The following dated normative documents are called by the requirements of this ECSS Standard and therefore constitute requirements to it. Subsequent amendments to, or revisions of any of these publications do not apply.
NOTE However, parties to agreements based on this ECSS Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below.
ECSS-S-ST-00-01C ECSS system - Glossary of terms ECSS-E-ST-30-01C Space engineering - Fracture control ECSS-Q-ST-70C Space product assurance - Materials, parts and processes ECSS-Q-ST-70-02C Space product assurance - Thermal vacuum outgassing test for the screening of space materials ECSS-Q-ST-70-29C Space product assurance - The determination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment ECSS-Q-ST-70-36C Space product assurance - Material selection for controlling stress-corrosion cracking ECSS-Q-ST-70-37C Space product assurance - Determination of the susceptibility of metals to stress- corrosion cracking ECSS-Q-ST-70-71C Space product assurance - Data for selection of space materials ISO 204 Metallic materials - Uninterrupted uniaxial creep testing in tension - Method of test ISO 225 Fasteners - Bolts, screws, studs and nuts - Symbols and designations of dimensions ISO 1502 ISO general - purpose metric screw threads - Gauges and gauging ISO 2859-1 Sampling procedures for inspection by attributes, Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
Figure description:
- Text: E CSS
- Colors: Blue and white
- Design: A blue-bordered parallelogram divided into two sections. The left section is white with a blue italicized "E", and the right section is blue with white "CSS" in a serif font.
| ISO 2859-2 | Sampling procedures for inspection by attributes, Part 2: Sampling plans indexed by limiting quality (LQ), for isolated lots inspection |
| ISO 3353-1:2002 | Aerospace — Lead and runout threads — Part 1: Rolled external threads |
| ISO 3800 | Threaded fasteners — Axial load fatigue testing — Test methods and evaluation of results |
| ISO 4759-1 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
| ISO 6157-2 | Fasteners — Surface discontinuities — Part 2: Nuts |
| ISO 6157-3 | Fasteners — Surface discontinuities — Part 3: Bolts, screws and studs for special requirements |
| ISO 6506-1 | Metallic materials — Brinell hardness test — Part 1: Test method |
| ISO 6506-2 | Metallic materials — Brinell hardness test — Part 2: Verification and calibration of testing machines |
| ISO 6506-3 | Metallic materials — Brinell hardness test — Part 3: Calibration of reference blocks |
| ISO 6507-1 | Metallic materials — Vickers hardness test — Part 1: Test method |
| ISO 6507-2 | Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines |
| ISO 6507-3 | Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks |
| ISO 6508-1 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 6508-2 | Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines |
| ISO 6508-3 | Metallic materials — Rockwell hardness test — Part 3: Calibration of reference blocks |
| ISO 9140 | Aerospace — Nuts, plain or slotted (castellated) — Test methods |
| DIN ISO 9152 | Aerospace — Bolts, with MJ Threads, in Titanium alloys, strength class 1100 MPa – Procurement specification |
| ASTM B 117-07a | Standard practice for operating salt spray (fog) apparatus |
| ASTM E 1417-05e1 | Standard practice for liquid penetrant testing |
| ASTM E 1444-05 | Standard practice for magnetic particle testing |