The purpose of this appendix is to identify relevant guidance documents for application of this NASA Technical Standard. This is not intended to be an exhaustive listing of all the documents the hardware developer may find useful in implementing this NASA Technical Standard. The latest issuances of cited documents apply unless specific versions are designated.
B.2 GOVERNMENT DOCUMENTS Department of Defense
MIL-HDBK-6870, Nondestructive Inspection Program Requirements for Aircraft and Missile Materials and Parts
DOT
DOT Title 49, Code of Federal Regulations Title 49, Transportation
MMPDS, Metallic Material Properties Development and Standardization
NASA
NASA-HDBK-5010, Fracture Control Implementation Handbook for Payloads, Experiments, and Similar Hardware
NASA-HDBK-5010A, Volume 1, Fracture Control Implementation Handbook for Spaceflight Hardware: Guidance for Implementation
NASA-HDBK-5010A, Volume 2, Fracture Control Implementation Handbook for Spaceflight Hardware: Example Applications and Additional Guidelines
MSFC-RQMT-3479, Fracture Control Requirements for Composite and Bonded Vehicle and Payload Structures
NPR 7120.5, NASA Space Flight Program and Project Management Handbook
PRC-6509, Process Specification for Eddy Current Inspection
Controlled by: NASA
B.3 NON-GOVERNMENT DOCUMENTS
AIA/ NAS
NA0026, Procurement Specification Metric Fasteners, A-286 CRES Externally Threaded, 1100 MPa Tensile, 660 MPa Shear
NA0271, Metric Fasteners, CRES 300 Series, Externally Threaded, MJ Thread, 500 MPa Ftu and 700 MPa Ftu
NAS4003, Fastener, A286 Corrosion Resistant Alloy, Externally Threaded, 160 KSI Ftu, 95 KSI Fsu, 1000 °F
NASM85604, Bolt, Nickel Alloy 718, Tension, High Strength, 125 KSI Fsu and 220 KSI Ftu, High Temperature, Spline Drive
American Petroleum Institute (API)
API 579-1/ASME FFS-1, Fitness-For-Service
American Society of Mechanical Engineers (ASME)
ASME BPVC-VIII-1, Boiler Pressure Vessel Code, Section VIII, Rules for Construction of Pressure Vessels Division 1
ASME BPVC-VIII-2, Boiler Pressure Vessel Code, Section VIII, Rules for Construction of Pressure Vessels Division 2-Alternative Rules
ASTM International (formerly American Society for Testing and Materials)
ASTM E399, Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials
ASTM E561, Standard Test Method for K-R Curve Determination
ASTM E1681, Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM E740/E740M, Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
ASTM E1820, Standard Test Method for Measurement of Fracture Toughness
Controlled by: NASA ASTM E1823, Standard Terminology Relating to Fatigue and Fracture Testing
ASTM E2899, Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
SAE
AS7468, Bolts, Cobalt-Chromium-Nickel Alloy, UNS R30035, Tensile Strength 260 Ksi, Procurement Specification
B.4 OTHER DOCUMENTS
Boyer, R.R.; Spurr, W.F. (January 1978). “Characteristics of Sustained-Load Cracking and Hydrogen Effects in Ti-6Al-4V,” Metallurgical Transactions A. Vol. 9A, pp. 23-29.
Lewis, J.C.; Kenny, J.T. (July 1976). Sustained Load Crack Growth Design Data for Ti-6Al-4V Titanium Alloy Tanks Containing Hydrazine. Paper presented at AIAA/SAE 12th Propulsion Conference. Palo Alto, CA.