MIL-HDBK-60 | Threaded Fasteners-Tightening to Proper Tension |
| MIL-I-45914 | Insert, Screw Thread – Locked In, Key Locked, General Specification For |
| MIL-I-45932 | Insert, Screw Thread, Thin Wall, Locked In, General Specification For |
| MIL-PRF-23377 | Primer Coatings: Epoxy, High-Solids |
| MIL-S-22473E (Cancelled. Future acquisitions for this item may refer to ASTM- D5363. Users are cautioned to evaluate replacements for their particular application.) | Sealing, Locking, and Retaining Compounds: (Single Component) |
| MIL-S-46163A (Superseded by ASTM- D5363) | Sealing, Lubricating and Wicking Compounds: Thread-Locking, Anaerobic, Single-Component |
| Document Number | Document Title |
| MS 51830 | Insert, Screw - Thread, Locked in, Key-Locked, Miniature and Lightweight |
| MS 51831 | Insert, Screw - Thread, Locked in, Key-Locked, Miniature and Lightweight Insert, Screw - Thread, Locked in, Key-Locked, Miniature and Lightweight |
| MS 51832 | Insert, Screw-Thread, Locked In, Key-Locked, Extra Heavy Duty |
| NAS 618 | Fastener – Recommended Shank, Hole, and Head-to-shank Fillet Radius Limits For |
| NAS 1068 (Not for New Design) | Nut, Self-Locking Plate, Two Lug, Low Height, C'Bored, Floating, Reduced Rivet Spacing |
| NAS 1189 | Screw, Self-Locking, Flat 100 Degree Head, Cruciform and Offset Cruciform Recess, Full Thread |
| NAS 1291 | Nut, Self-Locking, Hexagon – Low Height, Light Weight |
| NAS 1351 | Screw, Cap, Socket Head, Undrilled and Drilled, Plain and Self-Locking, Alloy Steel, Corrosion- Resistant Steel and Heat-Resistant Steel, UNRF-3A |
| NAS 1773 | Nut, Self-Locking, Plate, Two Lug, Low Height, C'Bored, Floating, 160 ksi, 450 Degrees F, 800 Degrees F |
| NAS 1774 | Nut, Self-Locking, Plate, One Lug, Low Height, C'Bored, Floating, 160 ksi, 450 Degrees F, 800 Degrees F |
| NAS 1956 | Bolt, Shear, Hexagon Head, 108 ksi Shear, Long Thread |
| NAS 3350 | Nuts, Self-Locking, 450 Degrees F and 800 Degrees F, High Quality |
| Document Number | Document Title |
| NAS 6703–NAS 6720 | Bolt, Tension, Hex Head, Close Tolerance, A286 CRES, Long Thread, Reduced Major Thread Diameter, Self-Locking and Nonlocking, 160 ksi Ftu |
| NAS 8100-NAS 8106 | Screw, Pan Head, Cruciform Recess, A-286 CRES, Full Thread, Self-Locking and Non Locking |
| NAS 15981 | Fasteners, Externally Threaded, Self-Locking Design and Usage Limitations |
| NASA-STD-5001 | Structural Design and Test Factors of Safety for Spaceflight Hardware |
| NASA-STD-5005 | Standard for the Design and Fabrication of Ground Support Equipment |
| NASA-STD-5019 | Fracture Control Requirements for Spaceflight Hardware |
| NASA-STD-8739.1 | Workmanship Standard for Polymeric Application on Electronic Assemblies |
| NASA TM-108377 | The Mechanism of Bolt Loading |
| NASA/TM-2012-217454 | Aerospace Threaded Fastener Strength in Combined Shear and Tension Loading |
| NASM 8846 | Inserts, Screw-Thread, Helical Coil |
| NASM 21043 | Nut, Self-Locking, 800 Degrees F, Reduced Hexagon, Reduced Height, Ring Base, Corrosion Resistant Steel |
| NASM 21045 | Nut, Self-Locking Hexagon – Regular Height, 450 Degrees F, 125 ksi Ftu |
| NASM 21046 | Nut, Self-Locking, Hexagon - Regular Height, 800 Degrees F, 125 ksi Ftu |
| NASM 25027 | Nut, Self-Locking, 250 Degrees F, 450 Degrees F, and 800 Degrees F |
| Document Number | Document Title |
| NASM 33540 | Safety Wiring, Safety Cabling, Cotter Pinning, General Practices for |
| NASM 33588 | Nut, Self-Locking, Aircraft, Reliability and Maintainability Usage Requirements For |
| NSTS 08307 | Criteria for Preloaded Bolts, NASA Johnson Space Center, Revision A, July 6, 1998 |
| SAE AIR 1754A | Washer, Thermal Compensating, Metric Series |
| SAE AS567K | Safety Cable, Safety Wire, Key Washers, and Cotter Pins for Propulsion Systems, General Practices for Use of |
| VDI 2230 | “Systematic Calculation of High Duty Bolted Joints, Joints with One Cylindrical Bolt.” (February 2003). Düsseldorf, Germany: Verein Deutscher Ingenieur. |