Annex L (informative) Bibliography

• [1] ISO 5725-2:1994, Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurment method.
• [2] Guide to the expression of uncertainty in measurement, BIPM/IEC/IFCC/ISO/IUPAC/IUPAP/OIML.
• [3] M.S. LOVEDAY (1992) "Towards a tensile reference material", Chapter 7, pp. 111-153 in Harmonisation of Testing Practice for High Temperature Materials, Ed. M.S. LOVEDAY and T.B. GIBBONS, Chapman and Hall (formerly published by Elsevier Applied Science).
• [4] P.J. CAMPION, J.E. BURNS and A. WILLIAMS (1980) "A code of practice for the detailed statement of accuracy", National Physical Laboratory, ISBN 0 950 4496 6 0.
• [5] R.F. JOHNSON and J.D. MURRAY (1966) "The effect of rate of straining on the 0,2 % proof stress and lower yield stress of steel", Symposium on High Temperature Performance of Steels", Eastbourne 1966, Iron & Steel Institute, 1967.
• [6] T.G.F. GRAY and J. SHARP (1988) "Influence of machine type and strain-rate interaction in tensile testing", ASTM Symposium on Precision of Mechanical Tests, STP 1025.
• [7] ASTM Research Report RR E - 28 1004 (March 1984) - Round Robin Results of Interlaboratory Tensile Tests.
• [8] L. ROESCH, N. COUE, J. VITALI, M. DI FANT - Results of an Interlaboratory Test Programme on Room Temperature Tensile Properties - Standard Deviation of the Measured Values - IRSID Report N. DT. 93310 (July 1993).

( Continued from second cover)

In reporting the results of a test or analysis made in accordance with this standard, if the final value, observed or calculated, is to be rounded off, it shall be done in accordance with IS 2 : 1960 'Rules for rounding off numerical values ( revised )'.